• 한국터널지하공간학회 논문집
• /
• 제13권5호
• /
• pp.413-430
• /
• 2011

최근 들어, 폭발하중에 대해여 안전한 사회기반시설에 대한 관심이 증가하고 있다. 폭발하중은 가스폭발이나 폭탄 폭발에 의하여 발생된다. 본 연구에서는 가스폭발하중을 받는 터널구조물을 각 부재로 나누어 1자유도 질량-스프링-감쇠기 모델로 치환하여 해석하는 모델을 개발하였다. 간이 모델을 사용하여 터널설계 요인인 최대 폭발하중크기, 지속시간, 부재 두께, 토피고에 대하여 민감도 해석을 수행하였다. 또한, 유한요소법을 사용하여 가스폭발에 대한 터널의 동적거동과 주변지반에 발생되는 파괴영역에 대하여 조사하였다. 1자유도 질량-스프링-감쇠기 모델과 FEM 해석결과의 비교로부터 터널의 중앙벽에 대한 동적거동결과는 거의 차이가 없음을 보여주었다.

• 한국터널지하공간학회 논문집
• /
• 제3권4호
• /
• pp.3-15
• /
• 2001

일반적으로 지진발생시 터널구조물은 지상구조물에 비해 입는 피해가 매우 작다고 해서 내진설계에 대한 인식이 부족하였다. 그러나, 현재까지 많은 유형의 지하터널이 건설되었고, 앞으로는 더 많은 건설계획이 있으므로 지진시 지하터널구조물에 대한 안정성 확보가 중요하고 많은 연구가 필요하다. 본 논문에서는 지진발생시 터널의 동적거동을 파악하고, 적절한 내진해석을 제안하기 위해서 응답변위법과 동적해석법을 이용하여 내진해석을 실시하였다. 해석 결과는 지진발생시 터널구조물이 지반의 변형에 순응한다는 것을 나타내었고, 응답변위법에 의한 내진해석이 동적해석법에 의한 것보다 대부분의 경우 더 보수적인 해석이라는 것을 보여주었으며, 마지막으로 동적해석시 간편화된 2차원유한요소해석이 복잡한 3차원해석보다 내진해석시 더 효율적이라는 것을 보여주었다. 갱구부의 내진해석결과에서는 지진파가 터널축과 평행하게 진행할 때 갱구부에 설치된 라이닝에 가장 큰 단면력이 발생하는 것으로 나타났다.

• 한국컴퓨터산업학회논문지
• /
• 제2권6호
• /
• pp.827-836
• /
• 2001

데이터는 컴퓨터 시스템에서 파일구조로 나타난다. 그러나 파일의 크기는 매우 커지고, 그것을 제어하고 전송하기에 어려운 점이 있다. 그래서 최근에 데이터 압축에 대한 새로운 알고리즘이 개발되고 있다. 그래서 본 논문에서는 허프만 압축기법의 단점을 보완하여 새로운 동적 압축 기법을 제안하고자 한다. 허프만 압축 기법에는 두 가지 단점이 있다. 첫 번째로 처음 파일내의 문자의 빈도수를 구할 때와 실제로 압축하기 위해서 동작할 때, 파일을 두 번 읽어들인다는 것과, 두 번째로, 트리에 대한 정보를 같이 저장해야되기 때문에, 그 만큼 압축 효율이 떨어진다는 것이다. 이러한 단점은 본 논문에서 제시한 방법은, 동적인 형태로 재배치된 데이터를 한번에 읽어들일 수 있고, 파이프라인 구조로 트리의 정보를 저장할 수 있기 때문에, 새로운 동적 재배치 방법으로 해결할 수 있다.

• Computers and Concrete
• /
• 제26권3호
• /
• pp.227-237
• /
• 2020

Strain rate investigations are needed to calibrate strain-rate-dependent material models and numerical codes. An appropriate material model, which considers the rate effects, need to be used for proper numerical modeling. The plastic concrete cut-off wall is a special underground structure that acts as a barrier to stop or reduce the groundwater flow. These structures might be subjected to different dynamic loads, especially earthquake. Deformability of a structure subjected to dynamic loads is a principal issue which need to be undertaken during the design phase of these structures. The characterization of plastic concrete behavior under different strain rates is essential for proper designing of cut-off walls subjected to dynamic loads. The Cowper-Symonds model, as one of the most commonly applied material models, complies well with the behavior of a plastic concretes in low to moderate strain rates and will be useful in explicit dynamics simulations. This paper aims to present the results of an experimental study on mechanical responses of one of the most useful types of plastic concrete and Cowper-Symonds constant determination procedures in a wide range of strain rate from 0.0005 to 107 (1/s). For this purpose, SHPB, uniaxial, and triaxial compression tests were done on plastic concrete samples. Based on the results of quasi-static and dynamic tests, the dynamic increase factors (DIF) of this material in different strain rates and stress state conditions were determined for calibration of the Cowper - Symonds material models.

• 한국터널지하공간학회 논문집
• /
• 제19권5호
• /
• pp.717-732
• /
• 2017

최근 급증하는 도로 교통량을 원활히 처리할 수 있는 대안으로 복층터널과 같은 지하구조물의 건설이 증가하고 있다. 복층터널은 내부에 상부와 하부를 분리하는 중간슬래브가 존재한다. 중간슬래브는 차량이 주행할 때 발생하는 차량의 동적하중으로 인하여 동적거동을 하게 되며, 그 동적거동을 정확히 파악하여 설계 및 해석에 이용하는 것이 중요하다. 본 연구에서는 복층터널 중간슬래브의 구조형식, 설계속도, 주행차량 및 노면조도 등을 고려한 해석모델을 작성하고 노면에 차량이 일정속도로 주행하는 경우에 대해 3차원 동적해석을 수행하여 복층터널 중간슬래브의 동적거동을 분석하였다. 그 결과, 중간슬래브의 동적영향을 대표하는 동적확대계수는 탄성받침 지지조건 및 보통의 노면조도 조건에서 가장 크게 증폭되는 경향을 보였고, 양호한 노면조도와 강결연결 조건에 의해 동적영향을 작게 할 수 있음을 확인하였다.

• Steel and Composite Structures
• /
• 제8권1호
• /
• pp.53-83
• /
• 2008

A rational and efficient seismic design methodology for irregular space steel frames using advanced methods of analysis in the framework of Eurocodes 8 and 3 is presented. This design methodology employs an advanced static or dynamic finite element method of analysis that takes into account geometrical and material non-linearities and member and frame imperfections. The inelastic static analysis (pushover) is employed with multimodal load along the height of the building combining the first few modes. The inelastic dynamic method in the time domain is employed with accelerograms taken from real earthquakes scaled so as to be compatible with the elastic design spectrum of Eurocode 8. The design procedure starts with assumed member sections, continues with the checking of the damage and ultimate limit states requirements, the serviceability requirements and ends with the adjustment of member sizes. Thus it can sufficiently capture the limit states of displacements, rotations, strength, stability and damage of the structure and its individual members so that separate member capacity checks through the interaction equations of Eurocode 3 or the usage of the conservative and crude q-factor suggested in Eurocode 8 are not required. Two numerical examples dealing with the seismic design of irregular space steel moment resisting frames are presented to illustrate the proposed method and demonstrate its advantages. The first considers a seven storey geometrically regular frame with in-plan eccentricities, while the second a six storey frame with a setback.

• 한국공간구조학회논문집
• /
• 제3권1호
• /
• pp.35-46
• /
• 2003

Conventional analysis and design of steel structures are performed using the assumption of a either fully rigid or pinned. However, every steel connection lies in between fully rigid and pinned connection. So, It is important to consider the connection for steel structure design. In this paper Computer-based second-order elastic analysis is used to calculate one story two bay and two story three bay for steel structures with semi-rigid connection. Genetic Algorithms(GAs) and Sequential Unconstrained Minized Technique(SUMT) dynamic programming is used to the method for optimum design of steel structures. The efficiency and validity of the developed continuous and discrete optimum design algorithm was verified by applying the algorithm to optimum design examples.

• 한국자동차공학회논문집
• /
• 제2권3호
• /
• pp.50-61
• /
• 1994

A method for performing dynamic design sensitivity analysis of vehicle suspension systems which have three dimensional closed-loop kinematic structure is presented. A recursive form of equations of motion for a MacPherson suspension system is derived as basis for sensitivity analysis. By directly differentiating the equations of motion with respect to design variables, sensitivity equations are obtained. The direct generalize for the application of multibody dynamic sensitivity analysis. Based on the proposed sensitivity analysis, optimal design of a MacPherson suspension system is carried out taking unsprung mass, spring and damping coefficients as design variables.

• 한국공간구조학회논문집
• /
• 제17권4호
• /
• pp.123-132
• /
• 2017

A smart tuned mass damper (TMD) was developed to provide better control performance than a passive TMD for reduction of earthquake induced-responses. Because a passive TMD was developed decades ago, optimal design methods for structural parameters of a TMD, such as damping constant and stiffness, have been developed already. However, studies of optimal design method for structural parameters of a smart TMD were little performed to date. Therefore, parameter studies of structural properties of a smart TMD were conducted in this paper to develop optimal design method of a smart TMD under seismic excitation. A retractable-roof spatial structure was used as an example structure. Because dynamic characteristics of a retractable-roof spatial structure is changed based on opened or closed roof condition, control performance of smart TMD under off-tuning was investigated. Because mass ratio of TMD and smart TMD mainly affect control performance, variation of control performance due to mass ratio was investigated. Parameter studies of structural properties of a smart TMD was performed to find optimal damping constant and stiffness and it was compared with the results of optimal passive TMD design method. The design process developed in this study is expected to be used for preliminary design of a smart TMD for a retractable-roof spatial structure.

• Structural Engineering and Mechanics
• /
• 제36권1호
• /
• pp.79-94
• /
• 2010

This study shows how uncertainties of data like material properties quantitatively have an influence on structural topology optimization results for dynamic problems, here such as both optimal topology and shape. In general, the data uncertainties may result in uncertainties of structural behaviors like deflection or stress in structural analyses. Therefore optimization solutions naturally depend on the uncertainties in structural behaviors, since structural behaviors estimated by the structural analysis method like FEM need to execute optimization procedures. In order to quantitatively estimate the effect of data uncertainties on topology optimization solutions of dynamic problems, a so-called interval analysis is utilized in this study, and it is a well-known non-stochastic approach for uncertainty estimate. Topology optimization is realized by using a typical SIMP method, and for dynamic problems the optimization seeks to maximize the first-order eigenfrequency subject to a given material limit like a volume. Numerical applications topologically optimizing dynamic wall structures with varied supports are studied to verify the non-stochastic interval analysis is also suitable to estimate topology optimization results with dynamic problems.