• Composites Research
• /
• v.16 no.4
• /
• pp.29-35
• /
• 2003

In this paper. various tow parameters such as equivalent tow thickness, amplitude of longitudinal tow and tow intervals were investigated and compared with each other by using microscopic observation to find out the exact deformation patterns between both directions of the fabric structure(Longitudinal and Transverse Directions). And those observation results were compared with bias extension. biaxial tests results with dry fabric which has the same tow structure as the draped helmet materials and also compared with prepreg specimen which is cured by autoclave moulding without vacuum and pressure condition. Specimens for the observation were taken from draped helmet which is made of fabric composite(Five Harness Satin Weave). From the observation results, it was found that there are different deformation pattern between tow directions and effect of geometric condition on the deformation of the fabric materials during draping process was verified.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.42 no.5
• /
• pp.799-808
• /
• 2018

This study develops triacetate-containing functional fabrics with a cool-touch and cool-absorbent. For this purpose we used composite yarns made using triacetate filament and PET High absorbance quick dry filament as well as the composite fabric woven. The fineness of the yarn and structure of fabric varied the cover factor varied. The blend ratio of triacetate was differently set. When the triacetate content was the same, the cool touch of the fabric having a large cover factor and small SMD increased. The surface became smooth and the contact area became large; in addition, both the Qmax value and the cool-touch became large. In the case of similar density, the cool-touch of the fabric having a large content of triacetate increased. The cool-absorbent of the fabric containing triacetate showed a similar level of the PET High absorbance quick dry filament fabric treated with and endothermic cooling agent. It was possible to develop a functional coolness fabric with a cool-touch and a cool-absorbent when the content of triacetate and cover factor were well combined.

• Steel and Composite Structures
• /
• v.15 no.3
• /
• pp.267-279
• /
• 2013

This article describes a simple and cost effective fabrication procedure by using hand lay-up technique that is employed for the manufacturing of thin-walled axi-symmetric composite shell structures with carbon, glass and hybrid woven fabric composite materials. The hand lay-up technique is very commonly used in aerospace and marine industries for making the complicated shell structures. A generic fabrication procedure is presented in this paper aimed at manufacture of plain Carbon Fabric Reinforced Plastic (CFRP) and Glass Fabric Reinforced Plastic (GFRP) shells using hand lay-up process. This paper delivers a technical breakthrough in fabrication of composite shell structures without any joints and wrinkling. The manufacture of stiffened CFRP shells, laminated CFRP shells and hybrid (carbon/glass/epoxy) composite shells which are valued by the aerospace industry for their high strength-to-weight ratio under axial loading have also been addressed in this paper. A fabrication process document which describes the major processing steps of the composite shell manufacturing process has been presented in this paper. A study of microstructure of the glass fabric/epoxy composite, carbon fabric/epoxy composite and hybrid carbon/glass/fabric epoxy composites using Scanning Electron Microscope (SEM) has been also carried out in this paper.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2004.04a
• /
• pp.194-197
• /
• 2004

In this paper, compressive characteristics of carbon fabric skin with polymeric foam core sandwich structure were investigated by FE analyses and compressive tests of polyurethane foam were also conducted with respect to temperature changes, which were determined by curing processes of epoxy or polyester resin to obtain mechanical behaviour of polyurethane foam. FE analyses indicated variation of parameters with respect to manufacturing pressure, which have comparatively massive effect upon mechanical properties of sandwich structures, i.e. wavelength as well as crimp angle of carbon fabric

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1998.10a
• /
• pp.298-305
• /
• 1998

The purpose of this study is to propose the method of determining the initial fabric membrane structures surface and membrane patterning procedures. Tension structure, such as, fabric membrane structures and cable-net, is stabilized by their initial prestress and boundary condition. The process to find initial structural overall shape of tension structures produced by initial prestress called Shape Finding or Shape Analysis. One of the most important factor for the design of membrane structures is to search initial smooth surface, because unlike steel or concrete building elements which resist loads in bending, all tension structure forces are carried within the surface by membrane stress or cable tension. To obtain initial surface of fabric membrane element in large deformation analysis, the membrane element is idealized as cable using a technique with Force-density method. and that result is compared with well-known nonlinear numerical method, such as Newton-raphson method and Dynamic relaxation method. The shape resulting from Force-density method has been dealt with as the initial membrane shape and used patterning procedures.

• Journal of the Korean Society of Costume
• /
• v.54 no.1
• /
• pp.1-10
• /
• 2004

The purpose of this study was to compare the efficiency of four different cleaning method of silk and to fabrics, which were excavated from the sixteenth century tombs. The four cleaning methods were hand washing in water and hand washing in solvent, washing in ultrasonic cleaner, and using of ultrasonic gun after washing in ultrasonic cleaner. The following is the result of the experiment: ㆍBoth silk and jute fabrics shrank the most after hand-wash in water. This cleaning method decreased their thickness the most but changed their strength the least. However, the color of the fabric changed the most after had-wash in water. This washing method might discolor the dyed fabric, so one must check the condition of the fabric thoroughly before washing it. ㆍThe weight and the thickness of the fabric changed little after ultrasonic cleaning. This cleaning method, therefore. is less efficient than hand-water-wash. The use of ultrasonic gun after ultrasonic wash for partial cleansing enhanced the efficiency a little. Nevertheless, this method left stain around the area where the gun was used, and the injected water could damage the fabric. ㆍThe excavated fabric became softer in the cleaning process as the dirt was washed away. In both cases of silk and jute fabrics cleaning, solvent made the fabric softer than water. Washed in solvent, the fabric did not swell. But water penetrated to the fiber during the cleaning process and made the fabric swell. When the water evaporates, the swollen fiber structure collapses and the fabric become stiff. Ultrasonic wash did not cause much change in the flexibility of the fabric, for this method does not remove the dirt as effectively as the other method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.35.1-35
• /
• 2001

The aim of our study is to automatically analyze how textile is woven which has complicated structure, such as textile with multi-layer structure. For this purpose, we propose a method to reconstruct a textile structure of a textile is visualized. Then, the anteroposterior sections of the same yarn on the cross sectional images is associated each other by superimposing them. Therefore, by this method, 3-D information of each yarn is obtained and the 3-D shape of each yarn is independently expressed. In this research, a 3-D reconstruction of a plain weave fabric is performed.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.1-1
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1.The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of ζ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• Textile Coloration and Finishing
• /
• v.13 no.5
• /
• pp.289-297
• /
• 2001

As the basic study to investigate the mechanism of improvement in the dyeing fastness of natural dyes on silk fabrics the optical behavior of tannin solution, the optimal condition of tannin treatment and the changes of the physical structure of silk fabrics were studied in the treatment of tannin. Results obtained were as follows ; 1 The K/S values of tannin-treated silk fabrics were not changed by tannin content on silk fabrics but yellowing of tannin in treatment condition. 2. As the concentration of tannin was increased in its treating condition, the tannin content and K/S vague of tannin-treated silk fabrics were increased. 3. Because tannin gave rise to yellowing by hydrolysis and oxidation at high temperature, the higher tannin-treating temperature was, the lower the tannin content and K/S values of silk fabrics 4. The tannin content of silk fabric was higher in acidic treating condition and the highest K/S value was showed at pH 5. 5. As the tannin content of silk fabric was increased, the value of $\xi$ -potential of it became negative. 6. As the tannin content of silk fabric was increased, the crystallinity and crystallite size of it were decreased. This meant that the fraction of amorphous region in the fibers increased. And the degree of orientation of it was decreased with the tannin treatment.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.987-996
• /
• 2005

For cationization, if chitosan, which has the affinity for a human body and reacts easily without inducing any pollution, is used, cationization of Tencel blended fabrics can be expected and further expansion of its use as a new susceptible material can be expected. Therefore, in this study, in order to compare a Tencel/cotton and a Tencel/Cotton/PET as Tencel blended fabrics with a Tencel single fabric, the fabric samples were used and processed with chitosan after NaOH pretreatment and enzyme treatment thereof, and then its adherent efficiency was enhanced by using a crosslinking agent, and then it was got to be finished with a softener. The fibril of Tencel fabric was controlled by enzyme treatment so that the surface of the Tencel blended fabrics got to be smooth. Chitosan adhered to the surface of the Tencel blended fabrics in the form of particles through its processing with chitosan. Chitosan treatment caused little change in the crystal structure thereof and the thermal stability of the Tencel/Cotton/PET fabric was slightly improved. The total hand value(THV) calculated on the basis of the change due to chitosan treatment was increased in all samples.