• 한국건축시공학회지
• /
• 제21권4호
• /
• pp.377-386
• /
• 2021

본 연구는 지난 2019년 4월에 대한건축학회 기술표준(AIK-S-001-2019)으로 제정된 복합열화 및 구조체 거동이 동시에 작용하는 환경에서의 방수층 성능 시험방법에 있어 일부 표준 내용 중 현장 시공성 반영 부족 문제와 표준 시공 방법으로서 오류 부분 등이 지적되면서 이를 보완해야 한다는 관련 업계, 시공사, 발주자(건설사) 등에서 의견이 제안되었다. 이에 본 연구를 통하여 시험 항목인 구조물 거동대응성능 시험방법에 있어 현장 시공성, 시험 결과의 정량화, 기타 개선 사항 등을 고찰하였다. 고찰된 내용을 이용하여 표준(안)으로 제정 중인 (가칭)점착형 복합 방수시트에 포함되어 진행하고 있는 구조물거동대응성능 시험방법에 표준 규격으로서 활용 가능성과 현장 시공성 반영 문제 등의 개선 내용을 검토하였다. 또한, 검토된 내용을 반영하여 1차와 2차 성능평가를 실시하여 그 결과를 도출하였다. 이에 본 연구를 통하여 도출된 개선(안) 및 성능평가 결과를 토대로 (가칭) 점착형 복합방수시트 제정(안)의 기초 자료로 활용하고자 한다.

• 전산구조공학
• /
• 제10권2호
• /
• pp.131-138
• /
• 1997

이 논문에서는, 균일한 횡방향 인장변형률이 작용하는 조건에서 강체모재들을 결합하고 있는 점탄성 접착재층의 계면모서리에 발생하는 응력 특이성을 조사하고있다. Williams방법을 응용하여 라플라스 변형공간에서 특성방정식을 구하였고, 주어진 점탄성 모델에 대해서 변형공간에서의 특성방정식을 시간공간으로 해석적으로 전환하였다. 시간 공간에서의 특이차수는 수치적으로 계산하였다. 계면을 따라 발생하는 응력의 특성을 조사하는데 시간영역 경계요소법을 적용하였다. 수치해석 결과에 의하면, 특이차수는 시간이 경과함에 따라 커지는 반면에, 자유모서리 응력확대계수는 시간에 따라 이완되는 특성을 보여주고 있다.

• Structural Engineering and Mechanics
• /
• 제59권2호
• /
• pp.313-326
• /
• 2016

In this study the three-dimensional nonlinear finite element method was used to analyze the stresses distribution in the adhesive layer used to joint two Aluminum 2024-T3 adherends. We consider in this study the effect of different parameters witch directly affect the values of different stresses. The experimental design method is used to investigate the effects of geometrical parameters of the single lap joint in order to achieve an optimization of the assembly with simple lap joint. As a result, it can be said that both the geometrical modifications of the adhesive and adherends edge have presented a significant effect at the overlap edge thereby causing a decrease in peel and shear stresses. In addition, an analytical model is also given to predict in a simple but effective way the joint strength and its dependence on the geometrical parameters. This approach can help the designers to improve the quality and the durability of the structural adhesive joints.

• Journal of the Korean Wood Science and Technology
• /
• 제51권2호
• /
• pp.81-97
• /
• 2023

The aim of this study were to evaluate tannin resorcinol formaldehyde (TRF) for the preparation of cross-laminated timbers (CLTs) made from fast-growing tree species and to analyze the physical and mechanical properties of CLTs. TRF copolymer resin was prepared by using the bark extracts of Swietenia mahagoni (L.) Jacq. It was observed that the TRF adhesive possessed less solid content (23.59%), high viscosity (11.35 poise), and high pH values (10.0) compared to the standard phenol resorcinol formaldehyde. The TRF adhesive was applied to produce CLTs with the addition of 15% tapioca and flour as an extender. The six-layered CLTs were produced from sengon (Falcataria moluccana Miq.), jabon [Anthocephalus cadamba (Roxb) Miq.], coconut (Cocos nucifera L.), and the combination of coconut-jabon and coconut-sengon wood. The analysis of variance revealed that the layer composition of CLT significantly affected the physical and mechanical properties of the beam. While the modulus of rupture met the standard, the moisture content and modulus of elasticity values did not fulfill JAS 1152-2007. All of the CLTs produced in this study demonstrated low formaldehyde emission, ranging from 0.001 mg/L to 0.003 mg/L, thereby satisfying the JAS 1152 for structural glue laminated timber.

• Journal of the Korean Wood Science and Technology
• /
• 제37권2호
• /
• pp.121-127
• /
• 2009

Acacia wood (Acacia mangium Willd.) is the most popular fast growing tree species planted in timber estate in Indonesia and is considered to be very valuable raw materials for structural composite products. The objective of the research was to evaluate the properties of OSB prepared from A. Mangium wood with or without immersing the strands to hot water at $80^{\circ}C$ for 2 hours. MDI adhesive was used in 3 levels i.e., 3%, 5%, and 7%. The moisture content of strand was 7%. The results indicated that immersing strands in hot water for 2 hours at $80^{\circ}C$ prior to manufacture OSB improved significantly the mechanical peoperties (i.e., MOR and MOE) of OSB. The higher the adhesive content resulted in the better the dimensional stabilisation (i.e., water absorption and thickness swelling) and the mechanical properties (i.e., MOR, MOE and IB) of OSB. OSB prepared from hot-water immersed strands with 5% adhesive content has met all parameters requirement on the JIS A 5908 (2003) standard.

• Journal of the Korean Wood Science and Technology
• /
• 제26권1호
• /
• pp.14-18
• /
• 1998

A low density polyethylene(LDPE) was examined as an additive in phenol-formaldehyde(PF) resin adhesive for bonding radiata pine plywood. The LDPE was supplied by the commercial manufacturer. The LDPE was compared to a commercial filler commonly used in structural plywood adhesives in the United States. The adhesive mixes were made by following the recommended procedure of Georgia-Pacific Resins Inc.. using plywood-type PF resin. A total of 48 three-ply plywoods. 6.3 mm nominal thickness and 30 by 30 em in size, were made at two press times (4 and 5 min). two press temperatures (150 and $160^{\circ}C$) and 30 minute assembly times for four adhesive mixing types. Evaluations of the LDPE addition were carried out by performance tension shear tests after two cycle boil aging tests on plywood per the U.S. Product Standard PS I-83. After accelerated-aging tests. plywoods were exhibited no delamination. The test results included tension shear strength and estimated wood failure values. The plywood test results support the use of polyethylene as an additive in plywood adhesives.

• 한국기계가공학회지
• /
• 제20권4호
• /
• pp.127-134
• /
• 2021

In this study, the adhesive fracturing characteristics of a DCB specimen due to single and heterogeneous bonding materials under tearing load was investigated. The experiments were conducted to examine the fracturing properties of the adhesive DCB specimen. As an experimental condition, a forced displacement of 3mm/min was applied to one side while the other side was fixed. As a result of the experiment, it was found that the AL6061-T6 material was superior to the CFRP material in terms of maximum stress, specific strength, and energy release rate when compared to the adhesive fracturing property of a single material. We tested CFRP-AL, a heterogeneous bonding material, and compared its experimental results to the results from the single materials. Based on these results, CFRP-AL with a heterogeneous bonding material was observed to have the superior structural safety compared to single materials for the mode III fracture type.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.817-818
• /
• 2009

• 한국항공우주학회지
• /
• 제43권10호
• /
• pp.928-935
• /
• 2015

본 논문에서는 상온접합이 있는 무인기 복합재 날개의 저온 구조시험에 대하여 소개하였다. 본 시험에 사용된 날개구조는 탄소섬유 강화 복합재료로 구성되며, 내부 구조물과 스킨은 상온접착제로 접합되었다. 또한 날개구조의 손상허용성을 검증하기 위하여 육안으로 확인이 거의 불가능한 충격손상을 스킨의 주요 부위에 인위적으로 적용하였다. 무인기 운용 고도의 온도환경을 모사하기 위한 저온 챔버를 특별히 제작하였으며, 날개구조는 챔버내에 고정시키고 챔버 외부에 설치한 유압 작동기를 이용하여 하중을 부가하였다. 구조시험은 변형률 개관 시험 및 1배 수명 피로하중 스펙트럼에 대한 손상허용시험으로 구성된다. 변형률 게이지와 광섬유 센서를 이용하여 본딩영역 및 주요 부위의 변형률을 측정하였으며, 압전 구동기/센서를 이용하여 손상의 변화를 모니터링 하였다. 시험결과로부터 날개구조는 1배 수명에 대한 운용환경을 모사한 환경 하에서 구조적 건전성을 보유하고 있음을 확인하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.349-352
• /
• 2006

Pull-off test is generally used as a method of evaluating bond strength of FRP with concrete at the job site. However, pull-off test damages FRP composites and the maximum pull-off strength is limited up to tensile strength of concrete. Accordingly, it is required to set-up a test method that can simply evaluate bond performance of structural adhesive. This study suggested compression and bending test of epoxy resin as test methods that can indirectly evaluate performance of adhesive, as well as standardized test specification for different types of specifications from various countries. In this study, the section dimension of compression and bending test specimens is unified, and standard test specimen size is achieved by test results.