• Journal of the Korea institute for structural maintenance and inspection
• /
• v.3 no.4
• /
• pp.163-171
• /
• 1999

In this study, we executed fundamental experiment to investigate properties of accelerated carbonation with changing chloride content of concrete used sea sand in order to examine durability. So we obtained the results of following properties of mechanics, durability, concrete with sea sand, determined concrete w/C 30%, 40%, 50%, and fine aggregate 40% and changing containing chloride 0, 0.3, 0.6, $0.9kg/m^3$ by the experiment of accelerated neutralization. The results of this study as follows: 1) As result of changing chloride content of concrete used sea sand augmented in stages $0.3kg/m^3$, accelerated carbonation was increased as increment chloride content. The increment depth was decreased as it went long term age. It was shown the chloride content effected increment of carbonation depth in concrete 2) As a result of changing W/C of concrete used sea sand augmented in stages 10% at a time from 30% to 50%, accelerated carbonation depth of concrete was increased as W/C ratio. 3) As the carbonation concrete used sea sand, compressive strength between 8 weeks and accelerated carbonation depth of 1 weeks, 2 weeks, 4 weeks, 8 weeks was inversion proportion.

• Smart Structures and Systems
• /
• v.5 no.3
• /
• pp.209-221
• /
• 2009

A control algorithm for seismic protection of building structures based on the theory of variable structural control or sliding mode control is presented. The paper focus in the design of sliding surface. A method for determining the sliding surface by pole assignment algorithm where the poles of the system in the sliding surface are obtained on-line, based on the frequency content of the incoming earthquake signal applied to the structure, is proposed. The proposed algorithm consists of the following steps: (i) On-line FFT process is applied to the incoming part of the signal and its frequency content is recognized. (ii) A transformation of the frequency content to the complex plane is performed and the desired location of poles of the controlled structure on the sliding surface is estimated. (iii) Based on the estimated poles the sliding surface is obtained. (iv) Then, the control force which will drive the response trajectory into the estimated sliding surface and force it to stay there all the subsequent time is obtained using Lyapunov stability theory. The above steps are repeated continuously for the entire duration of the incoming earthquake. The potential applications and the effectiveness of the improved control algorithm are demonstrated by numerical examples. The simulation results indicate that the response of a structure is reduced significantly compared to the response of the uncontrolled structure, while the required control demand is achievable.

• Journal of the Korea Safety Management & Science
• /
• v.26 no.2
• /
• pp.93-105
• /
• 2024

In this study, based on previous research on personal broadcasting, we indirectly measured content quality, YouTuber attributes, user satisfaction, and behavioral intention, which are latent variables that cannot be directly measured, as measurement variables, and then measured theoretically between the latent variables. In order to analyze the causal relationship, we used a structural equation model to determine to what extent the content quality of the YouTube mukbang channel and the YouTuber's attributes influence behavioral intentions such as purchase, recommendation, and continued use according to viewers' satisfaction with use. We intend to analyze and verify the relationship between related variables. The research results are as follows. First, the value, relevance, timeliness, completeness, and data quantity of content quality were found to have no significant impact on user satisfaction. Second, the trustworthiness, expertise, attractiveness, and intimacy of YouTuber attributes were found to have a significant impact on user satisfaction, but the similarity of YouTuber attributes did not have a significant impact on usage. Third, user satisfaction was found to have a significant impact on behavioral intentions and purchase intentions. However, user satisfaction was not found to have a direct significant impact on recommendation intentions or continued usage intentions.

• Korean Journal of Microbiology
• /
• v.38 no.3
• /
• pp.213-220
• /
• 2002

Inducible expression system for the three structural proteins, capsid (C), precursor membrane (prM/M), and envelop (E) of Japanese encephalitis virus (JEV) was established in BHK-21 cells. Doxycycline, a tetracycline analog, was utilized as an inducer. Transfectants BHK-21/IV (vector only), BHK-21/IC (for C), BHK-21/IP3 (for prM), and BHK-21/IE1 (for E) were selected and cloned in the presence of G4l8 or hygromycin. Transcribed mRNAs for the corresponding genes were observed after doxycycline induction. Effects by the JEV structural gene expression on the transfectants were monitored via cell growth, chromatin condensation, internucleosomal DNA fragmentation, and DNA contents analyses. Clear cell growth retardation and chromatin condensation were observed in all three transfectants while only BHK-2/IC corresponded to the induction status in the DNA fragmentation and DNA content analyses. Combined results, therefore, suggested that JEV capsid protein should be one of the direct and independent factors in apoptotic cell death induced by IEV infection.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.2
• /
• pp.46-52
• /
• 2017

Recently durability design based on deterministic or probabilistic method has been attempted since service life evaluation in RC(Reinforced Concrete) structure exposed to chloride attack is important. The deterministic durability design contains a reasonable method with time effect on surface chloride content and diffusion coefficient, however the probabilistic design procedure has no consideration of time effect on both. In the paper, a technique on PDF(Probability of Durability Failure) evaluation is proposed considering time effect on diffusion and surface chloride content through equivalent surface chloride content which has same induced chloride content within a given period and cover depth. With varying period to built-up from 10 to 30 years and maximum surface chloride content from $5.0kg/m^3$ to $10.0kg/m^3$, the changing PDF and the related service life are derived. The proposed method can be reasonably applied to actual durability design with preventing conservative design parameters and considering the same analysis conditions of the deterministic method.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.10
• /
• pp.51-61
• /
• 2018

Purpose - Korean women suffered from serious experience at unfair personnel practice in the work and coexistence between work and home affairs. The study examined woman workers' career plateau perception and success who worked for local public enterprises, that is to say, regional public corporation invested by local government, and investigated mediating effect of dual commitment as well as control effect of self-efficacy from point of view of various access to variables. Research design, data, and methodology - The study investigated women employees of regional public corporation by empirical analysis. The author collected 337 copies from 380 copies and made use of 325 copies after excluding copies with improper answer. SPSS 24.0 and AMOS 24.0 were used. Results - The study investigated effect of career plateau (structure and content) upon subjective career success (job satisfaction and career commitment) according to questionnaire material: First, not only structural plateau but also content career plateau had negative influence upon dual commitment (structure and career). Second, dual commitment had positive influence upon subjective career success from point of view of organizational commitment and career commitment. Third, structural career plateau had positive influence upon career success, and content career plateau had positive influence upon job satisfaction. Fourth, structural career plateau did not have significant influence upon job satisfaction, content career plateau and career satisfaction. Fifth, subordinate variables (organizational commitment and career commitment) had mediating influence upon career plateau cognition and subjective career success. Sixth, self efficacy did not control career plateau cognition and subjective career success. Conclusions - Women employee's career plateau cognition mediated dual commitment to have influence upon career success and to be likely to help career success theory study. Career plateau had negative influence upon dual commitment and career success of women workers. The study shall give base of counteraction from point of view of control and motivation of women workers thinking of career plateau.

• Polymer(Korea)
• /
• v.26 no.2
• /
• pp.218-226
• /
• 2002

For the preparation of high resilience polyurethane (PU) foams with polyether type cell openers which have different ethylene oxide (EO) content, molecular weight and chain structure, the influences of tell opener structure on the kinetics, rheology, structural stability, open cell content and mechanical properties of the obtained foam were investigated. It was observed that urea formation reaction was delayed with the increase of EO content and incorporation of ester linkage in cell opener molecule and was relatively independent on the molecular weight. With the rheological studies, the decreases of viscosity and storage modulus were confirmed for the increase of EO content and molecular weight, so that the resulted foam had low structural stability and high open cell content. The cell opener having ester linkage in molecule exhibited the lowest values of viscosity and storage modulus and the obtained foam has high open cell content. However, the structural stability increased due to the larger intermolecular interaction of ester linkage. The hardness, tensile strength, tear strength and elongation of foam were deteriorated with increase of EO content and molecular weight of tell opener. On the other hand, the cell opener having ester linkage in molecule improved the values of tensile strength, tear strength and elongation.

• The Mathematical Education
• /
• v.56 no.4
• /
• pp.407-434
• /
• 2017

The purpose of this study is to develop and verify the TPACK measurement tool for middle and high school mathematics teachers in the Korean context. Also, by clarifying the relationship between subordinate factors of Mathematics teachers' TPACK, an attempt was made to provide suggestions on the designs and directions for the in-service and pre-service teacher education and the programs for improving mathematics teachers' TPACK in the future. In order to achieve this goal, TPACK factors of mathematics teachers were extracted by reviewing literature on PCK, MKT, and TPACK. Then, content validity, basic statistical survey, reliability verification, exploratory factor analysis, confirmatory factor analysis, and structural equation model verification were conducted sequentially. At first, preliminary analysis was carried out on 79 mathematics teachers, and 76 items excluding the items with extreme value and reliability were included in the basic statistical analysis. And secondly, an exploratory factor analysis was conducted on 376 mathematics teachers, and this instrument consisted of 7 subordinate factors(CK, PK, TK, PCK, TCK, TPK, TPACK) and 61 items. Also by conducting confirmatory factor analysis and structural equation model test with 254 mathematics teachers, the measurement tool was confirmed the validity and reliability through statistically significant analysis. Then, the importance of integrated knowledge was confirmed by looking at the relationship between the TPACK factors of in-service mathematics teachers. The integrated knowledge(PCK, TCK, TPK) has played a crucial role in the formation of TPACK rather than the knowledge of CK, PK, and TK alone. Finally, the validity of TCK was confirmed through the structural equation modeling of TPACK. TCK not only directly affected TPACK, but also indirectly through TPK. According to these affirmative results, this measurement tool is claimed to be suitable for measuring the factors of Mathematics teachers' TPACK, and also the structural equation model can be regarded as a suitable model for analyzing the structural relationship of mathematics teachers' TPACK.

• STI Policy Review
• /
• v.5 no.2
• /
• pp.96-121
• /
• 2014

This study identifies and evaluates inter-ministerial coordination for developing digital content technology in Korea and Japan. It is conducted through a comparative analysis between Korean and Japanese governmental organizations and their decision making process. Media content had been regulated or promoted by ministries involving culture in both countries. The digitalization of traditional media, however, blurred boundaries between the cultural, technological, and industrial spheres, so ministries involving science and technology, economy and trade, or foreign affairs started to promote digital content technology in the late 1990s. This has been the cause of conflicts among ministries and sometimes led to policy duplication, which in turn weakens policy effectiveness. The competition and coordination of ministries and agencies can be seen through establishing or amending related laws, organizations, and programs. Structural holes are founded in the networks drawn among governmental agencies in charge of digital content, particularly in the field of intellectual property in Korea and online distribution technology in Japan.

• Journal of Crop Science and Biotechnology
• /
• v.11 no.1
• /
• pp.57-62
• /
• 2008

Isoflavone content in various parts of six soybean cultivars and soybean sprout during germination was analyzed by high performance liquid chromatography. The parts analyzed were seed coat, cotyledon, and axis for seeds and whole sprout, root, hypocotyl, and cotyledon for sprout. Two cultivars, Aga3 which is known to have the smallest seed size and the highest isoflavone content among the Korean soybean cultivars and Pungsannamulkong which is the most widely being used as soy-sprout, were selected for sampling from 1 to 10 days after germination. At the same weight, the order of isoflavone content increased from seed coat to cotyledon to axis. The highest total isoflavone(isoflavone$\times$dry weight) content was observed in the cotyledon and the lowest in the seed coat. The cotyledon of the Aga3 variety had the highest total isoflavone content and the lowest was measured in the Pungsannamulkong variety. The highest total isoflavone content, $10,788{\mu}g/g$, was observed in whole sprouts(cotyledon+hypocotyl+root) on day 7 for Aga3. After day 7, there was a decreasing trend in isoflavone content as the germination period increased. Total isoflavone content in the cotyledon of Aga3 significantly increased after seed germination, whereas the isoflavone content in the cotyledon of Pungsannamulkong decreased. However, total isoflavone content in the root of both varieties increased while isoflavone content in the hypocotyls decreased after seed germination.