• Structural Engineering and Mechanics
• /
• 제63권5호
• /
• pp.617-628
• /
• 2017

In order to study the failure mode and seismic behavior of the interior-joint in steel traditional-style buildings, a single beam-column joint and a double beam-column joint were produced according to the relevant building criterion of ancient architectural buildings and the engineering instances, and the dynamic horizontal loading test was conducted by controlling the displacement of the column top and the peak acceleration of the actuator. The failure process of the specimens was observed, the bearing capacity, ductility, energy dissipation capacity, strength and stiffness degradation of the specimens were analyzed by the load-displacement hysteresis curve and backbone curve. The results show that the beam end plastic hinge area deformed obviously during the loading process, and tearing fracture of the base metal at top and bottom flange of beam occurred. The hysteresis curves of the specimens are both spindle-shaped and plump. The ultimate loads of the single beam-column joint and double beam-column joint are 48.65 kN and 70.60 kN respectively, and the equivalent viscous damping coefficients are more than 0.2 when destroyed, which shows the two specimens have great energy dissipation capacity. In addition, the stiffness, bearing capacity and energy dissipation capacity of the double beam-column joint are significantly better than that of the single beam-column joint. The ductility coefficients of the single beam-column joint and double beam-column joint are 1.81 and 1.92, respectively. The cracks grow fast when subjected to dynamic loading, and the strength and stiffness degradation is also degenerated quickly.

• Steel and Composite Structures
• /
• 제28권2호
• /
• pp.223-231
• /
• 2018

Nowadays, there are a great number of various structures that have been retrofitted by using different FRP Composites. Due to this, more researches need to be conducted to know more the characteristics of these structures, not only that but also a comparison among them before and after the retrofitting is needed. In this research, a model steel structure is tested using a bench-scale earthquake simulator on the shake table, using recorded micro tremor data, in order to get the dynamic behaviors. Columns of the model steel structure are then retrofitted by using GFRP composite, and then tested on the Quanser shake table by using the recorded micro tremor data. At this stage, it is needed to evaluate the dynamic behaviors of the retrofitted model steel structure. Various types of methods of OMA, such as EFDD, SSI, etc. are used to take action in the ambient responses. Having a purpose to learn more about the effects of GFRP composite, experimental model analysis of both types (retrofitted and no-retrofitted models) is conducted to evaluate their dynamic behaviors. There is a provision of ambient excitation to the shake table by using recorded micro tremor ambient vibration data on ground level. Furthermore, the Enhanced Frequency Domain Decomposition is used through output-only modal identification. At the end of this study, moderate correlation is obtained between mode shapes, periods and damping ratios. The aim of this research is to show and determine the effects of GFRP Composite implementation on structural responses of the model steel structure, in terms of changing its dynamical behaviors. The frequencies for model steel structure and the retrofitted model steel structure are shown to be 33.916% in average difference. Finally, it is shown that, in order to evaluate the period and rigidity of retrofitted structures, OMA might be used.

• Structural Engineering and Mechanics
• /
• 제74권1호
• /
• pp.1-18
• /
• 2020

For the large deformation of shear walls under vertical and horizontal loads, there are difficulties in obtaining accurate simulation results using the response analysis method, even with fine mesh elements. Furthermore, concrete material nonlinearity, stiffness degradation, concrete cracking and crushing, and steel bar damage may occur during the large deformation of reinforced concrete (RC) shear walls. Matrix operations that are involved in nonlinear analysis using the traditional finite-element method (FEM) may also result in flaws, and may thus lead to serious errors. To solve these problems, a planar four-node element was developed based on vector mechanics. Owing to particle-based formulation along the path element, the method does not require repeated constructions of a global stiffness matrix for the nonlinear behavior of the structure. The nonlinear concrete constitutive model and bilinear steel material model are integrated with the developed element, to ensure that large deformation and damage behavior can be addressed. For verification, simulation analyses were performed to obtain experimental results on an RC shear wall subjected to a monotonically increasing lateral load with a constant vertical load. To appropriately evaluate the parameters, investigations were conducted on the loading speed, meshing dimension, and the damping factor, because vector mechanics is based on the equation of motion. The static problem was then verified to obtain a stable solution by employing a balanced equation of motion. Using the parameters obtained, the simulated pushover response, including the bearing capacity, deformation ability, curvature development, and energy dissipation, were found to be in accordance with the experimental observation. This study demonstrated the potential of the developed planar element for simulating the entire process of large deformation and damage behavior in RC shear walls.

• 한국음향학회지
• /
• 제16권2호
• /
• pp.10-15
• /
• 1997

수중 청음기는 진동하는 물체 위에 설치되어 다양한 외부 잡음 원이 유입되는 환경에 노출되어 있다. 외부 잡음 원으로는 수중 청음기가 설치된 구조물 자체의 진동, 프로펠러 잡음, 그리고 유동 유기 잡음들이 있고, 이들 외부 잡음원은 실제 강도가 상당히 높아서 센서의 정확한 작동에 장애가 되고 있다. 본 연구에서는 외부 잡음에 무관한 고 정밀도, 저 잡음 특성을 갖는 수중 청음기를 개발하기 위하여 유한 요소법(FEM)을 사용하여 잡음 전달 특성의 분석 및 air pocket과 음향 감쇠층의 다양한 조합으로 이루어진 개선된 구조의 수중 청음기를 설계하고, 내 잡음성 평가를 하였다. 그 결과 센서 측면 하단부에 잡음 원이 위치할 경우 가장 큰 잡음 신호로 작용하므로 구조를 변경한 결과 기존 수중 청음기에 비해 59% 이상 내 잡음성을 증진 시켰다.

• 토지주택연구
• /
• 제2권4호
• /
• pp.387-395
• /
• 2011

국내 건축구조물의 내진설계기준에 의하면 현장탄성파시험으로 전단파속도를 측정하여 지반을 5종으로 분류하고 이에 의해 건축물에 작용하는 지진하중을 산정하고 있으나 공정상 성토지반에 대해서는 현장탄성파시험을 할 수 없다. 이에 실내에서 간편하게 현장의 상황을 고려하여 전단파속도를 추정할 수 있는 방법을 찾고자 공진주/비틂전단시험과 각종 현장 탄성파 시험결과를 비교 분석하였다. 분석결과 성토체의 구속압을 적절히 고려할 경우 현장탄성파 시험결과와 매우 유사한 결과를 얻을 수 있었다. 또한, 공진주/비틂전단시험에 의해 최대 전단탄성계수와 구속압의 영향평가를 실시한 결과 n값이 0.434~0.561의 일반적 범위의 값을 나타내어 공진주/비틂전단시험으로도 현장지반 전단탄성계수를 유용하게 추정할 수 있는 것으로 나타났다.

• 비파괴검사학회지
• /
• 제27권4호
• /
• pp.291-298
• /
• 2007

본 논문은 단자유도 동적 센서 시스템의 동적 구간을 조절할 수 있는 새로운 신호 처리법을 소개한다. 또한 본 논문에서는 무아래 현상을 응용한 신개념의 광섬유 가속도계를 사용하여 신호 처리법을 검증하였다. 신개념의 광섬유 가속도계는 단일 질량, 단일 탄성자 그리고 단일 감쇠자로 이루어진 단자유도 동적 시스템으로서 동적 구간이 작아 이출 증가시키기 위해서는 질량이나 탄성자 상수를 조절하는 등의 기계적 조절이 필요하다. 그러나 본 논문에서 제안한 신호처리 방법을 적용한다면 센서를 다시 제작하지 않고도 동적 구간을 쉽게 조절할 수 있게 된다. 본 논문에서는 여러 모의실험과 실제 실험을 통해 본 신호 처리 알고리즘의 성능을 검증하였으며 결과적으로 이러한 신호처리 알고리즘이 광섬유 가속도계의 동적 구간을 손쉽게 조절할 수 있는 효과적인 방법임을 보여주었다.

• 한국항공우주학회지
• /
• 제47권10호
• /
• pp.705-711
• /
• 2019

전개형 반사판 안테나의 전개거동 특성을 해석적 그리고 실험적 방법으로 분석하고자 한다. Kane 방정식을 이용하여 전개형 안테나의 다물체 운동방정식을 공식화하였다. 복합재료 반사판의 구조변형 특성을 살펴보기 위해 FSDT(First-order Shear Deformation Theory)를 이용하여 빔 모델로 유한요소 정식화 하였다. 역진자 모델을 이용하여 안테나 전개시간에 따른 스프링 상수 그리고 댐핑 계수들을 결정하였다. 다물체 동력학 해석을 통하여 설계변수에 따른 안테나 반사판의 동적구조 특성을 확인하였고, 무중력 모사 전개실험을 통하여 해석결과 검증 및 거동특성을 실험적으로 관찰하였다.

• Earthquakes and Structures
• /
• 제3권3_4호
• /
• pp.581-609
• /
• 2012

In this paper a novel non-iterative approach is proposed to address the problem of deriving non-stationary stochastic processes which are compatible in the mean sense with a given (target) response (uniform hazard) spectrum (UHS) as commonly desired in the aseismic structural design regulated by contemporary codes of practice. This is accomplished by solving a standard over-determined minimization problem in conjunction with appropriate median peak factors. These factors are determined by a plethora of reported new Monte Carlo studies which on their own possess considerable stochastic dynamics merit. In the proposed approach, generation and treatment of samples of the processes individually on a deterministic basis is not required as is the case with the various approaches found in the literature addressing the herein considered task. The applicability and usefulness of the approach is demonstrated by furnishing extensive numerical data associated with the elastic design UHS of the current European (EC8) and the Chinese (GB 50011) aseismic code provisions. Purposely, simple and thus attractive from a practical viewpoint, uniformly modulated processes assuming either the Kanai-Tajimi (K-T) or the Clough-Penzien (C-P) spectral form are employed. The Monte Carlo studies yield damping and duration dependent median peak factor spectra, given in a polynomial form, associated with the first passage problem for UHS compatible K-T and C-P uniformly modulated stochastic processes. Hopefully, the herein derived stochastic processes and median peak factor spectra can be used to facilitate the aseismic design of structures regulated by contemporary code provisions in a Monte Carlo simulation-based or stochastic dynamics-based context of analysis.

• 대한조선학회논문집
• /
• 제38권3호
• /
• pp.41-46
• /
• 2001

최근에 선박이 대형화되는 추세에 힘입어 조선소는 광폭천흘수선, 초대형 원유운반선 및 초대형 컨테이너선 등을 건조하고 있다. 이와 같은 선박은 상대적으로 다른 선박에 비해 강성이 작기 때문에 파랑 중에서 유탄성 운동을 하게 되고, 입사하는 파고가 작은 경우에도 선체의 2절 모드의 진동에 의해 선체의 갑판이 피로 파괴되는 경우가 종종 발생하는 것으로 알려져 있다. 본 논문에서 전진하는 선박의 유체 압력을 계산하기 위해 적분방정식은 3차원 소오스 분포법을 사용하고, 그린함수는 전진하면서 동요하는 형태를 이용하였다. 방사문제는 선박을 여러 개의 단면으로 나누어 단면간의 간섭효과를 고려하여 heave 및 pitch 강제동요와 관련된 부가질량 및 조파 감쇠계수를 계산하였고, 파강제력은 각 단면에서 선행해에 의한 힘만 고려하였다. 선박의 각 단면의 수직운동은 선박에 대한 운동방정식을 이용하고 강성행렬은 오일러 보 이론에 의해 산정되었다. 계산은 Esso-Osaka 선박을 모델로 도입하여 입사하는 파도의 주파수가 변함에 따른 선박의 각 단면에 대한 운동, 굽힘 모우멘트를 계산하였다.

• Earthquakes and Structures
• /
• 제4권6호
• /
• pp.587-606
• /
• 2013

The given paper presents a new approach in design of seismic isolation systems of base isolated buildings. The idea is to install not one big size rubber bearing under the columns and/or shear walls, or one by one with certain spacing under the load-bearing walls, but to install a group/cluster of small size bearings, in order to increase the overall effectiveness of the isolation system. The advantages of this approach are listed and illustrated by the examples. Also the results of analyses of some buildings where the approach on installation of clusters of rubber bearings was used in their isolation systems are given for two cases: i) when the analyses are carried out based on the provisions of the Armenian Seismic Code, and ii) when the time history analyses are carried out. Obtained results are compared and discussed. Paper also presents, as an example, detailed analysis and design of the 18-story unique building in one of the residential complexes in Yerevan. Earthquake response analyses of this building were carried out in two versions, i.e. when the building is base isolated and when it is fixed base. Several time histories were used in the analyses. Comparison of the obtained results indicates the high effectiveness of the proposed structural concepts of isolation systems and the need for further improvement of the Seismic Code provisions regarding the values of the reduction factors. A separate section in the paper dedicated to the design of high damping laminated rubber-steel bearings and to results of their tests.