• The Journal of Advanced Prosthodontics
• /
• v.15 no.6
• /
• pp.281-289
• /
• 2023

PURPOSE. This study aimed to predict the positional coordinates of incisor points from the scan data of conventional complete dentures and verify their accuracy. MATERIALS AND METHODS. The standard triangulated language (STL) data of the scanned 100 pairs of complete upper and lower dentures were imported into the computer-aided design software from which the position coordinates of the points corresponding to each landmark of the jaw were obtained. The x, y, and z coordinates of the incisor point (X_P, Y_P, and Z_P) were obtained from the maxillary and mandibular landmark coordinates using regression or calculation formulas, and the accuracy was verified to determine the deviation between the measured and predicted coordinate values. Y_P was obtained in two ways using the hamularincisive-papilla plane (HIP) and facial measurements. Multiple regression analysis was used to predict Z_P. The root mean squared error (RMSE) values were used to verify the accuracy of the X_P and Y_P. The RMSE value was obtained after crossvalidation using the remaining 30 cases of denture STL data to verify the accuracy of Z_P. RESULTS. The RMSE was 2.22 for predicting X_P. When predicting Y_P, the RMSE of the method using the HIP plane and facial measurements was 3.18 and 0.73, respectively. Cross-validation revealed the RMSE to be 1.53. CONCLUSION. Y_P and Z_P could be predicted from anatomical landmarks of the maxillary and mandibular edentulous jaw, suggesting that Y_P could be predicted with better accuracy with the addition of the position of the lower border of the upper lip.

• Journal of Environmental Health Sciences
• /
• v.49 no.6
• /
• pp.324-333
• /
• 2023

Background: Human exposure to phthalates in indoor environments occurs via dermal absorption, oral ingestion of indoor dust, and inhalation of indoor air. However, systematic studies to investigate the exposure rate to phthalates among the three exposure routes in indoor environments are currently limited. Objectives: A theoretical exposure ratio between inhalation and oral exposure was calculated based on the total amount of di(2-ethyl-hexyl) phthalate (DEHP) emitted into indoor air and deposited into floor dust in a test house. Methods: Flooring and wallpaper containing DEHP were installed in a test house and the concentration of DEHP in both indoor air and floor dust were monitored for five months. Based on the measured DEHP concentrations, the theoretical total amount ratio of DEHP that could be exposed through inhalation and oral ingestion was calculated. Results: Considering the period of operation in the test house, the theoretical total amount of DEHP through inhalation and oral ingestion exposures in the entire test house space was calculated to be 0.014 mg and 5.5 mg, respectively. The exposure ratio of the two routes between inhalation and oral exposure corresponding to the total DEHP amount in flooring and wallpaper was 6.0×10^-7% and 2.3×10^-4%, indicating that theoretical oral exposure to DEHP is approximately 380 times higher than inhalation. Conclusions: Monitoring results from a test house has shown that oral exposure is the main exposure route for DEHP in indoor environments. The experimental design employed in this study and theoretical exposure ratio obtained can be applied to investigate actual exposure to DEHP and to determine the exposure characteristics of various types of semi-volatile organic compounds.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.6
• /
• pp.182-192
• /
• 2023

In this study, the efficacy of Engineered Cementitious Composite(ECC) jacket for masonry fences subjected to lateral dynamic load was experimentally verified through a shaking table test, comparing it with the performance of an unreinforced masonry(URM) fence. Firstly, dominant frequencies, modal damping ratios and deformed shapes were identified through an impact hammer test. URM and ECC-strengthened fences with heights of 940mm and 970mm had natural frequencies of 6.4 and 35.3Hz, and first modal damping ratios of 7.0 and 5.3%, respectively. Secondly, a shaking table test was conducted in the out-of-plane direction, applying a historical earthquake, El Centro(1940) scaled from 25 to 300%. For the URM fence, flexural cracking occurred at the interface of brick and mortar joint(i.e., bed joint) at the ground motion scaled to 50%, and out-of-plane overturning failure followed during the subsequent test conducted at the ground motion scaled to 30%. On the other hand, the ECC-jacketed fence showed a robust performance without any crack or damage until the ground motion scaled to 300%. Finally, the base shear forces exerted upon the URM and ECC-jacketed fences by the ground motions scaled to 25~300% were evaluated and compared with the ones calculated according to the design code. In contrast to the collapse risk of the URM fence at the ground motion of 1,000-year return period, the ECC-jacketed fence was estimated to remain safe up to the 4,800-year return period ground motion.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.137-144
• /
• 2023

Cyberattack technology is evolving to an unpredictable degree, and it is a situation that can happen 'at any time' rather than 'someday'. Infrastructure that is becoming hyper-connected and global due to cloud computing and the Internet of Things is an environment where cyberattacks can be more damaging than ever, and cyberattacks are still ongoing. Even if damage occurs due to external influences such as cyberattacks or natural disasters, intelligent self-recovery must evolve from a cyber resilience perspective to minimize downtime of cyber assets (OS, WEB, WAS, DB). In this paper, we propose an intelligent self-recovery technology to ensure sustainable cyber resilience when cyber assets fail to function properly due to a cyberattack. The original and updated history of cyber assets is managed in real-time using timeslot design and snapshot backup technology. It is necessary to secure technology that can automatically detect damage situations in conjunction with a commercialized file integrity monitoring program and minimize downtime of cyber assets by analyzing the correlation of backup data to damaged files on an intelligent basis to self-recover to an optimal state. In the future, we plan to research a pilot system that applies the unique functions of self-recovery technology and an operating model that can learn and analyze self-recovery strategies appropriate for cyber assets in damaged states.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.121-129
• /
• 2023

In this study, we attempted to reduce CO₂ generated during manufacturing by replacing limestone (CaCO₃), a carbonate mineral used to produce cement clinker, with a decarbonated raw material to which CO₂ is not bound. The raw material for decarbonization was cement paste attached to waste concrete, among various industrial by-products. Waste concrete has cement paste adhered to the aggregate, which cannot be separated efficiently by general crushing and grinding methods. Peeling and grinding methods effectively remove only the cement paste without damaging the original aggregate. The abrasion time, steel ball type, and steel ball ratio were selected as effective factors for Abrasion. An optimal abrasion experiment was conducted to produce waste concrete fine powder containing decarbonated CaO as a cement clinker raw material through an experimental design method. The experiment revealed that the optimal conditions for producing waste concrete fine powder were an abrasion time of 7 minutes, a steel ball size for pulverization of 8 mm, and a steel ball ratio for pulverization of 0.6.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.182-199
• /
• 2023

Since 2021, government departments have been promoting Automated Driving Technology Development and Innovation Project as national research and development(R&D) project. The automated vehicles and service technologies developed as part of these projects are planned to be subsequently provided to the public at the selected Living Lab City. Therefore, it is important to determine a spatial area and operation section that enables safe and stable automated driving, depending on the purpose and characteristics of the target service. In this study, the static Operational Design Domain(ODD) elements for Level 4 automated driving services were reclassified by reviewing previously published papers and related literature surveys and investigating field data. Spatial analysis techniques were used to consider the reclassified ODD elements for level 4 in the real area of level 3 automated driving services because it is important to reflect the spatial factors affecting safety related to real automated driving technologies and services. Consequently, a total of six driving mode changes(disengagement) were derived through spatial information analysis techniques, and the factors affecting the safety of automated driving were crosswalk, traffic light, intersection, bicycle road, pocket lane, caution sign, and median strip. This spatial factor analysis method is expected to be useful for determining special areas for the automated driving service.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.6
• /
• pp.689-693
• /
• 2023

Domestic bridges with a service life of more than 30 years are expected to account for approximately 54% of all bridges within the next 10 years. As bridges rapidly deteriorate, it is necessary to establish an appropriate maintenance plan. Recent domestic and international research have focused on the integration of BIM to digitize bridge maintenance information and then enhance accessibility and usability of the information. Accordingly, this study developed a BIM-FEM interoperability algorithm for bridge decks to convert maintenance information into data and efficiently manage the history of maintenance. After creating an initial crack BIM based on an exterior damage map, bridge specification and damage information were linked to a numerical analysis that performs damage analysis considering damage scenarios and design loads. The spread of cracks obtained from the analysis results were updated into the BIM. Based on the damage spread information on the BIM, an automated technology was also developed to assess both the current and future condition ratings of the bridge deck. This approach can enable an efficient maintenance of the deck using the history data from bridge inspection and diagnosis as well as future information on cracks and defects. The expected early detection and prevention would ultimately improve the lifespan and safety of bridges.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.5
• /
• pp.936-944
• /
• 2023

The purpose of this study is to verify the effect of essence containing Coptis Japonica extract on skin barrier strengthening and moisturizing. The essence containing the Coptis Japonica extract was used by 22 subjects for four weeks, and the amount of percutaneous water loss (g/m²h) and water (A.U.) in the designated upper limit were measured. As a result of measuring percutaneous water loss using a vapometer, it was found to be 11.08±2.55 after 4 weeks of use from 14.82±4.01 before use, and the significance probability decreased significantly by 25.27% to p<0.001. The amount of skin moisture measured by the Corneometer was found to be 46.73±7.45 after use from 31.73±8.09 before use, and the significance probability increased by 47.26% to p<0.001, and the subject's subjective efficacy evaluation through a questionnaire showed that all subjects were 100% satisfied without skin adverse reactions. As a result of this, it has been confirmed that Coptis Japonica essence is effective in strengthening skin barriers and moisturizing, which is expected to be a cornerstone for the development of cosmetics using various activities of Coptis Japonica extract in the future.

• Animal Bioscience
• /
• v.36 no.12
• /
• pp.1831-1841
• /
• 2023

Objective: This study was realized to evaluate the effects of supplementation with blends of water and fat-soluble vitamins on animal performance and carcass traits of young Nellore bulls. Methods: Forty-three Nellore bulls, with an initial weight of 261±27.3 kg and a mean age of 8±1.0 months, were used. Five animals were slaughtered at the beginning of the experiment (reference group), to determine the initial empty body weight of the bulls that remained in the experiment. The remaining 38 bulls were fed ad libitum and distributed in a completely randomized design in a 2×2 factorial scheme, with or without supplementation of water-soluble (B-blend+ or B-blend-) and fat-soluble (ADE+ or ADE-) vitamin blends. Diets were isonitrogenous (120 g of crude protein/kg dry matter [DM] of total mixed ration) and consisted of a roughage:concentrate rate of 30:70 based on total DM of diet. The experiment lasted 170 days, with 30 days of adaptation and 140 days for data collection. At the beginning and end of the experimental period, the bulls were weighed to determine the average daily gain. To estimate the apparent digestibility of nutrients and microbial efficiency, spot collections of feces and urine were performed for five consecutive days. Results: DM, ashes, organic matter, crude protein, ethereal extract, neutral detergent fiber corrected for residual ash and residual nitrogenous, and N intake and apparent digestibility were not influenced by vitamin supplementation, but total digestible nutrients intake and non-fibrous carbohydrates digestibility were influenced by B complex vitamin supplementation. Nitrogen balance, microbial efficiency, and performance data were not influenced (p>0.05) by vitamin supplementation. Conclusion: Vitamin supplementation (a blend of water-soluble and fat-soluble vitamins or their combinations) does not influence the animal performance and carcass traits of young Nellore bulls.