• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.20 no.5
• /
• pp.431-440
• /
• 1987

In order to develop a new type of food source for the effective utilization of fish protein, plastein reaction was applied to improve the functional properties of filefish protein. Plasteins were synthesized from a peptic filefish protein hydrolysate by papain, pepsin, $\alpha-chymotrypsin$ and protease(from Streptomyces griceus) under the optimum conditions of previous paper). Also, L-glutamic acid diethylester and L-leucine ethylester were incorporated into plastein during the plastein reaction by papain. And, General composition, yield, molecular weight, amino acid composition, color and IR spectrum of plasteins were measured. The protein, ash and lipid content of the plasteins were $72\~78\%,\;7.4\~11.8\%\;and\;0.3\~0.9\%$ respectively. The yield of plasteins were papain $55.0\%,\;pepsin\;47.6\%,\;\alpha-chymotrypsin\;38.3\%,\;protease\;23.6\%$, glutamic acid-incorporated plastein (Glu-Plastein) $35.0\%$, and leucine-incorporated plastein (Leu-plastein) $45.7\%$. The glutamic acid and leucine content in Glu-plastein and Leu-plastein were $38.7\%,\;41,7\%$, respectively, while the contents in the peptic filefish protein hydrolysate were $16.01\%\;and\;8.16\%$, respectively. The amino acid compositions were similar to that of the original filefish muscle protein. The major molecular weights of the peptic hydrolysate estimated by gel filteration were 2,000 and 310, and those of plasteihs were 21,000 and 4,900 for papain, 24,000 for pepsin, 18,500 for $\alpha-chymotrypsin$ 6,700 for protease, 24,000 for Glu-plastein and 17,000 for Leu-plastein. The structural changes in freeze-dried filefish meat, the FPC and hydrolysate were not observed on the IR spectrum. But plasteins showed amide I band in $1,600\~l,700cm^{-1}$ range and resulted in a strong band in $800\~850\;cm^{-1},\;700\~750\;cm^{-1}\;and\;650\~700\;cm^{-1}$. The amide I band of Glu-plastein was wider than those of other plasteins and had also a small band at $1,440\;cm^{-1}$.

• Applied Microscopy
• /
• v.25 no.4
• /
• pp.83-103
• /
• 1995

This experiment was carried out to investigate the effects of telluric acid on the histological and fine structural changes in the rat liver. Fischer 344 rats($150{\sim}200gm$) were used in this study as control and experimental groups. Telluric acid(5 mg/100 gm of body weight) suspensed in olive oil was given intraperitoneally to the animals of the experimental group and only olive oil to those of the control group. At the intervals of 3, 6 and 12 hours, 1, 2, 3, 5, 10, 20, 30 and 60 days after administration, the animals were sacrificed, and livers were obtained from the rats. For light microscopic examination of the liver, sections($5{\mu}m$) were stained with hematoxylineosin(H-E). For electron microscopic examination of the liver, sections were stained with uranyl acetate and lead citrate, finally examined with Zeiss EM 109 electron microscopes. The results obtained were as follows. 1. In the control group, round nucleus. well developed mitochondria, Golgi apparatus, rough endoplasmic reticulum(RER) and numerous glycogen particles were observed in the cytoplasm of the hepatocyte. In the cytoplasmic membranes of the hepatocyte, sinusoidal surface had numerous microvilli and cellular surface is combinated adjacent hepatocyte with desmosomes. The RER cisterns were dilated and zymogen granules were fewer than those of the dark cells. Kupffer cells with irregular nuclear membrane were observed. Fat storing cell and collagenous fiber bundle were observed in the Disse space. 2. Kupffer cell, inflammatory cells in the connective tissue of hepatic triad and lysosome were increased in the 3, 6, and 12 hour experimental group comparing with that of the control group. 3. In the 1 day experimental group, infiltration of inflammatory cells in interlobular connective tissue, dilatation of sinusoidal capillary and increasing of Kupffer cell were observed. Atropic change of hepatocyte and aggregation of glycogen particles in the cytoplasm of hepatocyte were observed. In this group, desmosome near bile canaliculi and collagenous fiber bundle in the Disse space were increased comparing with that of the 12 hours experimental group. In the 2 days experimental group, desmosome, lysosome, peroxisome and collagenous fiber bundle were increased comparing with that of the 1 day experimental group. Furthermore, lamellated bodies were also seen in the cytoplasm of the hepatocyte. 4. In 3 and 5 days experimental groups, transformations of hepatic cell cord and degeneration of the hepatocyte were markedly inclosed comparing with the all experimental groups. And damaged RER and mitochondria. collagenous fiber bundle were also inclosed comparing with that of the 2 days experimental group. Autophagosome and fat storing cells with large lipid droplets were also observed comparing with that of the 2 days experimental group. Tight junction and desmosome between the hepatocytes were separated. These degenerating changes were severe through the all experimental groups. 5. In the 10 and 20 days experimental groups, arrangement of hepatic cell cords and cell organelles of hepatocytes were similar to those of the control group. However, aggregation of glycogen particles, dilatation of sinusoidal capillary and infiltration of inflammatory cells remained. 6. In the 30 days experimental group, the tissue findings were similar to those of the control grout. But lamellated bodies in some hepatocytes and lysosome were remained in the cytoplasms of the Kupffer cells. In the 60 days experimental group, these all changes were recovered as the control group. In conclusion, telluric acid would directly induce the degenerative and necrotic changes on the hepatic tissue. However, these changes were perfectly recoverd in the 60 days experimental group as the control group.

• Korean Journal of Food Science and Technology
• /
• v.45 no.4
• /
• pp.428-433
• /
• 2013

Heterogenous samples of locust bean gum (galactomannan) were prepared into homogeneous substances. Locust bean gum was fractioned using ammonium sulfate (14.11-23.08%, w/w). The intrinsic viscosity was obtained by extrapolating reduced viscosity versus concentration by using an Ubbelohde viscometer. The ranges of intrinsic viscosity for fractions that not included protein (F3-F6) and fractions that included protein (F1-F2) were 9.89-8.10 and 8.44-4.59, respectively. Values for Huggins' coefficient (k'), which depends on physical interactions, were 0.46-0.78. Increasing ammonium sulfate concentration was associated with a weak trend towards lower molecular weight and intrinsic viscosity by size-exclusion chromatography (SEC): $M_w$ ranged from 674 to 617 kg/mol and [${\eta}$] from 9.80 to 8.10 dL/g between F3 and F6. The evaluations of those fractions by using SEC and the Ubbelohde viscometer produced very similar values, as predicted. We verified the application of a gradient of ammonium sulfate to precipitate locust bean gum into fractions of different molecular size and show structural variations.

• Journal of Distribution Science
• /
• v.10 no.4
• /
• pp.37-45
• /
• 2012

The popularity of courier services in Korea has made it an essential part of the country's domestic logistics industry, bolstering the growth not only of the national economy, but also the quality of people's daily lives. An effective strategy for courier companies in Korea would be to provide high-quality services to their existing target markets with the goal of maximizing customer loyalty. This study investigates structural relationships between customer loyalty and service quality as a set of factors and between customer trust and customer satisfaction. These antecedent relationships will be used to understand the "performance formation model" through service quality. In this study, service quality, as a set of factors, is considered to be the independent variable, while customer satisfaction and customer trust are both treated as intervening variables. Finally, customer loyalty is the dependent variable. Following a review of the literature, this paper's proffered hypothesis will be investigated in terms of whether the independent and intervening variables significantly affect customer loyalty. A statistical analysis of the empirical research was carried out using both SPSS 18.0 and AMOS 18.0 The results of this study's empirical analysis show three conclusions. First, among the intervening variables (customer satisfaction and customer trust), customer satisfaction is significantly correlated with customer loyalty. Customer trust, however, was shown to have little or no relationship to customer loyalty. Second, the quality of service variable seems to influence customer satisfaction, customer trust, and customer loyalty. Third, with respect to the relationship of intervening variables, customer trust affects customer satisfaction. Thus, the companies that have a competitive advantage in Korea have successfully maximized customer loyalty for their existing customers. Courier companies will need to research and study customer needs. Therefore, this research suggests that effective courier service management can be better understood through the application of the service quality performance formation model, which can enhance the quality of service provided by domestic courier services. This research is limited to investigating qualitative variables, such as the service quality factors, customer satisfaction, and customer trust. It would be helpful for future research on courier services to consider quantitative variables, such as price and weight.

• The Journal of the Korean bone and joint tumor society
• /
• v.20 no.2
• /
• pp.74-79
• /
• 2014

Purpose: Fibrous dysplasia is related to the mutation of gene encoding the alpha-subunit of a signal-transducing G-protein and has variable clinical course. Operation can be performed to prevent functional disorder or structural deformity. After curettage, autologous bone graft were used to fill the defects after curettage. The aim of this study is to compare the result of autogenous cancellous bone grafting and allogenic bone grafting for fibrous dysplasia. Materials and Methods: Among the patients who visit our hospital during the period of April, 1997 to October, 2013, we selected 34 patients who diagnosed fibrous dysplasia and visited our clinic over 1 year. There were 13 males and 21 females. Average age was 26.4 (range 2 to 57) years old. Autogenous bone graft (group I) in 5 cases, Non-autogenous bone graft (group II) in 30 cases. Iliac bone is used in all cases of autogenous bone graft. There were no significant difference in age, follow-up period, preoperational laboratory finding between two groups. Radiographic image was done to evaluate the recurrence of fibrous dysplasia or secondary degeneration. Results: There were four cases in recurrence (group I: 1 case, group II: 3 cases, p=0.554). In all recurrent cases, reoperations were done using curettage and autogenous iliac bone graft. There was no re-recurrence after reoperation. One case of secondary aneurysmal bone cyst was confirmed (group II) and 1 cases of pathologic fractures had developed (group I: 0 case, group II: 1 cases, p=0.559). No malignant change occurred. Conclusion: There were no significant difference between autogenous bone graft group and non-autogenous bone graft group. Our result suggested that autogenous bone graft seems to be good method to treat fibrous dysplasia, in the case of small volume of tumor lesion or non-weight bearing portion.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.6
• /
• pp.1253-1259
• /
• 2001

The purpose of this study was to investigate the effects of green tea catechin on change of bone tissue in long-term cadmium treated rats. Sprague-Dawley male rats weighing 100$\pm$10 g were randomly assigned to one normal group and three cadmium treated groups. Cadmium groups were classified to catechin free diet group (Cd-0C group), 0.25% catechin diet group (Cd-0.25C group) and 0.5% catechin diet group (Cd-0.5C group) according to the levels of catechin supplement. Animals were raised for 20 weeks. Cadmium were supplied as drinking water of 50 ppm Cd$^{2+}$. Effects of catechin were analyzed on changes of bony tissue in long-term cadmium treated rats by determining the accumulated cadmium in bone and bone mineral density and micro- photographs of bony tissue. The cadmium accumulation of tibia and femur were higher in Cd-treated groups than in normal group, but they was lowered by catechin supplementation. The bone mineral density (BMD) of tibia and femur in Cd-0C group was significantly lower than in normal group, but it of catechin supplemetation group was similar to normal group. Microphological changers were appeared under a light microscope and an electro microscope reveal no structural changes in bony spicules, marrow cell distribution and cellular morphology in all groups. The bone weight and length tend to decrease in Cd-0C groups. Catechin supplementation in long-term cadmium treated rats depressed the cadmium accumulation in bony tissue that led to improve the bone mineral density in tibia and femur.r.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.3
• /
• pp.407-417
• /
• 1999

Objective: Mammalian follicle cells are the most important somatic cells which help oocytes grow, mature and ovulate and thus are believed to provide oocytes with various functional and structural components. In the present study we have examined whether cumulus or granulosa cells might playa role in establishing the plasma membrane structure of mouse oocytes during meiotic maturation. Design: In particular the differential resistances of mouse oocytes against chymotrypsin treatment were examined following culture with or without cumulus or granulosa cells, or in these cell-conditioned media. Results: When mouse denuded oocytes, freed from their surrounding cumulus cells, were cultured in vitro for $17{\sim}18hr$ and then treated with 1% chymotrypsin, half of the oocytes underwent degeneration within 37.5 min ($t_{50}=37.5{\pm}7.5min$) after the treatment. In contrast cumulus-enclosed oocytes showed $t_{50}=207.0$. Similarly, when oocytes were co-cultured with cumulus cells which were not associated with the oocytes but present in the same medium, the $t_{50}$ of co-cultured oocytes was $177.5{\pm}13.1min$. Furthermore, when oocytes were cultured in the cumulus cell-conditioned medium, $t_{50}$ of these oocytes was $190.0{\pm}10.8min$ whereas $t_{50}$ of the oocytes cultured in M16 alone was $25.5{\pm}2.9min$. Granulosa cell-conditioned medium also increased the resistance of oocytes against chymotrypsin treatment such that $t_{50}$ of oocytes cultured in granulosa cell-conditioned medium was $152.5{\pm}19.0min$ while that of oocytes cultured in M16 alone was $70.0{\pm}8.2min$. To see what molecular components of follicle cell-conditioned medium are involved in the above effects, the granulosa cell-conditioned medium was separated into two fractions by using Microcon-10 membrane filter having a 10 kDa cut-off range. When denuded oocytes were cultured in medium containing the retentate, $t_{50}$ of the oocytes was $70.0{\pm}10.5min$. In contrast, $t_{50}$ of the denuded oocytes cultured in medium containing the filtrate was $142.0{\pm}26.5min$. $T_{50}$ of denuded oocytes cultured in medium containing both retentate and filtrate was $188.0{\pm}13.6min$. However, $t_{50}$ of denuded oocytes cultured in M16 alone was $70.0{\pm}11.0min$ and that of oocytes cultured in whole granulosa cell-conditioned medium was $156.0{\pm}27.9min$. When surface membrane proteins of oocytes were electrophoretically analyzed, no difference was found between the protein profiles of oocytes cultured in M16 alone and of those cultured in the filtrate. Conclusions: Based upon these results, it is concluded that mouse follicle cells secrete a factor(s) which enhance the resistance of mouse oocytes against a proteolytic enzyme treatment. The factor appears to be a small molecules having a molecular weight less than 10 kDa.

• Composites Research
• /
• v.34 no.3
• /
• pp.192-198
• /
• 2021

Due to enormous market growing of electric vehicles without combustion engine, reducing unwanted BSR (buzz, squeak, and rattle) noise is highly demanded for vehicle quality and performance. Particularly, innerbelt weatherstrips which not only block wind noise, rain, and dust from outside, but also reduce noise and vibration of door glass and vehicle are required to exhibit high damping properties for improved BSR performance of the vehicle. Thermoplastic elastomers (TPEs), which can be recycled and have lighter weight than thermoset elastomers, are receiving much attention for weatherstrip material, but TPEs exhibit low material damping and compression set causing frictional noise and vibration between the door glass and the weatherstrip. In this study, high damping EPDM (ethylene-propylene-diene monomer)/PP (polypropylene) thermoplastic vulcanizates (TPV) were investigated by varying EPDM/PP ratio and ENB (ethylidene norbornene) fraction in EPDM. Viscoelastic properties of TPV materials were characterized by assuming that the material damping is directly related to the viscoelasticity. The optimum material damping factor (tanδ peak 0.611) was achieved with low PP ratio (14 wt%) and high ENB fraction (8.9 wt%), which was increased by 140% compared to the reference (tanδ 0.254). The improved damping is believed due to high fraction of flexible EPDM chains and higher interfacial slippage area of EPDM particles generated by increasing ENB fraction in EPDM. The stick-slip test was conducted to characterize frictional noise and vibration of the TPV weatherstrip. With improved TPV material damping, the acceleration peak of frictional vibration decreased by about 57.9%. This finding can not only improve BSR performance of electric vehicles by designing material damping of weatherstrips but also contribute to various structural applications such as urban air mobility or aircrafts, which require lightweight and high damping properties.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.4
• /
• pp.91-103
• /
• 2009

Slope failure depends upon the climatic features related to related rainfall, structural geology and geomorphological features as well as the variation of the mechanical behaviors of soil constituting a slope. In this paper, among many variables, effects of soil layer thickness on the slope failure process, and variations of matric suction and volumetric water content were observed. When the soil layer is relatively thick, the descending wetting front decreases matric suction and the observed matric suction reaches to "0" value. When the wetting front reaches to the impermeable boundary, the bottom surface of steel soil box, ascending wetting front was observed. This observation can be postulated to be the effects of various sizes of pores. When macro size pores exist, the capillary effects can be reduced and infilling of pore will be limited. The partially filled pores would be filled with water during the ascending of the wetting front, which bounces from the impermeable boundary. This assumption has been assured from the observation of variation of the volumetric water contents at different depth. When the soil layer is thick (thickness = 20 cm), for granular material, erosion is a cause triggering the slope failure. It has been found that the initiation of erosion occurs when the top soil is fully saturated. Meanwhile, when the soil layer is shallow (thickness = 10 cm), slope slides as en mass. The slope failure for this condition occurs when the wetting front reaches to the interface between the soil layer and steel soil box. As the wetting front approaches to the bottom of soil layer, reduction of shear resistance along the boundary and increase of the unit weight due to the infiltration occur and these produce complex effects on the slope failure processes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.407-415
• /
• 2010

In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.