• Economic and Environmental Geology
• /
• v.49 no.2
• /
• pp.147-153
• /
• 2016

SHRIMP U-Pb age determination was carried out for deformed granites in the Aneui quadrangle, SW Yeongnam Massif. Dating of zircons from a highly deformed mylonitic granite with banded structure and a relatively less deformed porphyritic to augenic granites, that were known as Precambrian gneisses, yielded the same age of ca. 195 Ma. On the basis of this result and previous age data, Early to Middle Mesozoic igneous activity around the Aneui area was interpreted as follows; Subduction-related granitic magmatism started with the intrusion of the Hamyang Granite in the middle Triassic (ca. 225-219 Ma) mainly in the west of the area and ended with syenitic intrusion at the end of Triassic period (ca, 220-210 Ma). After a relatively short period of quiescency, granitic magmatism restarted with the intrusion of magma forming deformed granites dated in this study at the Early Jurassic of ca. 195 Ma and continued to ca. 189 Ma and dioritic intrusion was associated around the late stage of granitic magmatism.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.487-494
• /
• 2020

The distance between the source and the detector, the diameter of the detector, and the volume effect of the radiation source result in a change in solid angle at the detector entrance, which affects the determination of detection efficiency by causing a difference in path length within the detector. A typical analysis method for calculating solid angles was useful only for a source (⁶⁰Co) with a simple geometric structure, so in this experiment, the distance between the detector and the source was measured by switching on for up to 25 cm with the reference point of window cap 0.5 cm. In addition, 450 and 1000 ㎖ Marinelli beaker of standard volumetric sources were closely adhered to the detector. For circular point sources co-axial with the detector, the change in the solid angle to the distance from the detector window is equal to half the square radius of the source versus the square radius of the detector, if the resulting relationship of the calculation analysis results in the detector being less than the radius of the source. Since the solid angular difference is 0.5 the result of Monte Carlo is acceptable. The relationship between detector and source distance is shown. Solid angles have been verified to decrease rapidly with distance. Measurement and simulation results for a volumetric source show a difference of ±1.01% from a distance of 0 cm and less than 4 % when the distance is reduced to 5 and 10 cm. It can be seen that the longer distance, the smaller efficiency angle, and the exponential increase in attenuation as the energy decreases, is reflected in the calculation of efficiency. Thus, the detection efficiency has proved sufficient for the use of solid angle and Monte Carlo codes.

• Korean Journal of Ecology and Environment
• /
• v.50 no.4
• /
• pp.432-440
• /
• 2017

Compound specific isotope analysis of amino acids (CSIA-AAs) is being highlighted as an alternative approach for overcoming some restrictions in application of stable isotope analysis of bulk tissue (SIA) for trophic position (TP) estimation. However, this approach has rarely been applied in Korea. The present study determines TP of two Polychaeta (Nephtyidae and Glyceridae) and two fish species(Platycephalus indicus and Lophius litulon) collected from the Geum River estuary using nitrogen isotope ratio of amino acid and compared with the TP values estimated by SIA. The Polychaeta species, sampled in two sites, showed similar TP between SIA(2.7 and 3.1) and CSIA-AAs (2.6 and 3.1). However, for both fish species, TP values displayed a large difference between SIA (3.1 and 2.3) and CSIA-AAs (3.8 and 3.7). In this study TP values estimated by CSIA-AAs showed more similar to the previously reported gut content analysis of both fishes compared with the results of SIA. Current study suggests the applicability of nitrogen isotope ratio of amino acid to understand coastal ecosystem structure and trophic ecology.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.3
• /
• pp.207-217
• /
• 2008

The SSTop (Sea Surface Topography) provides an estimate of the large scale structure of the deviations between the geoid height and the mean sea surface in terms of a normalized surface spherical harmonic series. The SSTop is the key information which has been used to determine the shape of earth, geoid, current and tide etc. Also, the SSTop is a basic source for the unification of vertical datums at the different height systems which were established according to the their respective purposes. In order to unify the vertical datum around the East-Asian (E-A) region (covers the area: $20^{\circ}-45^{\circ}N$ and $110^{\circ}-140^{\circ}E$), we estimated the value of SSTop in the E-A region using the predicted values of mean sea surface (from KMSS04) and geoid height (from EGM96 and EIGEN-GL04C) and analyzed to aspect of SSTop at 5 tidal stations (InCheon, JeJu, QingDao, Aburatsubo, KeeLung) with the estimated values of each station previously. The result from this study indicates that the SSTop in the E-A region is relatively stable except for the area around the Japanese and Ryukyu deep, and also shows that the distribution of values of SSTop is ranged from 40 to 60 cm at tidal stations except InCheon station.

• Applied Biological Chemistry
• /
• v.23 no.2
• /
• pp.123-130
• /
• 1980

Thiamine derivatives of thiamine tetrahydrofurfuryl disulfide (TTFD) and thiamine propyl disulfide (TPD) were obtained in a good yield and purity by use of thiothiamine $(SB_1)$ and also described in details for the preparing sodium tetrahydrofurfuryl thiosulphate (Bunte's salt) with and without KI. The optimum reaction conditions for the preparation of TTFD was set in which the Box-Wilson plan was applied. The reaction conditions are as follows; 1. pH value of aqueous solution of thiol type of $B_1{\cdot}HCl;12.09$ 2. Quantity of Bunte's salt (to $B_1{\cdot}HCl\;20G$); 35.01g 3. Reaction temperature; $15.59^{\circ}C$ Studies on ultraviolet absorption were made at various pH and showed that the absorption maxima are shifted with change of pH. The absorption maxima are at $244{\sim}246nm,\;234{\sim}235nm$ in TTFD, and $245{\sim}246nm,\;233{\sim}235nm$ in TPD. The structure was proved by the infrared spectral evidence. Quantitative determination was studied.

• Tunnel and Underground Space
• /
• v.28 no.1
• /
• pp.111-124
• /
• 2018

The purpose of this study is to analyze ventilation design factor for network-type double-deck road tunnel that have been developed actively around the world. A numerical analysis was carried out through computational fluid dynamics (CFD) to derive shock loss coefficient that occurs due to the change in cross sectional area at both merging section and diverging section. The model used for the numerical analysis is real-scale model and the reliability of the result is secured by comparing with the coefficient of the previous studies. As a result of this study, shock loss coefficient was calculated depending on the change in cross-sectional area ratio and was higher than the result of previous studies in case of both merging section and diverging section. It is considered that the characteristics of the geometrical structure of network-type double-deck road tunnel have a great impact on shock loss coefficient. Therefore, the result of this study is expected to be helpful for more accurate ventilation design of network-type double-deck road tunnel.

• Journal of Korean Society on Water Environment
• /
• v.28 no.3
• /
• pp.347-358
• /
• 2012

The SWAT (Soil and Water Assessment Tool) should be calibrated and validated with observed data to secure accuracy of model prediction. Recently, the SWAT-CUP (Calibration and Uncertainty Program for SWAT) software, which can calibrate SWAT using various algorithms, were developed to help SWAT users calibrate model efficiently. In this study, three algorithms (GLUE: Generalized Likelihood Uncertainty Estimation, PARASOL: Parameter solution, SUFI-2: Sequential Uncertainty Fitting ver. 2) in the SWAT-CUP were applied for the Soyang-gang dam watershed to evaluate these algorithms. Simulated total streamflow and 0~75% percentile streamflow were compared with observed data, respectively. The NSE (Nash-Sutcliffe Efficiency) and $R^2$ (Coefficient of Determination) values were the same from three algorithms but the P-factor for confidence of calibration ranged from 0.27 to 0.81 . the PARASOL shows the lowest p-factor (0.27), SUFI-2 gives the greatest P-factor (0.81) among these three algorithms. Based on calibration results, the SUFI-2 was found to be suitable for calibration in Soyang-gang dam watershed. Although the NSE and $R^2$ values were satisfactory for total streamflow estimation, the SWAT simulated values for low flow regime were not satisfactory (negative NSE values) in this study. This is because of limitations in semi-distributed SWAT modeling structure, which cannot simulated effects of spatial locations of HRUs (Hydrologic Response Unit) within subwatersheds in SWAT. To solve this problem, a module capable of simulating groundwater/baseflow should be developed and added to the SWAT system. With this enhancement in SWAT/SWAT-CUP, the SWAT estimated streamflow values could be used in determining standard flow rate in TMDLs (Total Maximum Daily Load) application at a watershed.

• Korean Journal of Weed Science
• /
• v.15 no.1
• /
• pp.73-84
• /
• 1995

Four malformin A's produced by Aspergillus niger van Tiegh. were separated by HPLC equipped with $C_{18}$ reversed-phase column and subjected to structural determination. Amino acid analyses and mass spectra data of the compounds indicate that they structurally resemble the cyclic pentapeptide malformin $A_1$. Their structures were deduced by two dimensional NMR and MS/MS experiments as cyclo-D-Cys-D-Cys-L-Val-D-Leu-L-Ile for $A_1$, cyclo-D-Cys-D-Cys-L-Val-D-Leu-L-Val for $A_2$, cyclo-D-Cys-D-Cys-L-Val-D-Leu-L-Leu for $A_3$, and cyclo-D-Cys-D-Cys-L-Val-D-Ile-L-Val for $A_4$. Among the mal-formin A's, the structure of $A_3$ was identical to that of malformin C, which was produced by A. niger strain AN-1. All the malformin A's caused severe curvatures of corn(Zea mays L.) roots and the activities of the malformin A's with molecular weight 529 were greater than those with molecular weight 515. Malformin $A_1$ caused the corn root curvature by 83% at a concentration of $0.25{\mu}M$. In the mung bean(Phaseolus aureus Roxb.) hypercotyl segment test, however, the molecular weight of malformin A's was not a factor influencing the physiological activities. Malformin $A_1$ stimulated the growth of mung bean hypercotyles by 165% at a $0.1{\mu}M$ concentration.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.2
• /
• pp.131-141
• /
• 2004

For geotechnical applications, engineers use data obtained from a site investigation to interpret the structure and potential behavior of the subsurface. In most cases, these data consist of samples that represent 1/100,000 or less of the total volume of soil. These samples and associated field and lab testing provide the information used to estimate soil parameter values. The resulting values are estimated ones and there exists some likelihood that actual soil conditions are significantly different from the estimates. This may be the case even if the sampling and interpretation procedures are performed in accordance with standard practice. Although these efforts have been made to characterize the uncertainty associated with geotechnical parameters, there is no commonly accepted method to evaluate quantitatively the quality of an investigation plan as a whole or the relative significance of individual sampling points or potential sampling points.

• Journal of the Korean Geosynthetics Society
• /
• v.16 no.4
• /
• pp.211-219
• /
• 2017

The spray-applied waterproofing membrane is installed on shotcrete or concrete surface to make impermeable layer with 3-5 mm thick for the purpose of waterproofing. This study aims to determine the internal structure of a spray-applied waterproofing membrane including pores by using X-ray CT technique. Before obtaining X-ray images of the membrane specimens, a waterproof performance test was performed on the membrane specimens with a water pressure of 500 kPa for 28 days. Results show that the movement of moisture is made through micropores. This is based on the fact that the large pores inside the membrane are not saturated and the degrees of saturation of the micropores are high. X-ray image is effective for determining the pore size distribution and whether the membrane with pores contains the water However, it is necessary to pay attention to the determination of water content, since water content may vary depending on the threshold value of X-ray image analysis applied to calculate the water content.