• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.753-760
• /
• 2003

An existing studies concern about movement of pile bridge abutments. However, lateral displacement cause the serious failure of bridge by embankment under soft soil lateral flow A intention is obtained by analyzing the relationship between the safety factor of evaluation for lateral movements. Precise investigation and analysis are performed, in which the lateral movement of bridge abutments has occurred, and construct design strut-slab between bridge abutments in order to restraint lateral flow. As a result of this study, it was found that when evaluation for lateral movements is allowed to use Tschebotarioff's method and lateral flow decision number (I) and revision lateral flow decision number (M$_{I}$) by Korea Highway Corporation. Most important thing is decision of pressure of lateral flow at this case. Tschebotarioff's isoscales triangle method have no trouble analysis of pressure of lateral flow. Strut-slab method are nearly not have constructed case in this field site study that applied method. The method are between abutments combined steel strut and reinforced concrete slab. This method are effective restraint lateral flow but have little difficulty if long span bridge between abutments.s.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.564-571
• /
• 1998

The function of diaphragms at abutments and piers of prestressed concrete (PSC) box girder train bridge is to transfer forces from the superstructure onto bearings or column and to stiffen the superstructure cross-section against in-plane deformation. Due to large stress disturbance at diaphragm, the design for the diaphragm using conventional design method is relatively irrational than designs for other structual members. And, due to contribution to boundary condition of deck slab by the diaphragm, the behavior of deck slab near the diaphragm is different from behavior of the deck slab obtained from two dimensional analysis of the bridge, which is basis far the design of deck slab. In this paper, three dimensional behavior of deck slab near diaphragm of PSC box girder train bridge constructed by the precast span method are analyzed by using three dimensional finite element modeling. Then, strut-and-tie model is applied to design the diaphragm of PSC box girder train bridge. The modeling techniques in this paper can be applied effectively to examine the causes of cracks at deck slab near diaphragm and to design diaphragm rationally.

• 한국철도학회논문집
• /
• 제1권1호
• /
• pp.30-39
• /
• 1998

The functions of diaphragms at abutments and piers of PSC box girder railway bridge are to transfer forces from the superstructure onto bearings or columns and to stiffen the superstructure cross-section against in -plane deformation. Due to stress disturbance at diaphragm, the design for the diaphragm using conventional design method is relatively irrational than those for other structural members. And, due to contribution to boundary condition of deck slab by the diaphragm, the behavior of deck slab near the diaphragm is different from that of the deck slab obtained from two dimensional analysis of the bridge, which is basis for the design of deck slab. In this paper, three dimensional behavior of deck slab near the diaphragm of prestressed concrete (PSC) box girder railway bridge constructed by the precast span method are analyzed by using three dimensional finite element modeling and using the strut-and-tie model design of the diaphragm are presented. The modeling techniques used in this paper can be applied effectively to examine the causes of cracks at deck slab near diaphragm and to design diaphragm rationally.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.265-268
• /
• 2008

슬래브-기둥 접합부는 많은 구조물의 시공에 사용되고 있다. 그러나 횡하중을 받는 슬래브-기둥 접합부의 파괴거동 및 극한강도를 예측하는 것이 매우 어렵기 때문에 현행 구조물 설계기준은 횡하중을 받는 슬래브-기둥 접합부의 파괴 거동을 명확하게 설명하지 못하고 있다. 본 논문에서는 횡하중을 받는 슬래브-기둥 접합부의 극한해석과 설계를 위하여 응력교란영역을 가지는 3차원 구조의 해석과 설계를 위하여 제안된 3차원 격자 스트럿-타이 모델 방법을 파괴실험이 수행된 43개의 횡하중을 받는 슬래브-기둥 접합부의 극한강도 평가에 적용하고, ACI 318-05 기준과 FIB 1999 기준에 의한 극한강도 평가결과와 비교함으로써 3차원 격자 스트럿-타이 모델 방법의 타당성을 검토하였다.

• 대한토목학회논문집
• /
• 제34권2호
• /
• pp.437-446
• /
• 2014

현 논문에서는 전편 논문에서 제안한 3차원 격자요소를 활용하는 스트럿-타이 모델 방법의 타당성 및 효율성을 검증하기 위해 파괴실험이 수행된 13개의 슬래브-기둥 접합부 및 51개의 비틀림 보 등의 극한강도를 평가하였으며, 또한 3축 방향의 하중을 받는 교각코핑부에 대한 설계를 수행하였다. 현 연구의 방법에 의한 철근콘크리트 슬래브-기둥 접합부 및 비틀림 보의 극한강도 평가결과는 실험결과, ACI 318 설계기준을 비롯한 세계 주요설계기준, 그리고 몇몇 연구자의 방법에 의한 평가결과 등과 비교하여 현 연구방법의 타당성을 검증하였다. 교각코핑부의 설계결과는 ACI 318 설계기준의 단면법 및 AASHTO-LRFD의 스트럿-타이 모델 설계기준에 의한 설계결과와 비교하여 그 결과의 타당성을 검토하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권6호
• /
• pp.205-213
• /
• 2008

FRP 스트럿을 가진 PSC 박스거더 교량 구조는 기존의 PSC 박스거더를 효율적으로 변형시켜 넓어진 상부 슬래브의 캔틸레버 부분을 스트럿으로 지지하는 구조형식으로, 상부구조의 자중을 줄여 하부구조의 크기를 경감시키므로 경제적이고 미관이 뛰어난 교량 건설을 가능하게 한다. 본 연구에서는 국내에서 처음 시도되는 FRP 스트럿을 가진 PSC 박스거더의 실물모형 재하실험과 유한요소해석을 수행하여 상호 결과를 비교함으로써 FRP 스트럿을 가진 PSC 박스거더 교량 구조에서 FRP 스트럿과 스트럿 적용에 따른 상부 슬래브의 구조적 안전성에 대하여 평가하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.267-270
• /
• 2005

The section of double-tee is considered as one of the most efficient type for flexure. However, the depth of it is bigger then that of other slab systems. The story height of it is also increased because the duct space is required under the double tee in addition to their net depth. Thus, a new modified double-tees with the nib length of 1.58m was suggested in this study. The story height of this one is reduced up to 450mm by including duct space under the nib at the ends of slab. The four ends of the modified two single tees were designed by strut-tie models. Shear tests were performed on them to verify the safety. The ultimate shear strengths of non-prestressed two specimens were larger than the design shear strength by strut-tie models. They were failed in ductile with many distributed flexural crackings. However, the other prestressed two specimens showed much stiffer behaviors, less deflection. and strength than those of prestressed.

• Structural Engineering and Mechanics
• /
• 제48권2호
• /
• pp.221-239
• /
• 2013

This paper focuses on a development of strut-and-tie model (STM) to predict the capacity of an improved longitudinal joint for decked bulb-tee bridge systems. Nine reinforced concrete beam/slab specimens anchored by spliced headed bars with different details were tested. Test results were evaluated and compared with an anticipation of the validated STM. The proposed STM provides a lower bound of the ultimate capacity of the joint zone. It shows that the lap length of headed bars has a significant effect on structural behaviors of the improved joint. To develop a full strength joint, the range of the lap length can be determined by the strength and compatibility requirement. Design recommendations to spliced headed bars, concrete strength, as well as lacer bars in the joint zone are proposed for developing a full strength joint.

• Steel and Composite Structures
• /
• 제44권5호
• /
• pp.677-684
• /
• 2022

This paper reports experimental investigation on shear behavior of steel reinforced concrete (SRC) shallow floor beam, where the steel shape is embedded in concrete and the high strength bolts are used to transfer the shear force along the interface between the steel shape and concrete. Six specimens were conducted aiming to provide information on shear performance and explore the shear bearing capacity of SRC shallow floor beams. The effects of the height of concrete slab, the size and the type of the steel section on shear performance of beams were also analyzed in the test. Based on the strut-and-tie model, the shear strength of the SRC shallow floor beam was proposed. Experimental results showed that composite shallow floor beam exhibited satisfactory composite behavior and all of the specimen failed in shear failure. The shear bearing capacity increased with the increasing of height of concrete slab and the size of steel shape, and the bearing capacities of beam specimens with castellated steel shape was slightly lower than those of specimens with H-shaped steel section. Furthermore, the calculations for evaluating the shear bearing capacity of SRC shallow floor beam were verified to be reasonable.

• Steel and Composite Structures
• /
• 제25권5호
• /
• pp.523-534
• /
• 2017

Cable-supported ribbed beam composite slab structure (CBS) is proposed in this study. As a new cable-supported structure, it has many merits such as long span availability and cost-saving. Inspired by the previous research on cable-supported structures, the fabrication and construction process are developed. Pre-stress design method based on static equilibrium analysis is presented. In the algorithm, the iteration convergence can be accelerated and the calculation result can be kept in an acceptable precision by setting a rational threshold value. The accuracy of this method is also verified by experimental study on a 1:5 scaled model. Further, important parameters affecting the mechanical features of the CBS are discussed. The results indicate that the increases of sag-span ratio, depth of the ribbed beam and cable diameter can improve the mechanical behavior of the CBS by some extent, but the influence of strut sections on mechanical behavior of the CBS is negligible.