• The Plant Pathology Journal
• /
• 제24권4호
• /
• pp.392-399
• /
• 2008

Detached chili pepper fruits were inoculated with the conidial suspension of Colletotrichum acutatum JC-24 simultaneously (simultaneous inoculation, SI) and at delayed time (delayed inoculation, DI) after wounding with (delayed wound inoculation, DWI) or without additional wounding (delayed non-wound inoculation, DNI) at the inoculation time. Disease severity was significantly lowered by DNI, compared to SI. By DNI, the disease reduction rates were proportional with the length of delayed time, and greater at the high temperature range (18, 23 and $28^{\circ}$) than at the low temperature ($13^{\circ}$) tested. DWI was also effective in reducing the disease severity especially at 18oC; however, its effectiveness was lower than for DNI. In light microscopy, parenchyma cells at the wounding sites were modified structurally, initially forming new cell walls crossing cytoplasm, enlarged with multiple periclinal cell divisions, and finally layered like wound periderms. In DWI, the above structural modifications occurred, showing the restriction of the fungal invasion by the cell walls in enlarged modified cells, while no definite cellular modifications were found with proliferation of fungal hyphae in SI. Sclerenchyma-like cells with thickened cell walls were proliferated around the wounding sites, which were partially dissolved by DWI, probably leading to some disease development. All of these results suggest that the decline of the anthracnose disease in pepper fruit by the delayed inoculations may be derived from the structural modifications related to the healing processes of the previous wound inflicted on the tissues.

• 전기학회논문지P
• /
• 제65권1호
• /
• pp.31-40
• /
• 2016

The purpose of this study is to dimensionally examine the factors of policy changes by applying the ACMS model to KEPCO's structural reorganization privatization policies and study its implications. As a result of the analysis, among the external variables that affect as a financial source or restriction to advocates, all areas except for the difference in opinion of the people as well as policy decision and effects of other subordinate systems were shown to be in an advantageous condition acting as a financial source to advocates of structural reorganization privatization. On the other hand, advocates affected by the external variables share a certain belief system in which the advocates of privatization share the justification of profitability while the advocates of collectivization share the justification of publicness. In these flows, the announcement of the privatization plan of public enterprises of the committee of planning and budgeting acts as a matter of contact which opens the windows for policy changes, and this window goes through ignition, explosion, and fixation which causes fierce interactions among advocates of both sides. Eventually, in accordance with the contents of excluding electricity(KEPCO) from the list for privatization the window for policy changes has closed and things have changed to a transitional KEPCO privatization policy. Based on this, the first implication is that non-official participants such as the people, social organizations, labor unions, etc. influence policy changes more than they did before. Secondly, in the process of policy changes, there is an order of boundary even in the fierce interactions between each advocate. Thirdly, specific variables can play various roles in complex policy phenomenon. Fourthly, a logical analysis using the ACMS model is possible in Korea as well. Fifthly, as a result of analyzing the change process of the KEPCO structural reorganization privatization policy through the ACMS model, not all matched with the main research results implied by the ACMS model.

• Smart Structures and Systems
• /
• 제26권2호
• /
• pp.227-239
• /
• 2020

Despite proven effectiveness and accuracy in laboratories, the existing damage assessment based on guided ultrasonic waves (GUWs) or acoustic emission (AE) confronts challenges when extended to real-world structural health monitoring (SHM) for railway tracks. Central to the concerns are the extremely complex signal appearance due to highly dispersive and multimodal wave features, restriction on transducer installations, and severe contaminations of ambient noise. It remains a critical yet unsolved problem along with recent attempts to implement SHM in bourgeoning high-speed railway (HSR). By leveraging authors' continued endeavours, an SHM framework, based on actively generated diffuse ultrasonic waves (DUWs) and a benchmark-free condition contrast algorithm, has been developed and deployed via an all-in-one SHM system. Miniaturized lead zirconate titanate (PZT) wafers are utilized to generate and acquire DUWs in long-range railway tracks. Fatigue cracks in the tracks show unique contact behaviours under different conditions of external loads and further disturb DUW propagation. By contrast DUW propagation traits, fatigue cracks in railway tracks can be characterised quantitatively and the holistic health status of the tracks can be evaluated in a real-time manner. Compared with GUW- or AE-based methods, the DUW-driven inspection philosophy exhibits immunity to ambient noise and measurement uncertainty, less dependence on baseline signals, use of significantly reduced number of transducers, and high robustness in atrocious engineering conditions. Conformance tests are performed on HSR tracks, in which the evolution of fatigue damage is monitored continuously and quantitatively, demonstrating effectiveness, adaptability, reliability and robustness of DUW-driven SHM towards HSR applications.

• 대한건축학회논문집:계획계
• /
• 제35권11호
• /
• pp.117-128
• /
• 2019

The necessity of the Toi-Maru has increased greatly in order to enter to the building or to move conveniently in the building after the mid-Joseon period, when the combination of On-dol Ma-ru began to be universally used. According to this process, the 3-Dori type upper structure is thought to have undergone the typological changed by securing a more stable space of Toi-Maru In cases where a relatively large girder was used, it is often the case that the space is divided using a pillar to place a Toi-Maru on the front. However, it is difficult to find a case where the width of the Toi-Maru exceeds 1meter due to its structural limit. The type that made additional Toi-girder to overcome the spatial constraint of this structure and replaced the method of former typology after Mid-Jpseon period. In case of 5-Dori type, Toi-Maru installed in between high post and Toi post in early period. In these type, the width of Toi-Maru was subordinated by the location of milled Dori of roof structure and sometimes it became too excessive. 5-Dori type with Pyon-ju occurred to overcome these restriction between the width of Toi-Maru and the location of milled Dori of roof structure. Not a few remains of Mid-Jpseon period keeping the evidences of changing process of roof structure provoked by Toi-Maru installation. The consistent process of Toi-Maru installation and structural adjustment will be focused to consider the attempt to spatial requirement and architectural reaction in Mid-Joseon perid.

• 한국항해항만학회지
• /
• 제32권1호
• /
• pp.23-27
• /
• 2008

컨테이너 크레인의 설계 시 적용되는 하중 조건 중에서 풍하중이 가장 중요하게 고려되어지는바, 본 연구는 75m/s의 풍하중이 컨테이너 크레인에 작용 할 때 컨테이너 크레인의 구조적 안정성에 미치는 영향을 보다 정확하게 예측하기 위하여 유동-구조 연성해석을 실시하였다. 컨테이너 크레인에 작용하는 실제 유동현상을 고려하기 위하여 먼저 전산유동해석을 실시하였으며, 이를 통해서 얻어진 풍하중을 구조해석의 하중조건으로 적용하는 유동-구조 연성해석을 통하여 컨테이너 크레인 각 지지점에서의 반력을 도출하고 그 결과를 분석하였다. 사용된 모델은 주변 환경으로 인하여 컨테이너 크레인의 최대 고도가 제한 될 경우 사용되는 관절형 컨테이너 크레인이며 전산유동해석 및 유동-구조 연성해석 프로그램으로는 ANSYS ICEM CFD 10.0과 ANSYS CFX 10.0을 사용하였다.

• 한국전산구조공학회논문집
• /
• 제20권2호
• /
• pp.165-179
• /
• 2007

이 논문에서는 철근콘크리트 구조물의 최적설계를 위해 기둥과 보 부재 설계 단면의 데이터베이스를 구성하고 이로부터 단면 번호와 단면 저항 능력간의 관계를 나타내는 회귀분석식을 구성하여, 직접 탐색법으로 빠르게 최적해를 검색하는 효율적인 알고리즘을 제안하였다. 설계 실무에서 가격을 고려하여 설계하기보다는 성능 최적화에 가까운 설계를 수행한다는 사실로부터 제안된 알고리즘을 이용하여 성능 최적화와 가격 최적화를 모두 수행하여 그 결과를 비교 검토하였고, 예제 구조물을 대상으로 적용성과 효율성을 검토하였다. 본 알고리즘은 목적 함수 구성시 제한 조건이 없고 전개 과정이 매우 단순하면서도 빠른 수렴성을 보이며 선택된 해가 설계 규준과 실무상의 제한 조건에 부합하므로 바로 적용 가능하다는 장점이 있다. 전체 구조물의 최적화는 개별 부재의 최적화를 통해 이루어진다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1999년도 제17회 학술발표회 논문개요집
• /
• pp.140-140
• /
• 1999

Ti/Ni multilayered films (MLF) are ideal for neutron optics particularly in neutron guides and focusing devices. This system also possesses the tendency of amorphization through a solid-state reaction (SSR). This behaviors are closely related to the electronic structures and both magneto-optical (MO) and optical properties of metals depend strongly on their electron energy structures. Mutual inter-diffusion of the Tin and Ni atoms in the MLF caused by a low temperature annealing should decrease the thickness of pure Ni, as well as change the chemical and atomic order in the reactive zone. The application of the MO spectroscopy to the study of SSR in the MLF allows us to obtain an additional information on the changes in the atomic and chemical orders in the interface region. The optical one has no restriction on the magnetic state of the constituent sublayers. Therefore, the changes in magnetic, MO and optical properties of the Ti/Ni MLF due to SSR can be expected. To the best of our knowledge, the MO and optical spectroscopies were not used for this purpose. SSR has been studied in the series of the Ti/Ni MLFs with bilayer periods of 0.65-22.2nm and constant ratio of the Ti to Ni sublayers thickness by using MO and optical spectroscopies as well as an x-ray diffraction. The experimental MO and optical spectra are compared with the computer-simulated spectra, assuming various interface models. The relative changes in the x-ray diffraction spectra and MO properties of the Ti/Ni MLF caused by annealing are bigger for the multilayers with "thick" sublayers, or the SSR with the formation of amorphous alloy takes place mainly in the Ti/Ni multilayers with "thick" sublayers, while in the nominal threshold thickness of the Ni-sublayer for the observation of the equatorial Kerr effect in the as-deposited and annealed Ti/Ni MLFs of about 3.0 and 4.5nm thick is explained by the formation of amorphous alloy during the deposition or the formation of the nonmagnetic alloyed regions between pure components as a result of the SSR. For the case of Ti/Ni MLF the MO approach is more sensitive for the determination of the thickness of the reacted zone, while x-ray diffraction is more useful for structural analyses.structural analyses.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.211-222
• /
• 2004

최근의 장기적인 건설경기의 침체와 부동산에 관련된 각종 규제의 강화로 인하여 건설회사는 신규사업에 대한 투자를 최소화하면서 동시에 많은 이익을 창출 하고자 한다 따라서 새로운 건축물에 대한 신축 보다는 기존의 건축물에 대한 리모델링을 선호하고 있는 실정이다. 또한 리모델링은 기존의 건축물에 대한 철거와 신축이라는 방법과 비교해 보았을 경우 폐기물의 배출 및 사용 자원의 수량 등의 측면에서 보다 환경적 이라고 할 수 있다. 이에 본 연구는 주거용 건축물인 아파트를 대상으로 합리적인 리모델링의 방법을 결정하기 위해 실수요자의 요구조건을 고려한 리모델링의 방법을 제안하였다 이를 위하여 먼저 리모델링 방법의 평가과정에 대한 이론적 고찰을 실시하고 이후 사용자의 요구조건의 수렴 과정을 정리하기 위한 가치평가 기준을 마련하고 이를 이용하여 리모델링 방법에 대한 평가를 실시하도록 한다 리모델링의 방법은 그 자체가 매우 다양할 뿐만 아니라 요구조건 또한 매우 다양 하므로 평가과정에서 의사결정기법인 계층적 의사결정기법을 적용하도록 한다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권1호
• /
• pp.95-102
• /
• 2011

두께가 얇은 강관을 사용한 CFT기둥은 강관의 국부좌굴에 대한 구속효과로 내력상승을 기대할 수 있으므로 폭두께비가 작은 강관 CFT기둥에 비해 경제성을 확보할 수 있다. 본 논문의 목적은 각형 CFT기둥에 대한 기존 설계식의 타당성을 입증하고, 내력 증대에 따른 강관 폭두께비의 사용성 한계를 확인하고자 하였다. 실험의 주요변수로는 강관의 폭두께비, 콘크리트 각 주의 높이 및 콘크리트 충전 유무로 하였다. 실험결과, 고강도 콘크리트를 충전한 박판의 각형강관기둥에서 충전콘크리트의 압축내력에 대한 강관의 구속효과가 크게 나타났으며, 비선형 해석에 따르면, 실험결과에 의한 내력은 전체 CFT단주 실험체에서 해석값보다 다소 크게 나타남을 알 수 있었다.

• Genomics & Informatics
• /
• 제13권2호
• /
• pp.53-59
• /
• 2015

In developing countries threat of cholera is a significant health concern whenever water purification and sewage disposal systems are inadequate. Vibrio cholerae is one of the responsible bacteria involved in cholera disease. The complete genome sequence of V. cholerae deciphers the presence of various genes and hypothetical proteins whose function are not yet understood. Hence analyzing and annotating the structure and function of hypothetical proteins is important for understanding the V. cholerae. V. cholerae O139 is the most common and pathogenic bacterial strain among various V. cholerae strains. In this study sequence of six hypothetical proteins of V. cholerae O139 has been annotated from NCBI. Various computational tools and databases have been used to determine domain family, protein-protein interaction, solubility of protein, ligand binding sites etc. The three dimensional structure of two proteins were modeled and their ligand binding sites were identified. We have found domains and families of only one protein. The analysis revealed that these proteins might have antibiotic resistance activity, DNA breaking-rejoining activity, integrase enzyme activity, restriction endonuclease, etc. Structural prediction of these proteins and detection of binding sites from this study would indicate a potential target aiding docking studies for therapeutic designing against cholera.