• Structural Engineering and Mechanics
• /
• 제17권6호
• /
• pp.829-862
• /
• 2004

This paper presents a method for the nonlinear analysis of beam elements subjected to the cyclical combined actions of torsion, biaxial flexure and axial forces based on an extension of the disturbed compression field (DSFM). The theoretical model is based on a hybrid formulation between the full rotation of the cracks model and the fixed direction of the cracking model. The described formulation, which treats cracked concrete as an orthotropic material, includes a new approach for the evaluation of the re-orientation of both the compression field and the deformation field by removing the restriction of their coincidence. A new equation of congruence permits evaluating the deformation of the middle line. The problem consists in the solution of coupled nonlinear simultaneous equations expressing equilibrium, congruence and the constitutive laws. The proposed method makes it possible to determine the deformations of the beam element according to the external stresses applied.

• Structural Engineering and Mechanics
• /
• 제34권2호
• /
• pp.189-211
• /
• 2010

The behaviour of a reinforced concrete tension member is governed by the contribution of concrete between cracks, tension stiffening effect. Under highly repeated loading, this contribution is progressively reduced and the member response approximates that given by the fully cracked member. When focusing on the unloaded state, experiments show deformations larger than those of the naked reinforcement. This has been referred to as negative tension stiffening and is due to the fact that concrete carries compressive stresses along the crack spacing, even thought the tie is subjected to an external tensile force. In this paper a cycle-dependent approach is presented to reproduce the behaviour of the axially loaded tension member, paying attention to the negative tension stiffening contribution. The interaction of cyclic bond degradation and time-dependent effects of concrete is investigated. Finally, some practical diagrams are given to account for the negative tension stiffening effect in reinforced concrete elements.

• Structural Engineering and Mechanics
• /
• 제16권1호
• /
• pp.1-15
• /
• 2003

This paper proposes a new method for the preliminary design of cable-stayed bridges that belong to the radial system subjected to static loads (self weight, traffic loads, concentrated loads, etc). The method is based on the determination of the each time existing relation between the tension forces of the cables and the corresponding bridge-deck deformations, and can be extended on any type of cable layout (fan, parallel, or mixed system). Galerkin's method is used for the final determination of the cable stresses and the bridge deformation. The determination of the equation, which gives the forces of the cables in relation to the deck's configurations, permits us to convert the problem to the solving of a continuous beam without cables.

• Advanced Composite Materials
• /
• 제17권4호
• /
• pp.373-407
• /
• 2008

This paper will examine the possibilities of the virtual tests of composite structures by simulating mechanical behaviors by using supercomputing technologies, which have now become easily available and powerful but relatively inexpensive. We will describe mainly the applications of large-scale finite element analysis using the direct numerical simulation (DNS), which describes composite material properties considering individual constituent properties. DNS approach is based on the full microscopic concepts, which can provide detailed information about the local interaction between the constituents and micro-failure mechanisms by separate modeling of each constituent. Various composite materials such as metal matrix composites (MMCs), active fiber composites (AFCs), boron/epoxy cross-ply laminates and 3-D orthogonal woven composites are selected as verification examples of DNS. The effective elastic moduli and impact structural characteristics of the composites are determined using the DNS models. These DNS models can also give the global and local information about deformations and influences of high local in-plane and interlaminar stresses induced by transverse impact loading at a microscopic level inside the materials. Furthermore, the multi-scale models based on DNS concepts considering microscopic and macroscopic structures simultaneously are also developed and a numerical low-velocity impact simulation is performed using these multi-scale DNS models. Through these various applications of DNS models, it can be shown that the DNS approach can provide insights of various structural behaviors of composite structures.

• Structural Monitoring and Maintenance
• /
• 제7권3호
• /
• pp.233-259
• /
• 2020

Using bonded fiber-reinforced polymer laminates for strengthening wooden structural members has been shown to be an effective and economical method. In this research, properties of suitable composite materials (sika wrap), adhesives and two ways of strengthening beams exposed to bending moment are presented. Passive or slack reinforcement is one way of strengthening. The most effective way of such a strengthening was to place reinforcement laminates in the stretched part of the wooden beam (lower part in our case), in order to investigate the effectiveness of externally bonding FRP to their soffits. The model is based on equilibrium and deformations compatibility requirements in and all parts of the strengthened beam, i.e., the wooden beam, the sika wrap composite plate and the adhesive layer. The theoretical predictions are compared with other existing solutions. This research is helpful for the understanding on mechanical behaviour of the interface and design of the composite-wooden hybrid structures. The results showed that the use of the new strengthening system enhances the performance of the wooden beam when compared with the traditional strengthening system.

• 전산구조공학
• /
• 제3권3호
• /
• pp.133-140
• /
• 1990

케이블 구조물은 응력-변형도관계에서 비선형성이 강하고 대변위에 의해 기하학적 비선형이 도입되므로 해석이 복잡하다. 그러므로 케이블 구조물의 평형형태 탐색과 해석에 앞서 기하학적 비선형을 고려해야만 한다. 본 논문에서는 이러한 문제를 해결하기 위해 케이블, 네트, 전선, 현수케이블 지붕등에 적용될 수 있는 수치해석과정이 소개된다. 이 과정은 두 부분으로 나눌 수 있는데, 하나는 유연성반복과정에의해 등분포하중을 받는 케이블 구조물의 응력과 평형형태를 구하는 것이고, 다른 한 부분은 비선형 유한요소법에 의해 절점외력을 받는 평형형태를 해석하는 것이다.

• 한국전산구조공학회논문집
• /
• 제21권1호
• /
• pp.43-50
• /
• 2008

본 연구에서는 볼트의 변형을 고려한 강재 조립 합성보의 휨거동에 대한 해석기법 및 결과가 제시되었다. 볼트의 변형, 합성효과 및 접촉면의 마찰이 합성보의 휨거동에 끼치는 영향을 파악하였다. 볼트의 변형이 합성보의 휨거동에 끼치는 영향을 고려하기 위하여, 구조해석 프로그램인 ABAQUS의 Nonlinear Spring요소를 사용하였으며 볼트의 변형을 고려하지 않은 결과와 비교하였다. 유한요소 모델에 의해서 처짐, 휨응력, 전단응력이 계산되었으며 이런 결과는 완전 비합성보, 부분 합성보 및 완전 합성보의 해석 값과 비교되었다. 해석결과 합성보의 거동은 강재의 마찰보다 볼트의 갯수로 표현되는 합성률에 크게 영향을 받았다. 특히 합성률이 50%이상이 되면 볼트의 변형을 고려한 합성보의 휨거동은 완전합성보와 유사하게 나타났다.

• Steel and Composite Structures
• /
• 제12권4호
• /
• pp.291-302
• /
• 2012

Frequently, steel silos are supported by discrete supports or columns to permit easy access beneath the barrel. In such cases, large loads are transferred to the limited number of supports, causing locally high axial compressive stress concentrations in the shell wall above the supports. If not dealt with properly, these increased stresses will lead to premature failure of the silo due to local instability in the regions above the supports. Local stiffening near the supports is a way to improve the buckling resistance, as material is added in the region of elevated stresses, levelling these out to values found in uniformly supported silos. The aim of a study on the properties of local stiffening will then be to increase the failure load, governed by an interaction of plastic collapse and elastic instability, to that of a discrete supported silo. However, during the course of such a study it was found that, although the failure remains local, the cylinder height is also a parameter that influences the failure mechanism, a fact that is not properly taken into account in current design practice and codes. This paper describes the mechanism behind the effect of the cylinder height on the failure load, which is related to pre-buckling deformations of the shell structure. All results and conclusions are based on geometrically and materially non-linear finite element analyses.

• 대한기계학회논문집A
• /
• 제34권4호
• /
• pp.487-493
• /
• 2010

대부분의 구조해석 문제는 외부에서 주어진 하중에 대한 변형과 응력에 관심을 두고 있지만 많은 경우에서 표면 또는 내부에 주어진 응력이나 트랙션을 구하는 역문제 해석이 필요하게 된다. 본 연구에서는 구하고자 하는 트랙션에서 멀리 떨어진 영역의 변위를 측정하여 미지의 트랙션을 평가하는데 유한요소법을 사용한 역문제 수식화를 적용하였다. 일반적으로 역시스템의 불안정으로 인하여 측정 변위의 작은 오차는 해석 결과에 큰 영향을 주게 된다. 이와 같은 역시스템의 불안정성을 개선하기 위하여 본 연구에서는 구하고자 하는 트랙션에 가까운 단면의 변위를 Gram-Schmidt 수직화 기법을 통한 수직기저함수 사용하여 예측하고 보다 안정된 역문제를 해석하는 방법을 개발하였고 장점들을 수치 예제를 통하여 보여주었다.

• 한국전산구조공학회논문집
• /
• 제16권4호
• /
• pp.369-376
• /
• 2003

본 논문에서는 가압경수로(PWR) 고준위폐기물을 깊은 지하 500m에 처분 시 사용되는 처분용기 및 이를 보호하기 위하여 50㎝ 두께로 처분용기 주위를 감싸고 있는 벤토나이트 버퍼의 복합구조물에 지진 등의 지각 변동에 의하여 갑작스럽게 10㎝의 수평한 암반 전단력이 대칭적으로 가해졌을 때, 처분용기의 안전성(붕괴)을 예측하기 위하여 「처분용기+벤토나이트 버퍼」 복합 구조물에 대한 비선형 구조해석을 수행하였다. 복합구조물을 구성하고 있는 물질들은 탄소성체로 가정하였으며, 대변형 발생 시 항복을 예측하는 항복조건식으로는 처분용기를 구성하고 있는 금속물질(구리, 주철)에 대하여 von-Mises 항복조건식을, 벤토나이트 버퍼물질에 대하여는 Drocker-Prager 항복조건식을 적용하였다. 해석 결과들을 분석하면 비록 10㎝의 수평한 대칭 암반 전단력에 대하여 벤토나이트 버퍼에는 항복점을 훨씬 상회하는 대변형이 발생하였지만, 내부의 처분용기를 구성하고있는 주철 및 구리에는 여전히 매우 작은 탄성변형 및 항복응력보다 작은 응력이 발생하고 있음을 알 수 있었다. 따라서 갑작스런 10㎝의 수평한 암반 전단력에 대하여 50㎝ 두께의 벤토나이트 버퍼는 안전하게 내부의 처분용기를 보호하고 있음을 알 수가 있다. 해석결과는 또한 벤토나이트 버퍼의 전단변형에 의하여 처분용기에 휨변형이 발생함을 보여주고 있다.