• 한국의류산업학회지
• /
• 제15권3호
• /
• pp.414-422
• /
• 2013

This study identifies the foot shapes of elderly men by classifying foot types according to the shapes of sole of foot and analyzing individual characteristics. The subjects were 269 elderly men over 60 years of age. Their right feet were measured indirectly with a 2D scanner. The anthropometric measuring items consisted of 38 items that were estimated on the right foot of each subject. The 2D scan data were analyzed by various statistical methods such as factor analysis, ANOVA and cluster analysis using the statistical program SPSS 19.0. A total of 8 factors were extracted through a factor analysis and these factors represent 77.83% of total variance. The 8 factors were: ball and lateral foot protrusion, ball gradient, medial foot protrusion, anterior and posterior foot length ratio, lateral ball length, heel size, toes breadth, and foot length, that explained 77.83% of the total variance. A total of 4 clusters (as their sole type) were categorized using 8 factor scores by cluster analysis. Type 1 was classified as H-type(toes width, foot width, heel width uniform and medial malleolus and lateral malleolus almost no protrusion). Type 2 was classified as V-type(foot width and toes width, wide and heel width narrow). Type 3 was classified as A-type(foot width and heel width, wide but toes width narrow, protruded inside). Type 4 was classified as D-type(protruded outside).

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.136-141
• /
• 2012

'Jikjisimcheyocheal (Jikji afterwards)' is known as a first book printed by the metal type in the world. The metal type used for printing this book has not been found yet. To help for replicating the original metal type, it is required to investigate the composition analysis of the copied metal type. In this study, the composition analysis and thermodynamic care for replicating of ancient metal type was performed on the basis of an analytical reports concerned with the ancient metal type which made after Jikji printing. Metal types were made by remelting and casting of the mother alloy which came from a cast of a mixed metals in accordance with the composition revealed in the literatures. Change of composition during remelting of mother alloy and casting of metal was detected by the EDS analysis. The reasons for variation in composition were discussed by metallurgical and thermodynamic point of view, and a mixing ratio of metals to get the original composition of ancient metal type is suggested. Some attention should be paid on mixing, melting and casting of metals to get an objected composition for copy of ancient metal type.

• 한국정밀공학회지
• /
• 제33권12호
• /
• pp.979-984
• /
• 2016

Recently, ball screws have been used in machine tools, robot parts, and medical instruments. The demand for ball screws of high precision and reduced size is increasing because of the growth of high value-added industries. Three types of ball screws are typically used: deflector type, end-cap type, and tube type. They are also classified from C0 to C9 according to the precision level. A deflector type ball screw can reduce the variation of rotational torque and the size of the nut of the ball screw is minimized. To ensure the reliable design of ball screws, it is important to perform a structural analysis. The purpose of this study is to perform a stability evaluation through analysis of a deflector type miniature ball screw for weapon systems. The analysis is performed through Finite Elements Method (FEM) simulation to predict characteristics such as deformation, stress, and thermal effects. The interference between the shaft and the deflector for smooth rotation are also studied. Based on the results of the analysis, the development of the deflector type miniature ball screw for weapon systems is performed.

• 한국의류학회지
• /
• 제19권6호
• /
• pp.1027-1039
• /
• 1995

Clothing fitness is strongly required in the apparel industry, and draping is an effective tool to increase fitness to the wearers. A more sophisticated and systematic information of the somatotype, accordingly, is necessary for better cress form design. This study was performed to provide fundamental data on middle aged women's upper torso for dress form designers and pattern makers by classifying the somatotype based on each individual's lateral view, and analyzing the characteristics of their somatotype. Data were analyzed by factor analysis, cluster analysis, analysis of variance. Factor analysis was used to 23 items from photometric measurment and cluster analysis was applied for classification of upper torso forms. Through cluster analysis using 5 factor scores, 3 somatotypes were categorized from th lateral view 1) Type I was straight somatotype in which the plumb line passes throught the lobe of the ear, the shoulder joing and the mid abdominal region laterally. This type of woman was slender and shorter than average. 2) Type II was bending somatotype in which the upper portion of upper torso is bent forward. This type of woman was taller and fatter than average. 3) Type III was swayback somatotype in which the upper portion of protruding point on the back is bent forward but the lower portion of protruding point had characteristic of turning over somatotype. This type of woman had storter length on the front and longer lenght on the back, slender type and flat chest.

• 복식문화연구
• /
• 제13권1호
• /
• pp.6-17
• /
• 2005

The purpose of this research is to define low body shapes of Plus-sized women at ages between 21 and 69 whose satisfied the Plus-sized judgment criteria took part in this study. This research also classifies different body types, and provides basic data for designing skirt's and slacks' prototypes according to each body type. Based on factor analysis of the measured data, seven key factors are grouped. And four different body types are classified based on the cluster analysis using factor marks. Type 1 refers to those who are tall in stature and balanced. This body type is characterized by trapezoid body shape when looked from the front, and slim the abdomen, bulge the belly and flat the buttocks when looked from the side. Type 2 refers to short and an obese body shapes, with trapezoid front and bulge abdomen and belly and flat the buttocks. Type 3 refers to those who are of medium height and long-legged body shapes, with rectangular front, protruding belly and buttocks. Type 4 refers to obese body shapes, with rectangular front, protruding abdomen and belly, flat the buttocks. 9 items are available to judge Plus-sized women's low body types and the hit ratio is 93.5%.

• 소성∙가공
• /
• 제18권1호
• /
• pp.39-44
• /
• 2009

This paper is concerned with forming technology of an automotive front side member part with ultra high strength steel sheet of DP980. The forming technology considered in this paper is the draw & form type, which installs the upper pad and lower pad to produce the complicated shape of ultra high strength steel sheet. In order to produce sound product, comparison between form type and draw & form type and between draw type and draw & form type are investigated by FE-analysis. FE-analysis is carried out with commercial sheet metal forming analysis S/W, DYNAFORM. It was shown from FE-analysis that the draw & form type satisfied the required specifications such as the dimensional accuracy and soundness of automotive front side member part. The effectiveness of the analytical result was verified by the experiment. From this investigation, the draw & form type is proved to be able to supply useful forming technology in forming ultra high strength steel.

• 한국자동차공학회논문집
• /
• 제21권5호
• /
• pp.104-112
• /
• 2013

This study investigates the structural analysis result with vibration and fatigue on 3 kinds of bicycle saddle models. When the static load applies on the upper plane of model, maximum stress becomes within the allowable stress in case of model 1. As the value of Stress or deformation becomes lower on the order of model types 1, 2 and 3, these models become more stabilized or safer at durability in this order. On the vibration analysis, model type 1 has the maximum stress or deformation more than 5 times by comparing with model type 1 or 2. Model type 1 becomes most excellent on vibration durability. As maximum displacement due to vibration happens in case of model type 3, it becomes unstabilized. But the stresses of model types 1, 2 and 3 become within the allowable stress and these models are considered to be safe. At the status of the severest fatigue load, model type 3 becomes safer than model type 1 or 2. This study result is applied with the design of safe bicycle saddle and it can be useful to improve the durability by predicting prevention against the deformation due to its vibration and fatigue.

• 근관절건강학회지
• /
• 제27권3호
• /
• pp.325-332
• /
• 2020

Purpose: This study attempted to classify the potential layer for pain in the middle-aged and elderly based on the seventh Aging Research Panel Survey (2018) data and to identify the degree of depression by potential layer. Methods: This study used data from the 2018 Aging Research Panel Survey, whose participants included 6,890 middle-aged and elderly people. The data were analyzed using SPSS/WIN 22.0 and M-plus 8.0 for latent profile analysis. Results: In the study, Type 1 was a "general pain group", Type 2 was the "high back pain group", Type 3 was the "lower body pain group", Type 4 was the "shoulder pain group", and Type 5 was the "pain-free group", which included those who answered that there was no pain. Second, it was found that the variables such as gender, age, education, or not alone were statistically significant (p<.001). Third, the difference in income, subjective health conditions, depression according to the pain site type group were confirmed. Depression was significantly higher in the back pain group, lower body pain group, and shoulder pain group compared to the pain-free group. Conclusion: Developing integrative interventions is necessary to reduce depression using the pain coping skills in middle-aged and Elderly.

• Geomechanics and Engineering
• /
• 제36권1호
• /
• pp.71-81
• /
• 2024

This study analyzes the pull-out behavior of tunnel-type anchorage under various joint conditions, including joint direction, spacing, and position, using a finite element analysis. The validity of the numerical model was evaluated by comparing the results with a small-scaled model test, and the results of the numerical analysis and the small-scaled model test agree very well. The parametric study evaluated the quantitative effects of each influencing factor, such as joint direction, spacing, and position, on the behavior of tunnel-type anchorage using pull-out resistance-displacement curves. The study found that joint direction had a significant effect on the behavior of tunnel-type anchorage, and the pull-out resistance decreased as the displacement level increased from 0.002L to 0.006L (L: anchorage length). It was confirmed that the reduction in pull-out resistance increased as the number of joints in contact with the anchorage body increased and the spacing between the joints decreased. The pull-out behavior of tunnel-type anchorage was thus shown to be significantly influenced by the position and spacing of the rock joints. In addition, it is found that the number of joints through which the anchorage passes, the wider the area where the plastic point occurs, which leads to a decrease in the resistance of the anchorage.

• 동아시아식생활학회지
• /
• 제23권6호
• /
• pp.862-870
• /
• 2013

This study examines the effect of communication type of food service employees on the self-efficiency and organizational commitment. To accomplish the purpose of the study, a survey was conducted to employees of food service companies located in Seoul, from August 5, 2013 to August 25, 2013 as a method of empirical study. The results of this study was analyzed using the SPSS WIN 12.0 and statistical reliability analysis, factor analysis, frequency analysis, correlation analysis and multiple regression analysis were conducted for hypothesis verification. The analysis results of this study are as follows. First, the R-square of regression result for 'communication type will have a positive effect on self-efficiency' was .220. Also, it was found that factors of consideration (Beta=.286, t=5.622), instruction (Beta=.303, t=5.970) and business (Beta=.214, t=4.217) had positive effects on self-efficiency. Values for factors of consideration and instruction were higher than business. Second, the R-square of regression result for 'communication type will have a positive effect on organizational commitment' was .429. Also, it was found that factors of consideration (Beta=.453, t=10.428), instruction (Beta=.380, t=8.749) and business (Beta=.282, t=6.477) had positive effects on organizational commitment. Values for factors of instruction and business were high but value of consideration factor turned out the highest. Third, the R-square of regression result for 'self-efficiency will have a positive effect on organizational commitment' was .334. Also, it was found that out of the factors of positivity (Beta=.369, t=8.423), confidence (Beta=.415, t=8.833) and negativity (Beta=-.072, t=-1.536), positivity and confidence had positive effects on organization commitment, and only positivity and confidence showed high values in organization commitment. Upon analyzing the effect of factors of self-efficiency (positivity, confidence, negativity) on organizational commitment, it was found that positivity and confidence showed high relevance but the negativity factor did not have any correlation.