Multi-fidelity uncertainty quantification of high Reynolds number turbulent flow around a rectangular 5:1 Cylinder
-
- Wind and Structures
- /
- 제34권1호
- /
- pp.127-136
- /
- 2022
In this work a multi-fidelity non-intrusive polynomial chaos (MF-NIPC) has been applied to a structural wind engineering problem in architectural design for the first time. In architectural design it is important to design structures that are safe in a range of wind directions and speeds. For this reason, the computational models used to design buildings and bridges must account for the uncertainties associated with the interaction between the structure and wind. In order to use the numerical simulations for the design, the numerical models must be validated by experi-mental data, and uncertainties contained in the experiments should also be taken into account. Uncertainty Quantifi-cation has been increasingly used for CFD simulations to consider such uncertainties. Typically, CFD simulations are computationally expensive, motivating the increased interest in multi-fidelity methods due to their ability to lev-erage limited data sets of high-fidelity data with evaluations of more computationally inexpensive models. Previous-ly, the multi-fidelity framework has been applied to CFD simulations for the purposes of optimization, rather than for the statistical assessment of candidate design. In this paper MF-NIPC method is applied to flow around a rectan-gular 5:1 cylinder, which has been thoroughly investigated for architectural design. The purpose of UQ is validation of numerical simulation results with experimental data, therefore the radius of curvature of the rectangular cylinder corners and the angle of attack are considered to be random variables, which are known to contain uncertainties when wind tunnel tests are carried out. Computational Fluid Dynamics (CFD) simulations are solved by a solver that employs the Finite Element Method (FEM) for two turbulence modeling approaches of the incompressible Navier-Stokes equations: Unsteady Reynolds Averaged Navier Stokes (URANS) and the Large Eddy simulation (LES). The results of the uncertainty analysis with CFD are compared to experimental data in terms of time-averaged pressure coefficients and bulk parameters. In addition, the accuracy and efficiency of the multi-fidelity framework is demonstrated through a comparison with the results of the high-fidelity model.
The article proves the idea that the protection and development of Ukraine as an independent, sovereign state requires the education of a patriot citizen who is able to live and work in a democracy, ensure the unity of Ukraine, feel constant responsibility for himself, his people, the country, and strive to make a real contribution to reform processes, especially in unstable, wartime. The main goal of educational institutions in the system of educational work of the modern information space is revealed. The tasks of patriotic education of the individual are presented. The content of patriotic education at the wartime stage and the main characteristics of the content of patriotism are substantiated. The main methodological positions that are taken into account in the construction of the structure and dynamics of the formation of civil responsibility of the individual are highlighted. The structure of civic responsibility as an integral system of the modern information space is drawn, which includes three subsystems that characterize the natural, social and systemic qualities of citizenship, interconnected hierarchically and synergistically. The components of the structural part of the model of civil culture of the individual in the modern information space are analyzed.Modern modernization of the education system in the modern information space, which has led to the emergence of a new type of Educational Institutions, requires the search for new pedagogical technologies that can ensure the formation of a patriotic citizen with an active civic position, which involves not only mastering students' knowledge about the rights and obligations of citizens, convincing them of the expediency of democratic transformations of society, the formation of high moral and strong-willed, patriotic qualities and feelings, but also identifying motivated civic actions, actions that are necessary during martial law in Ukraine.
소음공해는 인간과 해양환경에 악영향을 끼치며, 선박과 해양구조물에서 발생하는 유동소음을 예측을 통해 소음에 대한 안전성을 평가하고 해양환경을 보존할 수 있다. 기존 수중구조 유동소음 해석기법은 전산유체역학과 FW-H음향상사식을 이용한 하이브리드법 기반이다. FW-H는 무한공간에서의 음향전파를 가정하여 소음해석을 수행하기 때문에 음파의 반사와 산란, 회절의 영향이 나타나는 근접장 해석이 제한적이다. 반면 격자볼츠만기법 기반의 직접법 유동소음해석을 수행하면 근접장 음향효과를 소음해석에 반영할 수 있다. 직접법 해석은 유동과 소음이 연성된 해석이 수행되고 구조경계에서의 반사와 회절, 유동에 의한 매질 불균일성에 따른 산란효과가 반영된다. 그간 격자볼츠만기법이 수중조건에서 수치적으로 불안정하여 수중환경에 적용이 불가능했다. 하지만 수중환경에서 사용할 수 있는 DM-TS 격자볼츠만기법 충돌연산자가 개발되어 수중으로 확장이 가능해졌다. 본 연구에서는 파이프내 원형구멍에 대하여 격자볼츠만기법 해석을 수행해 수중 유동소음해석이 가능함을 보였다. 격자볼츠만기법 해석을 통해 도출한 유동과 소음을 각각 실험과 비교하여 해석의 신뢰도를 확보하였다. 파이프내 유동소음에 의한 주요 압력 피크가 해석에 반영되었으며 이를 통해 격자볼츠만기법을 이용한 근접장 유동소음해석이 가능함을 확인했다.
To improve the seismic performance of suspended ceiling structures, various vibration-damping devices have been developed. However, the devices made of metals have a limit in that they cause large deformation and seriously damages the exterior of the suspended ceiling structure from the wall. As a results, their strengthening effect of the suspended ceiling structure was minimal. Thus, this study employed a spring and vibration-proof rubber effectively controlled vibrations without increasing horizontal seismic loads on the ceiling to enhance the seismic resistance of suspended ceiling structures. The objective of the study is to examine the dynamic properties of a seismic damping-isolation unit (SDI) with various details developed. The developed SDI was composed of a spring, embossed rubbers, and prestressed bolts, which were the main factors enhancing the damping effect. The shaking table tests were performed on eight SDI specimens produced with the number of layers of embossed rubber (ns), presence or absence of a spring, prestressed force magnitude introduced in bolts (fps), and mass weight (Wm) as the main parameters. To identify the enhancement effect of the SDI, the dynamic properties of the control specimen with a conventional hanger bolt were compared to those of the SDI specimens. The SDI specimens were effective in reducing the maximum acceleration (Ac max), acceleration amplification factor (αp), relative displacement (δR), and increasing the damping ratio (ξ) when compared to the control specimen. The Ac max, αp, and δR of the SDI specimens with two rubbers, spring, and fps of 0.1fby, where fby is the yielding strength of the screw bolt were 57.8%, 58.0%, and 61.9% lower than those of the conventional hanger bolt specimens, respectively, resulting in the highest ξ (=0.127). In addition, the αp of the SDI specimens was 50.8% lower than those specified in ASCE 7 and FEMA 356. Consequently, to accurately estimate the αp of the SDI specimens, a simple model was proposed based on the functions of fps, stiffness constant of the spring (K), Wm, and ns.
글로벌 공급사슬망 내 항만은 서로 복합한 물류 네트워크시스템을 형성하고 있다. 많은 연구자들은 SNA분석을 활용하여 물류 네트워크, 무역 네트워크, 그리고 해상 네트워크 등 활발한 네트워크 관련 연구를 진행해 왔다. 그러나, 기존의 SNA분석에 비해 물류 및 무역과 관련된 SNA 응집성 분석은 미비한 편이다. 따라서, 본 연구는 SNA 응집성 분석기법 중 핵심집단 분석과 커뮤니티 분석을 활용하여 지역, 항만, 공항을 포함한 모든 국내 수출입 물류 네트워크의 시계열적인 구조변화 양상에 대해 파악하고자 한다. 이를 위해 본 연구에서는 2004년부터 2022년까지의 관세청 수출입물류통계연보 자료를 활용하였다. 본 연구의 결과는 다음과 같다. 핵심집단과 커뮤니티 분석 결과, 국내 수출입 물류 네트워크 응집성은 지속적으로 강화되고 있었으며 지역, 항만, 공항의 결속구조가 높아지고 동질적 형태가 증가하고 있음을 확인하였다. 또한, 부산항이 주요 커뮤니티의 중심인 것을 확인하였다. 이를 통해 글로벌 물류환경의 과정을 이해하고, 물류 및 무역 관련 정책과 지속 가능한 수출입 물류 프로세스를 구축하는데 도움이 될 것으로 기대된다.
창업과 관련된 연구는 비교적 활발하게 이루어지고 있는 편이다. 본 연구에서는 비교적 연구가 적은 청년을 대상으로 한 창업과 관련하여 창업의도에 미치는 영향에 대해 실증 분석을 하였다. 특히 창업 멘토링의 역할에 대해 규명하고자 했다. 이를 위해 전국의 청년을 대상으로 설문조사를 하였고 이중 유효한 250부를 구조방정식 검정하였다. 실증분석 결과는 다음과 같다. 직무스트레스, 주관적 규범, 지각된 행동통제는 청년 창업의도에 유의한 정(+)의 영향을 미쳤다. 기술적 제약은 청년 창업의도에 유의한 부(-)의 영향을 미쳤다. 반면 미래불확실성과 실패부담감은 유의성이 검정되지 않았다. 청년 창업의도에 미치는 영향력의 크기는 지각된 행동통제, 직무스트레스, 기술적 제약, 주관적 규범 순이었다. 창업 멘토링을 받지 않은 집단이 창업 멘토링을 받은 집단보다 직무스트레스, 주관적 규범, 기술적 제약이 창업의도에 미치는 영향이 큰 것으로 나타났다. 본 연구 결과는 학술적으로는 PPM(Push-Pull-Mooring)과 TPB(Theory of Planned Behavior)를 결합한 모형의 창업분야 연구의 유용성을 검정한 것이며, 실무적으로는 창업 멘토링은 청년 창업의도에 미치는 부정적인 요소의 영향력을 감소시키는 효과가 있는 것을 밝혔다는데 의의가 있었다.
The structures of the intact synaptosomal plasma membrane vesicles (SPMVs) isolated from bovine cerebral cortexs, and the outer and the inner monolayer separately, were evaluated with 1,6-diphenyl-1,3,5-hexatriene (DPH) and 1,3-di(1-pyrenyl)propane (Py-3-Py) as fluorescent reporters and trinitrophenyl groups as quenching agents. The methanol increased bulk rotational and lateral mobilities of SPMVs lipid bilayers. The methanol increased the rotational and lateral mobilities of the outer monolayers more than of the inner monolayers. n-(9-Anthroyloxy)stearic acid (n-AS) were used to evaluate the effect of the methanol on the rotational mobility at the 16, 12, 9, 6, and 2 position of aliphatic chains present in phospholipids of the SPMVs outer monolayers. The methanol decreased the anisotropy of the 16-(9-anthroyloxy)palmitic acid (16-AP), 12-(9-anthroyloxy)stearic acid (12-AS), 9-(9-anthroyloxy)stearic acid (9-AS), and 6-(9-anthroyloxy)stearic acid (6-AS) in the SPMVs outer monolayer but it increased the anisotropy of 2-(9-anthroyloxy)stearic acid (2-AS) in the monolayers. The magnitude of the increased rotational mobility by the methanol was in the order at the position of 16, 12, 9, and 6 of aliphatic chains in phospholipids of the outer monolayers. Furthermore, the methanol increased annular lipid fluidity and also caused membrane proteins to cluster. The important finding is that was far greater increase by methanol in annular lipid fluidity than increase in lateral and rotational mobilities by the methanol. Methanol alters the stereo or dynamics of the proteins in the lipid bilayers by combining with lipids, especially with the annular lipids. In conclusion, the present data suggest that methanol, in additions to its direct interaction with proteins, concurrently interacts with membrane lipids, fluidizing the membrane, and thus inducing conformational changes of proteins known to be intimately associated with membranes lipids.
하천에서 유사의 이동 및 퇴적으로 형성된 모래톱은 특이한 생물의 서식과 심미적 경관 측면에서 중요한 서식처이다. 본 연구는 보 상류에서 수문 개방에 의하여 노출된 모래톱에서 초기 식생의 발달과 그 분포를 확인하여 시간 경과에 따른 식생변화 과정을 파악하고자 하였다. 보 수문 개방 시기가 다른 금강의 3개 보 개방 구간과 보 운영에 영향을 받지 않는 대조 구간에서 보 개방 후 노출된 모래톱에서 식물군집 구조와 공간 분포의 변화를 파악하고 모래톱의 노출 기간에 따른 식물 군집 구조의 변화를 조사하였다. 금강의 보 상류구간에서 수문 개방으로 기존 홍수터 면적의 33% 이상의 면적에 해당하는 모래톱이 새롭게 형성되었다. 노출된 모래톱에는 1년생 중생식물, 다년생 수생식물, 다년생 습생식물, 아교목, 교목 군집에 속하는 9개 식물군집이 분포하였다. 모래톱의 노출 기간이 길어 짐에 따라서 나지 모래톱, 1년생 초본식물, 다년생 수생식물 군집의 면적은 감소하였고, 다년생 습생식물, 아교목, 교목 군집의 면적은 증가하였다. 하천 모래톱에서 시간 경과에 따른 식생의 변화는 수위 하강 전 수중 서식처의 조건과 물 흐름에 의한 물리적 교란의 정도에 따라서 3가지 천이 유형으로 구분할 수 있었다. 즉 모래톱의 천이과정은 1) 수생식물로부터 시작하는 '정수지 천이', 2) 일년생 습생 초본식물로부터 시작하는 '유수지 천이', 3) 버드나무류로 시작하는 '버드나무류 천이'로 구분할 수 있었다. 따라서 금강의 보 구간에서 하천 서식처 및 경관의 변화를 체계적으로 관리하기 위하여 모래톱에서의 식생 천이계열을 반영하여야 할 것으로 판단된다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70