• 대한안전경영과학회지
• /
• 제17권1호
• /
• pp.139-148
• /
• 2015

For design research of teenagers' posture correcting shirt, postures of teenagers were analyzed and became the base of inventing suitable patterns. The subjects of this study were 198 of both female and male middle school students from the city of Seoul. Students' postures in classroom and length change of body surface were observed and analyzed; based on this, total of 5 postures was selected, and length changes of body surface were applied. The patterns in this study were designed with stretch material to help antagonism by muscle movements. Each fabric that was used in this study had 110% of stretch, 120~140% of stretch, and 150~170% of stretch. Both of one-way-fabric and duplex-fabric were used in this study, depending on application site.

• 대한인간공학회지
• /
• 제3권1호
• /
• pp.19-24
• /
• 1984

As in dynamic muscular activity, to support one's body may be regarded as the static workload. An examination is made of the relationship between heart rate and oxygen uptake of three male graduate students in static working postures (sitting, squatting and standing). Though it has been believed that there exists a linear relationship between heart rate and oxygen uptake, this thesis shows that both have no relationship in the case of static postures, and that they may depend upon the characteristics of postures rather than the static workload. These results are discussed analytically. The additivity between static body postures and holding up one's hands at his maximum height is tested. Compared with the sum of energy expenditure in balancing one's body and holding up hands, the net rate of energy expenditure in performing them simultaneously is equivalent. In the case of static postures, the importance of the awareness of the characteristics and relevance of the measures is discussed.

• International journal of advanced smart convergence
• /
• 제7권3호
• /
• pp.110-118
• /
• 2018

This study aimed to examine the postures and behaviors of high school sophomores in Gyeongnam Province in daily life and the relations between back pain and sitting postures, and to identify undesirable behaviors and postures in daily life, and the following conclusions were obtained. The relation between back pain and cupping the chin in one of the two hands in rotation or sitting with the legs crossed or sitting on a chair with the back and hip not leaning against the backrest was statistically significant (p<0.05). The results above indicated that high school sophomores in South Korea spend most of the day sitting on a chair in school and that undesirable behaviors using one side of the body, such as cupping the chin in one of the two hands in rotation or sitting with the legs crossed, cause back pain. In addition, those who sit on a chair with the back and hip leaning against the backrest experienced less back pain than those who did not, and exercises after school were found to be helpful to prevent back pain.

• 한국학교보건학회지
• /
• 제12권2호
• /
• pp.321-337
• /
• 1999

The purpose of this study was to obtain basic data for the prevention and control of adolescent back pain through analyzing connections between study environments and physical posture. The subjects were 960 male general high school students in the Chonju area and the data were collected by a self-reported questionnaire from Mar. 17 to Mar. 22, 1999. The collected data were analyzed by a frequency, chi-square and t-test using an SPSS program. The results are as follows; 1) The experience rate of back pain perceived by subjects was 67.5% and by each grade: 1st-27.5%, 2nd-35.4%, 3rd-37.1%. The relationship between grades and the experience of back pain didn't show any significant difference. 2) The causes of back pain perceived by subjects such as 'postures are not good' was 56.7%, 'sitting too much time in a chair' was 39.1%, and 'too severe exercise' was 32.4%. 27.8% had back pain first during the 3rd grade of middle school, and 23.9% had it first during the 1st grade of high school. 3) Intensity of subjects' back pain spread from 'moderate' at 49.6%, to 'severe' at 16.4%. Concerning the frequency of back pain, 58.6% said it was 'irregalar'. 4) Among interventions to deal with back pain: 'move by exercising my back or ask friends to beat my back' was 41.0%, 'just bear it' was 23.1%, and at home 'don't have 'any treatment' was ranked first, at 54.9%. 5) The relationship between subjects' general characteristics and back pain experiences: height (t=-1.99, P=.046), sitting/height (t=-2.61, P=.009), self-perceived condition of health (${\chi}^2=23.530$, P=.000), family history (${\chi}^2=43.903$, P=.000) showed significant difference, but the kinds of transportation, sleeping postures, sleeping method and smoking didn't show significant differences. 6) The relationship between subjects' learning environment and back pain experiences, the height of students' desk and chair showed significant difference (${\chi}^2=23.054$, P=.000), but the sitting time didn't show significant difference. 7) The relationship between the characteristics of subjects' physical postures and back pain experiences: standing postures (${\chi}^2=15.105$, P=.001), and sitting postures (${\chi}^2=20.264$X2, P=.001) showed significant difference, but lifting postures didn't show significant difference.

• 대한인간공학회지
• /
• 제28권1호
• /
• pp.9-19
• /
• 2009

Repetitive movement, inadequate working posture, overuse of force, physical contact with sharp edge, vibration and temperature were well known risk factors of WMSDs (Work-related Musculoskeletal Disorders). Many researchers have investigated the relationship between inadequate working postures and incidences of WMSDs of the upper extremities, whereas relatively few researchers have tried to evaluate workload associated with the lower-body postures. The effects of lower-limb postures including various knee flexion angles on the subjective discomfort, heart rate and EMG of lower-limb muscles were investigated in this study. Thirty graduate students were asked to maintain thirteen different body postures, and heart rate and EMG data of five muscle groups (electro spine, biceps femoris, vastus medialis, gastrocnemius and tibialis anterior) from each posture were collected during fifteen minutes sustaining tasks. All participants were also asked to report their discomfort ratings of body parts. Results showed that high subjective discomfort ratings and heart rates were reported at the postures of knee angles of $60^{\circ}$ and $90^{\circ}$, whereas low discomfort ratings were founded at the postures of chair heights with 20cm, 40cm, and sitting with crossed legged. The change of median frequency for each muscle group during fifteen minutes tasks was investigated for each body posture to evaluate the relationship between muscle fatigue and body posture. It was found that the trends of changes of median frequency were different based on muscle group as well as lower-limb body posture from this study.

• 산업공학
• /
• 제10권3호
• /
• pp.197-208
• /
• 1997

In workplace design, an ergonomic solution should ensure low postural stress in the operator during his/her work. Stress caused by awkward working postures of the trunk, shoulders and legs can result in fatigue, discomfort, musculo-skeletal disorders and nerve entrapment syndromes. Since discomfort and musculo-skeletal disorders are both related to exposure to biomechanical load on the musculo-skeletal system, minimization of discomfort will contribute to reduction of the risk for musculo-skeletal disorders as well. Therefore, in this study, perceived discomfort on the human body joints was measured in the standing postures using the magnitude estimation in order to have a standardized numerical scale for joint discomfort. Nine healthy graduate students participated voluntarily in the laboratory study. The results revealed that perceived discomfort of all the joints increased as the joints deviated from neutral position. Especially, it showed drastic increment on perceived discomfort when deviation from neutral position in each human body joint increased from 75% to 100%. in terms of relative range of motion(R0M). On the basis of these experimental results, a preliminary ranking for assessment of stressfulness of non-neutral postures around the human body joints was suggested.

• 한국안전학회지
• /
• 제12권2호
• /
• pp.146-152
• /
• 1997

The number of accidents due to slipping, falling and awkward postures are estimated to account for over forty percent of annual industrial accidents in Korea. To prevent such accidents, stability-maintaining capabilities of workers should be understood before any other approach. This research was aimed to analyze capabilities of the workers with the help of yours male students maintaining standing postures on a tiltable stability platform. The experimental result showed that tilting direction, height of pivoting point, and permissible degree of swaying made significant effects on stability-maintaining duration. Besides, humans are more capable of maintaining their standing body postures on a platform tiltable fore and aft rather than or one tiltable sideways. The number of falling or tripping supported this phenomenon. A mechanical and physical discussion on the stability was added.

• The Journal of Korean Physical Therapy
• /
• 제11권2호
• /
• pp.1-4
• /
• 1999

The purpose of this study was to analyze the changes of the muscle strength and length according to the changes of evaluation postures. Subjects of this study were 13 male and 13 female students. 6 evaluation postures were selected for this study(K90H90, K90H45, K90H0, K70H90, K70H45, K70H0 ; K90=knee $90^{\circ}$ flexion, K70=knee $70^{\circ}$ flexion, H90=hip $90^{\circ}$ fleion, H45=hip $45\circ}$ flexion. H0=hip $0^{\circ}$ ). The peak torque and hamstring muscle length(from fibula head to ischial tuberosity) were measured at each postures. The peak torque level was evaluated by make use of the KIN-COM. The results were as follows : 1. The peak torque in male was significantly increased with changes of hip flexion angle but not in female(($90^{\circ}\;>\;45^{\circ}\;>0^{\circ}$). 2. The hamstring length and peat torque in male and female was significantly changed according to the alteration of evaluation postures.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.111-119
• /
• 2016

This study aimed to analyze postures that were frequently conducted in manufacturing industry. To find grip strength and muscle activities of each posture, Maximum Voluntary Contraction (MVC) and ElectroMyoGraphy (EMG) were measured. Based on the results of this study, the most appropriate posture could be suggested and used as a basic information for preventing musculoskeletal disorders. Most work-related musculoskeletal disorders have been occurred in the fields of manufacturing industry. According to previous studies, it was reported that the rate of musculoskeletal diseases of upper extremity was higher than that of other body parts. Accordingly, there were many studies about discomfort and grip strength of upper extremity. However, these studies dealt with single selection of wrist, elbow and shoulder. So, it was insufficient for comprehensive studies about upper extremity. And in order to improve the work posture, the physiological changes being generated by the combination of wrist, elbow and shoulder postures should be observed and analyzed. In order to conduct this study, thirty university students who had no records of MSDs involved were recruited. Independent variables were postures of wrist(pronation, neutral, supination), postures of elbow(flexion $45^{\circ}$, $90^{\circ}$) and postures of shoulder(flexion $0^{\circ}$, $90^{\circ}$). And dependent variables were MVC values and EMG values. Jamar dynamometer and TeleMyo 2400T G2 was used to measure MVC and EMG. MVC and EMG for 12 postures were measured for three second and for three times. Experiment was performed randomly. A 10 minutes rest period was provided after each t. To measure muscle load, the EMG signals of eight muscles (Biceps, Medial triceps, Lateral triceps, Brachioradialis, Extensor carpi ulnaris, Extensor carpi radialis, Flexor carpi ulnaris and Flexor carpi radialis) were evaluated. MVC values and EMG values were analyzed using Minitab ver. 14. The results showed that MVC value was the highest at shoulder $0^{\circ}$, elbow $45^{\circ}$ and wrist supination. In case of wrist postures, MVC of supination is the highest. In case of elbow and shoulder postures, MVC of flexion $45^{\circ}$ and $0^{\circ}$ was the highest. It was found that there were interaction between wrist and elbow posture under shoulder flexion and between shoulder and wrist under elbow flexion $45^{\circ}$. In case of the angle of shoulder $0^{\circ}$, elbow $45^{\circ}$ and wrist supination, the EMG values of four muscles(Medial Triceps, Extensor carpi ulnaris, Extensor carpi radialis, Flexor carpi ulnaris) were the highest. Based on this study, it is worth to note that the combination postures of upper extremity have a large impact on the MVC and EMG. The optimal condition upper extremity was shoulder flexion $0^{\circ}$, elbow flexion $45^{\circ}$ and wrist supination for preventing work-related musculoskeletal disease.

• 대한산업공학회지
• /
• 제27권4호
• /
• pp.413-423
• /
• 2001

Low back disorders (LBDs) are one of the most common and costly work-related musculoskeletal disorders. One of the major possible risk factors of LBDs is to work with static and awkward trunk postures, especially in a complex trunk posture involving flexion, twisting and lateral bending simultaneously. This study is to examine the effect of complex trunk postures on the postural stresses using a psychophysical method. Twelve healthy male students participated in an experiment, in which 29 different trunk postures were evaluated using the magnitude estimation method. The results showed that subjective discomfort significantly increased as the levels of trunk flexion, lateral bending and rotation increased. Significant interaction effects were found between rotation and lateral bending or flexion when the severe lateral bending or rotation were assumed, indicating that simultaneous occurrence of trunk flexion, lateral bending and rotation increases discomfort ratings synergistically. A postural workload evaluation scheme of trunk postures was proposed based on the angular deviation levels from the neutral position. Each trunk posture was assigned numerical stress index depending upon its discomfort rating, which was defined as the ratio of discomfort of a posture to that of its neutral posture. Four qualitative action categories for the stress index were also provided in order to enable practitioners to apply corrective actions appropriately. The proposed scheme is expected to be applied to several field areas for evaluating trunk postural stresses.