• Journal of the Korea Society for Simulation
• /
• v.25 no.1
• /
• pp.1-9
• /
• 2016

This study focuses on the air to air missile control fin planform optimization for the minimizing hinge moment with the considering phenomena of fluid and structure simultaneously. The fluid-structure interaction method is applied for the fluid and structure phenomena simulation of the control fins. A transient-loosely coupled method is used for the fluid-structure interaction simulation because it is suited for using each fluid and structure dedicated simulation software. Searching global optimization point is required many re-calculation therefore in this study, a mathematical model is applied for rapidly calculation. The face centered central composite method is used for generating design points and the 2nd polynomial response surface is sued for generating mathematical model. Global optimization is performed by using the generic algorithm. An objective function is the minimizing travel distance of the center of pressure between Mach 0.7 and 2.0 condition. Finally, the objective function of optimized planform is reduced 7.5% than the baseline planform with satisfying constrained conditions.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.1577-1580
• /
• 1987

This paper proposes a gate and functional level logic simulator which can be run on XENIX O.S. The simulator has hierarchical structure including Hardware Description Language compiler, Waveform Description Language compiler, and Simulation Command Language compiler. The Hardware Description Language compiler generates data structure composed of gate structure, wire structure, condition structure, and event structure. Simulation algorithm is composed of selective trace and event-driven methods. To improve simulation speed, Cross Referenced Linked List Structure ia defined in building the data structure of circuits.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.3
• /
• pp.1-9
• /
• 2014

The aim of this study is to develop a simulation model for analyzing 2D truss structure using Generic Agricultural System Simulator (GASS). Although the truss is simple structure, numerical methods based on matrix analysis are cumbersome and complicated. This study suggests simple and convenient methods to remove calculating steps for whole stiffness matrices. The simulation environment based on independency of object-oriented components on GASS consists of component development and component deploy stages. A component for a truss structure is implemented based on equilibrium equations at nodes. The simulator can analyze truss structures through deploying components with attributes and links. The examples using GASS show intuitive graphical results of the movements of truss nodes.

• Journal of Institute of Convergence Technology
• /
• v.2 no.2
• /
• pp.20-24
• /
• 2012

In this paper, we perform a ANSYS simulation of assembly structure composed of three parts, bolt, nut, and coil spring, under the loading of a screw torque 640~800 ($N{\cdot}m$) derived from the given bolt tensile strength 10.9, which allows us to investigate a lock-nut mechanism for the prevention of bolt-loosening after three parts are fastened. And also we investigate the safety factor of each component with effective stress distribution obtained from the simulation, which enables us to estimate the structural safety of a new lock-nut structure. Both simulation and investigation shown in this paper will contribute to the development of a new lock nut structure.

• Journal of the Korea Society for Simulation
• /
• v.11 no.2
• /
• pp.55-66
• /
• 2002

VHDL has been. widely used in modeling and simulation of hardware designs. However, complex relationship between components of the designs makes the VHDL modeling problem very difficult. Furthermore, after the initial creation of VHDL models, they evolve into many versions over their lifetime. To cope with such difficulties, this paper proposes a new methodology for the management of VHDL models supporting versions. Its conceptual bases are system entity structure and relational database. Within the methodology, a family of hierarchical structures of a design is organized in the form of VHDL model structure. It is, in turn, represented in the form of relational tables. Once the model structure is built in such a way, a specific simulation model which meets design objective is pruned from the model structure. The details of VHDL codes are systematically synthesized by combining it with the primitive models in a model base. These algorithms are also defined in terms of relational algebraic operations.

• Nuclear Engineering and Technology
• /
• v.41 no.8
• /
• pp.1109-1114
• /
• 2009

The evolution of a high burnup structure (HBS) in a light water reactor (LWR) $UO_2$ fuel was simulated using the Potts model. A simulation system for the Potts model was defined as a two-dimensional triangular lattice, for which the stored energy was calculated from both the irradiation damage of the $UO_2$ matrix and the formation of a grain boundary in the newly recrystallized small HBS grains. In the simulation, the evolution probability of the HBS is calculated by the system energy difference between before and after the Monte Carlo simulation step. The simulated local threshold burnup for the HBS formation was 62 MWd/kgU, consistent with the observed threshold burnup range of 60-80 MWd/kgU. The simulation revealed that the HBS was heterogeneously nucleated on the intergranular bubbles in the proximity of the threshold burnup and then additionally on the intragranular bubbles for a burnup above 86 MWd/kgU. In addition, the simulation carried out under a condition of no bubbles indicated that the bubbles played an important role in lowering the threshold burnup for the HBS formation, thereby enabling the HBS to be observed in the burnup range of conventional high burnup fuels.

• Asia Marketing Journal
• /
• v.14 no.4
• /
• pp.77-94
• /
• 2013

Really new products (RNPs) provide novel benefits yet many consumers are reluctant to accept these highly innovative new products. Previous literature has shown that mental simulation is an effective method for enhancing the evaluation of RNPs. However, Castano et al. (2008) and Zhao, Hoeffler, and Zauberman (2011) demonstrate conflicting results as to which type of mental simulation (i.e., process versus outcome) is more effective for the enhancement of RNP evaluation. The authors try to reconcile these results by incorporating a moderating variable which is personal need for structure (PNS). PNS is an individual difference variable that taps the differences in people's propensity to cognitively structure and simplify their environment (Neuberg and Newsom 1993). From the analysis of the previous two works, the authors point out that consumers' susceptibility to uncertainty may contribute to the different results, and suggest that this susceptibility is dependent on consumers' PNS. To test the hypotheses established, an experiment was conducted. Waterless washing machine was presented as a RNP and PNS was measured by using the 12-item PNS Scale (Thompson et al. 2001). The results of the study show that for high-PNS consumers, process simulation is more effective than outcome simulation for enhancing the evaluation of a RNP, whereas for low-PNS consumers, outcome simulation is more effective than process simulation. This research contributes to the mental simulation and new product literature by suggesting and verifying that PNS moderates the effects of process versus outcome simulations for enhancing the evaluation of RNPs. This research provides important managerial implications for marketing managers of RNPs, indicating that they should take account of the target consumers' PNS in planning marketing communications. Specifically, when targeting high-PNS consumers, marketing communications that encourage process simulation may be more effective than those that encourage outcome simulation. In contrast, when targeting low-PNS consumers, marketing communications that encourage outcome simulation may be more effective than those that encourage process simulation.

• Journal of the Korea Society for Simulation
• /
• v.3 no.2
• /
• pp.69-76
• /
• 1994

Traditionally, simulation-based learning games which are known as flight-simulators have been constructed as a black-box game. Within a black-box game, game-players can view and modify only a part of model parameters. Game-players cannot change the structure of a simulation model. In a black-box game, game-players cannot understand and learn the system structure which is responsible for the system behavior. In this paper, the multi-tasking at the level of operating systems is exploited to enhance the transparency of simulation-based learning game. The white-box game or transparent-box game allows game-players ot view and modify the model structure. The multi-tasking solution for white-box learning game is implemented with Smalltalk language on MS-/windows operating system.

• Journal of the Korea Society for Simulation
• /
• v.8 no.4
• /
• pp.109-124
• /
• 1999

The major objective of this research is to design and build the variable structure DEVS modeling & simulation framework. To do this, we have proposed the direct message passing mechanism between the model and its simulator to deal with the structural demand from the model during the simulation. In this approach, four types of basic messages are introduced for the vertical(creation/deletion of the child) and horizontal(creation/deletion of the brother) structural changes. Proposed methodology has been successfully applied to the multi-processor system and the forest fire information system.

• Computers and Concrete
• /
• v.9 no.4
• /
• pp.245-255
• /
• 2012

The damping effect of a Concrete-filled Rectangular Steel Tube (CRST) frame structure is studied in this paper. Viscous dampers are employed to insure the function of the building especially subjected to earthquakes, for some of the main vertical elements of the building are not continuous. The shaking table test of a 1:15 scale model was conducted under different earthquake excitations to recognize the seismic behavior of this building. And the vibration damping effect was also investigated by the shaking table test and the simulation analysis. The nonlinear time-history analysis of the shaking table test model was carried out by the finite element analysis program CANNY. The simulation model was constructed in accordance with the tested one and was analyzed under the same loading condition and the simulation effect was then validated by the tested results. Further more, the simulation analysis of the prototype structure was carried out by the same procedure. Both the simulated and tested results indicate that there are no obvious weak stories on the damping equipped structure, and the dampers can provide the probability of an irregular CRST frame structure to meet the requirements of the design code on energy dissipation and deformation limitation.