• Journal of Korean Association for Spatial Structures
• /
• v.19 no.4
• /
• pp.85-94
• /
• 2019

Then 3D printing is used practically at construction sites, there is a serious lack of studies on the conflict with construction-related laws and expected operational problems. Accordingly, the purpose of this study is to present obstacles and directions for improvement in construction-related laws (Building Act, Construction Technology Promotion Act, Housing Act, Construction Machinery Management Act, etc.) for practical operation of 3D printing. The important results are as follows. Amending existing construction-related laws for 3D printing is irrational and inefficient in terms of structure and material. This study proposed a method of satisfying performance required by laws or standards based on the performance design method presented in existing laws and systems through structure and material performance certification procedure. In addition, inclusion of 3D printing equipment in the Construction Machinery Management Act results in various restrictions such as equipment inspection and certification of machine parts. As such restrictions can block vitalization of 3D printing, a long-term and step-wise approach was suggested.

• Journal of Power System Engineering
• /
• v.17 no.6
• /
• pp.79-87
• /
• 2013

The improvement of cooling efficiency for the cabinet of automatic controller is the most efficient method of it's application. Therefore, this study has been analyzed and investigated the improvement of cooling efficiency and reduction of energy for the cabinet of automatic controller, respectively. So this study was conducted to enhancement of cooling efficiency for the cabinet of automatic controller by making a structure which produces difference of air pressures in the entrance tube of external air. And the structure has capacity of the pyrogen source (PTC elements) to make temperature range from $145^{\circ}C$ to $155^{\circ}C$. Consequently, temperatures of the upper, the lower in the interior of the cabinet of automatic controller and the exhaust part were revealed $28.57^{\circ}C$, $23.38^{\circ}C$and $36.14^{\circ}C$(average temperature of the exhaust part in case of existing method : $45^{\circ}C$) in target test of this study, respectively. It was found that the cabinet of the automatic controller has better cooling ability than the cabinet of automatic controller by using an existing method.

• Journal of Broadcast Engineering
• /
• v.12 no.1 s.34
• /
• pp.28-40
• /
• 2007

In this paper, we proposes an idea for improved sound characteristic which decreasing a problem in previous reverberation algorism structure. To later reflection sound, proposed new reverberation structure, using a lopped and nested all-pass delay line, and it is designed to improve an natural concert hall sound. In addition, In order to have best imaginary sound effect, we extracted the factors by controlling each delay line's delay time, and we realized a proposed new algorithm by using general-purpose DSP. Through several experimental cases, we observed better effect on improvement of linear flatten and reverberation density and decreasing about colorlessness and non-linear sound at previous proposed model about impulse input.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.251-257
• /
• 2002

Design and characteristic improvement of existing folded dipole antenna is presented to adopt W-CDMA(1.885~2.170 GHz) wideband antenna radiators. The antenna structure has +/- 45 degrees dual polarization. In order to overcome the narrow bandwidth and low gain characteristic typical of the microstrip antenna, double layered structure was employed. The antenna achieved below - 20 dB reflection coefficients each ports, - 20 dB of port isolation, above 7 dBi of gain, providing evidence that the proposed design can be used in the W-CDMA service frequency band antenna.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.662-668
• /
• 2009

Design of IPI(Inverted PI) feeding internal antenna for the gain improvement of mobile phone was proposed. IPI feeding structure affects on both low radiation resistance of antenna and increase current for the internal antenna such as IFA(Inverted F Antenna). By these facts, antenna fed by IPI can get the gain improvement with increasing radiation efficiency. For the verification, we applied IPI feeding structure to conventional quad band IFA. Measurement shows that IPI-IFA has 0.3~2.0[dB] higher gain than conventional IFA on GSM/DCS/USPCS/WCDMA band.

• The Journal of Industrial Distribution & Business
• /
• v.8 no.7
• /
• pp.13-20
• /
• 2017

Purpose - Performance appraisal has a significant influence on the development of low-carbon tourism distribution. Research design, data, and methodology - Data of this study are collected from 27 provinces (cities) of China. SBM-Malmquist model is used to measure the TFP and its dynamic changes of low-carbon tourism distribution; TOBIT model is used to discuss the factors of TFP of low-carbon tourism distribution. Results - The results show that, there are obvious differences among regional TFP of low-carbon tourism distribution, the average change tends to grow positively in general, and the western region grows fastest on average due to the improvement of technical efficiency and technical progress, while there are technical efficiency improvement but technical regresses in eastern and central regions. The economic scale, economic strength, structure of energy consumption, location quotient and government regulation have a significant positive effect on the TFP of low-carbon tourism; energy intensity, industrial structure and opening degree have a negative effect; investments in fixed assets, intensity of R&D fund and urbanization rate have no significant influence on the TFP of low-carbon tourism. Conclusions - Improving the productivity of low-carbon tourism and reducing regional differences are effective ways to develop low-carbon tourism and enhance tourism competitiveness.

• Korea Journal of Hospital Management
• /
• v.5 no.1
• /
• pp.200-231
• /
• 2000

The price systems of the hospital drug services play key roles in the provision of quality services and the development of pharmacy service technologies. Under the premises, this study attempted to determine the costs of hospital drug service, to compare the costs calculated with the fees publicly fixed by the Government, and based on the results of the analysis, to propose directions for the improvement of the price systems. A Costing model for the study was developed based on the cost-fee relationship analysed of the Korean fee-for-service systems. Data on costs and workloads of the 25 hospitals were collected through survey forms designed for the costing' and analysis for the duration of 12 months of 1998. The results of the analysis show that a tremendous unbalance between cost and price levels of the drug services, and that overally the price level of the services is extremely low when compared to the costs of services. Based on these findings, this study suggests that unfairly high or low price level be corrected, and that service items newly developed and being practiced at tertiary hospitals, such as TDM and TPN consultation services, be compensated by fixing a proper level of price.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.994-997
• /
• 2006

We have fabricated white polymeric light-emitting devices (WPLEDs) from polyfluorene-based (PFO) blue and MEH-PPV polymer blending systems. A device structure of ITO / PEDOT:PSS / Blending polymer / Blue polymer / LiF / Al was employed. This structure of double emission layers results in the significant improvement of white color shift phenomenon. A current efficiency of 4.67 cd/A ($3,900cd/m^2$, 6.4V) and a brightness value of $17,600cd/m^2$ at 9.4 V with (0.34, 0.35) CIE coordinates at 5V and (0.29, 0.29) at 9V were obtained.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.1070-1073
• /
• 2004

In this study, Tri(1-phenylpyrazolato)iridium $(Ir(ppz)_3)$ was prepared for the pure blue phosphorescent dopant and various host materials were used for the appropriate energy alignment. Although the luminance was pure blue with the CIE coordinates of x = 0.158, y = 0.139, device efficiencies didn't improve yet. Instead of finding the proper host materials, the alteration of structure of OLEDs affected the improvement of electrical and optical characteristics of the devices. It was worthy that insertion the exciton formation zone with the host material between the emitting zone and the exciton blocking layer. The device with a structure of ITO/NPB/Ir(ppz)3 doped in CBP/CBP for the exciton formation zone/BCP/Liq/Al was fabricated and the characteristics were observed compared with the devices without the exciton formation zone. When CBP was used for the exciton formation zone, the device efficiency reached to over 0.25 cd/A. While the device used CBP only for the host showed the luminous efficiency of under 0.11 cd/A

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.17-18
• /
• 2008

In this paper, 1%-nitrogen doped Nickel was used for improvement of thermal stability of Ni-Germanide. Proposed Ni-N(1%)/TiN structure has shown better thermal stability, sheet resistance and less agglomeration characteristic than pure Ni/TiN structure. During the germanidation process, it is believed that the nitrogen atoms in the deposited nickel layer can suppress the agglomeration of Ni germanide by retarding the diffusion of Ni atoms toward silicon layer, hence improve the thermal stability of Ni-germanide.