• Korean Journal of Environment and Ecology
• /
• v.31 no.1
• /
• pp.93-103
• /
• 2017

The purpose of this study is to assess the recovery rate of vegetation structure after restoration works at the damaged Nogodan area in Jirisan National Park. Fourteen monitoring plots were set up at restoring work area and twelve control plots were set up at natural forest near monitoring plots. Flora, Relative Importance Percentage and Similarity Index were analyzed. Mean Similarity Index between monitering plot and control plot near helliport area showed thirty five point two percent and height of shrub layer recovered up to twenty percent, approxomately durindg twenty three years after experimental restoration works. Mean Similarity Index between monitering plot and control plot around Nogodan peak area showed seventeen point six percent but height of shrub layer recovered up to twenty percent, approxomately during ninteen years after restoration works. Mean similarity index between monitering plot and control plot on transfered millitary area showed thirty four point three percent but coverage of shrub layer showed twenty percent,approxomately during seven years after restoration works. Long term monitering shall be necessary for developing assessment criteria of ecologial restoration and ecological restoration technology.

• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.63-76
• /
• 2021

The purpose of this study is to scientifically analyze physicochemical characteristics of the roof tiles used for palaces in the Joseon Dynasty which stored in Changdeokgung material storage and Seooreung Jaesil and the modern handmade ones which made by N company to understand the differences between their manufacturing techniques. Through chromaticity, cross-sectional observation, component analysis, and crystal structure analysis, it was possible to confirm the physicochemical properties and fired properties of the roof tile. Roof tiles from the Joseon Dynasty have a wider colorimetric range and higher apparent porosity and water absorption, on average, than the modern roof tiles. The cross section of the Joseon Dynasty roof tiles shows that most clay minerals have not been vitrified, remaining in the form of atypical particles, while the modern roof tiles have denser clay materials. X-ray diffraction analysis identified low-temperature minerals such as micas in Joseon roof tiles but no peak of these minerals was observed in the modern roof tiles, implying that the modern ones are fired at higher temperature than the Joseon ones. Therefore, the modern roof tiles are fired at higher temperature and have higher density than the Joseon ones due to the use of pugmills. The general content of main ingredients was similar between the two. Additionally, the principal component analysis of trace elements in the Joseon roof tiles showed that most samples were from similar areas. It seems that the Joseon roof tiles were manufactured using soils supplied from a specific region at the same timeframe and their consistency in the content of principal components implies that they also have similar mix proportions of clay.

• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.217-225
• /
• 2019

The chimi(ridge-end tile) of Wangheungsa temple is the oldest in our country. The upper part of the chimi was excavated from the southern side of Wangheungsa temple and the lower part from the northern side. These parts are considered to be portions of the same chimi, because they are similar in shape and are excavated from two sides of the same temple structure. However, the original shape of the chimi cannot be determined owing to substantial deterioration. Hence, in this study, replicas of the deteriorated chimi portions of Wangheungsa temple were fabricated by employing 3D scanning technology and the computer numerical control machining method. While observing the bending phenomenon of the chimi, the proposed model was warped realistically on the basis of the bending direction of the actual chimi. Consequently, the restoration process was modified several times. The results indicated that no gaps can be found between the upper and lower parts, and the corresponding patterns connect naturally. Furthermore, the proposed method is contactless, safe, operable, reproducible, and appropriate for restoration of artifacts. Additionally, the modeling data is semi-permanent. Hence, if modelling data is appropriately applied as per the characteristics of artifacts, it can be utilized in various fields such as virtual exhibitions, hands-on exhibitions, cultural heritage restoration, and production of teaching aids and souvenirs.

• Proceedings of the Korea Society of Environmental Biology Conference
• /
• 2003.06a
• /
• pp.1-5
• /
• 2003

In order to prepare a basis for ecological restoration of the Seoul Metropolitan area, ecological diagnoses on soil physico-chemical properties and vegetation structure were carried out. Land use patterns, actual vegetation, and biotope patterns were also investigated based on aerial photograph interpretation and field checks. I formulated landscape elements overlaying those data and evaluated the ecological value of each element. Soil pollution was evaluated by analyzing soil samples collected in each grid on the mesh map, divided by 2km $\times$ 2km intervals. Soil samples were collected in forests or grasslands escaped from direct human interference. Soil pollution evaluated from pH, and SO$_4$, Ca, Mg, and Al contents of soil was more severe in the urban outskirts than in the urban center. Those soil environmental factors showed significant correlation with each other. Vegetation in the urban area was different in species composition from that in suburban areas and showed lower diversity compared with that in the suburban areas. Successional process investigated by population structure of major species also showed a difference. That is, successional trend was normal in suburban areas, but that in urban areas showed a retrogressive pattern. The landscape ecological map of Seoul indicates that the urban center lacks vegetation and greenery space is restricted in urban outskirts. Such an uneven distribution of vegetation has caused a specific urban climate and thereby contributed to aggravation of air and soil pollution, furthermore causing vegetation decline. From this result, it was estimated that such uneven distribution of vegetation functioned as a trigger factor to deteriorate the urban environment. I suggested, therefore, a restoration plan based on landscape ecological principles, which emphasizes connectivity and even distribution of green areas throughout the whole area of the Seoul to solve this complex environmental problem. In this restoration plan, first of all, I decided the priority order for connection of the fragmented greenery spaces based on the distances from the core reserves comprised of green belt and rivers, which play roles as habitats of wildlife as well as for improvement of urban environment. Next, I prepared methods to restore each landscape element included in the paths of green network to be constructed in the future on the bases of such preferential order. Rivers and roads, which hold good connectivity, were chosen as elements to play important roles in constructing green network by linking the fragmented greenery spaces.

• The Journal of the Korea Contents Association
• /
• v.20 no.7
• /
• pp.56-65
• /
• 2020

The purpose of this research is to study the excellence and originality of the Joseon artillery(Jungwan-gu) through an effective restoration. Jungwan-gu that was used during the Japanese Invasion of Korea in 1592 was able to maintain its maritime dominance based on cutting-edge technology of its time. Joeson artillery(Jungwan-gu) was used in major naval/land battles during the Japanese Invasion of Korea in 1592 and is an important cultural heritage that provides a glimpse into Joeson people's will to defend the nation from foreign invasion. For further historical verification such as operational method of Jungwan-gu, extensive research in various fields including size, proportions, structure, materials, and casting method were required. Accordingly, for a more effective research on Jungwan-gu, cutting-edge technologies such as 3D scanning and 3D printing were utilized. Firstly, 3D scanning, modeling, and printing technology were applied to identify the morphological characteristics of Jungwan-gu. Through this, we were able to reach our research objective of identifying the size, internal structure, and proportionality of Jungwan-gu. In addition, by studying the form, operation, casting methods, and other characteristics, the restoration of Jungwan-gu provided us with an important opportunity to verify the dominance and originality of the Joeson era's science and technology during the Japanese Invasion of 1592. This reaserch subject participated in the "4th 3D printing BIZCON Contest" and won the Minister Prize of Science and Technology Information and Communication.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.34 no.1 s.114
• /
• pp.92-106
• /
• 2006

The process of designing Cheonggyecheon Entrance Plaza began with researching four keywords: plaza, restoration. modernity and icon. The outcome of the research was reinterpreted into and informed the design. An urban plaza must not only be a stage for civic life but should also be a portrait of the city to which it belongs. Many Korean plazas, however, are treated as if they are parks. Yeouido Park, which was originally a vast urban void, and Seoul Plaza, recently paved with grass, are good example. The strong 'green myth' can hinder socio-political activities. Cheonggyecheon cannot be said to have been 'restored', since it is still disconnected from its origin and upper streams, and the water is circulated by electricity. So it is better understood as an artificial urban waterfront, rather than an ecologically restored stream. This fact might diminish its ecological value, but not its recreational one. The entrance plaza therefore should reflect that the new stream brings back an 'experience', not only water itself. At the same time, the catch phrase of this restoration project was 'post-modern'. The demolished Cheonggye Expressway represents the 'economy drive' of the 1970s, so the newly opened Cheonggyecheon serves as a perfect counterpart to it. But modernity in Korea is the spirit that made many of the good things, not only its shortcomings, we have now. And from the philosophy of this restoration project, we can see that it is still an ongoing attitude in a way. Remnant of Cheonggye Expressway can evoke our nostalgia for the era. There are plenty of symbols in Seoul, both as architecture and objects. But none of them provide citizens with experience, other than the experience of looking at them. Cheonggyecheon Entrance Plaza is a good place to serve as an icon for a dynamic Seoul. From the research, the designer concluded that this plaza should commemorate the incomparable horizontal experience of Cheonggyecheon and the old expressway, amid the vertical metropolis. The Pedestrian Sculpture, which people can stroll on and look out over Cheonggyecheon, is to be made of steel cladding with a core structure and represents the dynamism of the stream, Seoul and contemporary Korea. The choice of material and the steel structure are also ways of creating the icon. The Water Plaza, the space underneath the ramp, will accommodate people and their urban activities, providing an opportunity to play with water. The Waterblades will be a device for the dramatic beginning of the stream, simultaneously camouflaging ugly openings in the outlets. The Wall of Archaeology is to be made with pre-fab resin blocks, translucent enough so that people can see through any archaeological findings of the site. The strong water-resistant character of resin makes the wall steady throughout the flood season as well. Cheonggyecheon restoration project is an effort to combine contemporary urban demand with the once-existing physicality by evoking our nostalgia for it. The project itself shows many socio-political issues of present-day Korea. The entrance plaza design thus is focused on suggesting an icon for the metropolis, simultaneously celebrating the stream itself. Within this space, people will be exposed to a unique experience that any 'green myth' cannot offer.

• Proceedings of the KACD Conference
• /
• 2008.05a
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel. undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesio-distally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference on fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even of that portion consists of mainly enamel and a little dentin structure.

• Restorative Dentistry and Endodontics
• /
• v.33 no.3
• /
• pp.177-183
• /
• 2008

It was reported that esthetic composite resin restoration reinforces the strength of remaining tooth structure with preserving the natural tooth structure. However, it is unknown how much the strength would be recovered. The purpose of this study was to compare the fracture resistance of three types of undermined cavity filled with composite resin with that of non-cavitated natural tooth. Forty sound upper molars were allocated randomly into four groups of 10 teeth. After flattening occlusal enamel, undermined cavities were prepared in thirty teeth to make three types of specimens with various thickness of occlusal structure (Group $1{\sim}3$). All the cavity have the 5 mm width mesiodistally and 7 mm depth bucco-lingually. Another natural 10 teeth (Group 4) were used as a control group. Teeth in group 1 have remaining occlusal structure about 1 mm thickness, which was composed of mainly enamel and small amount of dentin. In Group 2, remained thickness was about 1.5 mm, including 0.5 mm thickness dentin. In Group 3, thickness was about 2.0 mm, including 1 mm thickness dentin. Every effort was made to keep the remaining dentin thickness about 0.5 mm from the pulp space in cavitated groups. All the thickness was evaluated with radiographic Length Analyzer program. After acid etching with 37% phosphoric acid, one-bottle adhesive (Single $Bond^{TM}$, 3M/ESPE, USA) was applied following the manufacturer's recommendation and cavities were incrementally filled with hybrid composite resin (Filtek $Z-250^{TM}$, 3M/ESPE, USA). Teeth were stored in distilled water for one day at room temperature, after then, they were finished and polished with Sof-Lex system. All specimens were embedded in acrylic resin and static load was applied to the specimens with a 3 mm diameter stainless steel rod in an Universal testing machine and cross-head speed was 1 mm/min. Maximum load in case of fracture was recorded for each specimen. The data were statistically analyzed using one-way analysis of variance (ANOVA) and a Tukey test at the 95% confidence level. The results were as follows: 1. Fracture resistance of the undermined cavity filled with composite resin was about 75% of the natural tooth. 2. No significant difference in fracture loads of composite resin restoration was found among the three types of cavitated groups. Within the limits of this study, it can be concluded the fracture resistance of the undermined cavity filled with composite resin was lower than that of natural teeth, however remaining tooth structure may be supported and saved by the reinforcement with adhesive restoration, even if that portion consists of mainly enamel and a little dentin structure.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.8
• /
• pp.1238-1246
• /
• 1989

In this paper, a texture synthesis technique based on the NCAR(non-causal auto-regressive) model and the pyramid structure is proposed. In order to estimate the NCAR model parameters accurately from a noisy texture, the MAP(maximum a posteriori) estimation technique is also employed. In our approach, since the input texture is decomposed into the Laplacian oyramid planes first and then the NCAR model is applied to each plane, we are able to obtain a good synthesized texture even if the texture exhibits some non-random local structure or non-homogenity. The usrfulness of the proposed method is demonstrated with seveal real textures in the Brodatz album. Finally, the 2-dimensional MAP estimation technique can be used to the image restoration for noisy images as well as a texture image synthesis.

• Explosives and Blasting
• /
• v.40 no.2
• /
• pp.15-24
• /
• 2022

Recently, the demand of demolition for the unnecessary industrial structure is increasing due to deterioration tendency and the issue of demolition is becoming a major highlight. The restoration of the dismantled industrial site to its original natural state was currently underway. This execution case was intented to describe an application of the felling method one of the explosive demolition method to the demolition of the industrial stack. This stack was 150m high, a composite structure in which the outer wall of the stack was a reinforced concrete shell structure and internal stovepipe was a steel shell structure. As as result of the explosive demolition, the stack had collapsed precisely according to estimated direction. And the explosive demolition was completed without causing any damage to surrounding facilities.