• 제목/요약/키워드: Strontium-90

검색결과 56건 처리시간 0.025초

Adsorption and separation behaviors of Y(III) and Sr(II) in acid solution by a porous silica based adsorbent

  • Wu, Hao;Kawamura, Taiga;Kim, Seong-Yun
    • Nuclear Engineering and Technology
    • /
    • 제53권10호
    • /
    • pp.3352-3358
    • /
    • 2021
  • Aiming at selective adsorption and separation of Y(III) from the Y(III)-Sr(II) group in acid solution, a silica-based TODGA impregnated adsorbent [(TODGA+1-dodecanol)/SiO2-P-F600] has been prepared. Batch adsorption experiments were conducted under the effect of contact time, acid concentration, solution temperature, and adsorption capacity etc. Chromatography recovery of more than 90% Y(III) was successfully achieved under elution with 0.01 M DTPA solution in nitric acid adsorption system, and 0.1 M HCl solution in hydrochloride adsorption system, respectively.

Crown Ether/Chloroform 용매추출법을 이용한 토양시료중의 $^{89}Sr,\;^{90}Sr$ 분석 (Analysis of $^{89}Sr,\;^{90}Sr$ in Soil Sample Using Crown Ether/Chloroform Solvent Extraction Method)

  • 홍광희;최용호;김상복;이명호;박효국;최근식;김삼랑;이창우
    • Journal of Radiation Protection and Research
    • /
    • 제21권1호
    • /
    • pp.9-16
    • /
    • 1996
  • 환경시료 중 토양에 대한 방사성 스트론튬인 $^{89}Sr$$^{90}Sr$의 분석을 위해 Ca과 Sr을 분리하기 위한 방법으로 Crown ether를 이용한 추출방법을 사용하여 기존의 발연질산법과 비교하여 보았다. Crown ether를 이용한 추출방법을 기존의 발연질산법과 비교하여 보았을 때 높은 Sr 수율을 보였을 뿐만 아니라 분석에 소요되는 시간과 절차가 훨씬 빠르고 간단했다. Crown ether을 이용한 추출방법으로 원전주변 토양에 대한 방사성 스트론튬의 분석을 수행하였으며, 방사성핵종 분석에 의한 환경감시의 효율적인 수행을 위한 스트른튬 분석법을 제시하였다

  • PDF

Organic Association of the Fallout radionuclides in the Soil

  • Lee, Myung-Ho;Park, Hoi-Guk;Lee, Chang-Woo;Park, Yong-Ho;Kim, Sang-Bog;Hong, Kwang-Hee;Park, Gun-Sik;Lee, Jeong-Ho
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 1997년도 춘계학술발표회논문집(2)
    • /
    • pp.439-444
    • /
    • 1997
  • In order to investigate organic association of fallout cesium, strontium and plutonium in the soil, soil samples influenced by fallout from nuclear weapon testings were treated with alkali (0.1 M-sodium hydroxide solution) to extract organic acids. After extraction, the resultant three fractions (sedimentary residue, humic and fulvic acid fractions) were subjected to the r-ray spectrometric analysis for $^{137}$ Cs, and radiochemical analysis for gosr and $^{239,240}$Pu. Alkali extraction experiments showed that a lot of $^{ 239,240}$Pu was extracted to organic acids from the soil samples, whereas most of $^{137}$ Cs and $^{90}$ Sr remained in residual fraction. Less than 10% of the total $^{137}$ Cs and $^{90}$ Sr was found in the organic fraction. The concentrations of $^{137}$ Cs and $^{90}$ Sr associated with humic fractions were higher than those with the corresponding fulvic fractions. It was found that more than 40% of the total $^{239,240}$Pu was associated with the organic fraction of soils. In contrast with $^{137}$ Cs and $^{90}$ Sr, $^{239,240}$Pu associated with vulvic fractions was much higher than in humic fractions.

  • PDF

Geiger-Muller 계수관을 이용한 베타선측정에서 디텍터 보호유무에 따른 계수율 분석 (Analysis of Counting Rate according to Presence or Absence of Detector's Protector in Beta-rays Measurement using Geiger-Muller Counter)

  • 장지용;정문택;송종남;하재준;한재복
    • 한국방사선학회논문지
    • /
    • 제12권1호
    • /
    • pp.31-37
    • /
    • 2018
  • 단창형의 Geiger-Muller 계수관을 이용한 표면오염검사에서 베타선을 측정하기 위해 외부로 노출된 디텍터를 보호하는 방법으로 랩을 사용하고 있는데 이 방법이 측정계수율과 교정인자에 미치는 영향을 분석하고 방사선작업종사자에게 과도한 랩의 사용은 베타선의 측정값에 영향을 줄 수 있음을 인지시켜주고자 하였다. 실험방법은 3 KBq, 1.5 KBq, 0.3 KBq의 에너지가 다른 베타선을 이용하여 랩 두께에 따른 베타선 측정계수율과 교정인자의 변화를 비교 분석하였다. 실험 대상으로는 2012년 3월 한국인정기구 (KOLAS) 인증을 받은 교정센터에서 보유한 단창형의 Geiger-Muller 계수관을 대상으로 하였으며, Cl-36(Chlorine)과 Sr-90(Strontium)을 베타선 방사선원으로 사용하였다. 측정계수율은 랩 두께가 증가할수록 감소함을 확인 할 수 있었고 교정인자는 랩 두께가 증가할수록 증가하는 것을 알 수 있었다. 측정계수율의 감소와 교정인자의 변화는 기기지시값의 정확도를 감소시킬 수 있지만 디텍터의 오염 및 손상 또한 베타선 측정에서 중요한 영향을 주기 때문에 어느 정도 두께의 랩을 사용함이 가장 효과적인지 알아볼 필요성이 있다. 측정계수율과 교정인자의 낮은 변화율을 보여주는 두께의 랩을 사용한다면 디텍터를 보호하면서 베타선의 측정값에도 영향을 최소한으로 줄 수 있을 것으로 사료된다.

나노여과/역삼투 공정을 이용한 기능성 미네랄의 농축 (Concentration of Functional Mineral by NF/RO Processes)

  • 이호원;문수형;고경수
    • 멤브레인
    • /
    • 제19권4호
    • /
    • pp.277-284
    • /
    • 2009
  • 지하수 중의 바나듐 및 실리카의 농축에 적합한 막을 선정하기 위하여 2종류의 나노여과 막모듈(NE2540-90, NF90-2540)과 3종류의 역삼투 막모듈(BW30-2540, RE2540-TE 및 XLE-2540)에 대한 투과선속과 배제율을 측정하였다. 투과선속과 배제율에 대한 실험 결과 본 연구에 사용된 나노여과 막모듈과 역삼투 막모듈 중에서 NE2540-90 막모듈이 바나듐과 실리카의 농축에 가장 적합하였다. NE2540-90 막모듈을 사용하여 막간차압을 $8\;kgf/cm^2$로 하였을 때, 바나듐 및 실리카의 배제율은 각각 98.2% 및 99.0%이였고, 알루미늄, 크롬, 철, 붕소, 스트론튬 및 바륨에 대한 배제율은 각각 92.0%, 83.6%, 96.0%, 45.1%, 98.6% 및 69.5%이였다. 서귀포지역 지하수를 각각 회수율 15%로 6단 처리하였을 때, 바나듐과 실리카 함량은 각각 $148.9\;{\mu}g/L$ 및 85.8 mg/L로 농축되었다. 나노여과 공정에 의한 농축수는 고농도의 바나듐과 실리카를 함유하고 있어 기능성음료로의 상품개발이 가능할 것으로 판단된다.

강유전체 위상 변위기를 위한 Reactive Circuit 설계 및 구현 (Design and Implementation of Reactive Circuit for Ferroelectric Phase Shifter)

  • 김영태;문승언;이수재;김선형;박준석;조홍구
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2003년도 하계학술대회
    • /
    • pp.286-288
    • /
    • 2003
  • In this paper, in order to obtain a large differential phase shift with a little change in applied voltage, a ferroelectric reflective load circuit has been designed on top of barium strontium titanate $(Ba,Sr)TiO_3$ [BST] thin film. The design of the ferroelectric reflection-type phase shifter is based on a reflection theory of terminating circuit, which has a reflection-type analogue phase shifter with two ports terminated in symmetric phase-controllable reflective networks. To achieve large amounts of phase shift in low bias-voltage range, the effects of change of capacitance and transmission line connected with two coupled ports of a 3-dB $90^{\circ}$ branch-line hybrid coupler have been investigated. A large phase shift with a small capacitance change in the parallel terminating circuit has been demonstrated in the paper.

  • PDF

조성변화에 따른 BST 박막의 특성에 관한연구 (A study on the characteristics of BST thin films with various Ba/Sr Ratio)

  • 류정선;강성준;윤영섭
    • 전자공학회논문지A
    • /
    • 제33A권6호
    • /
    • pp.120-126
    • /
    • 1996
  • In the present study, we have studied on the characteristics of BST thin films with various Ba/Sr ratios by using sol-gel method. Barium-acetate, strontium-acetate and titanium isopropoxide are used as starting materials to fabricate BST thin films by sol-gel method. The fabrication conditions are estabilished through the TG-dT analyses and XRD measurements. BST thin films with the Ba/Sr ratios of 90/10, 70/30, 50/50 and 30/70 were deposited on the Pt/Ta/SiO$_{2}$Si substrate with the estabilished sol-gel process, and their characteristics were examined. The relative permittivity and the leakage current density at 5V vary from 287 to 395 and from 2.3 to 220${\mu}$A/cm$^{2}$, respectively, with various Ba/Sr ratio. Among the films investigatd in this research, BST (70/30) thin film shows the best relative permittivity and dielectric loss of BST (70/30) thin film are 395 and 0.045, respectively and the leakage current density at 5V is 2.3${\mu}$A/cm$^{2}$.

  • PDF

Geochemistry and isotope compositions of the Han River, Korea

  • 류종식;이광식;장호완;김용제
    • 한국지하수토양환경학회:학술대회논문집
    • /
    • 한국지하수토양환경학회 2003년도 추계학술발표회
    • /
    • pp.435-437
    • /
    • 2003
  • In order to investigate processes and factors controlling the chemical and isotopic compositions of the Han River, seasonal studies were carried out. The North Han River was much lower in the concentrations of total dissolved solids (TDS), dissolved inorganic carbon (DIC) and major ions than the South Han River, but higher in $SiO_2$ concentration, $\delta$$^{34}$ $S_{so4}$ value and $^{87}$ Sr/$^{86}$ Sr ratio. This indicates that the chemical and isotopic compositions of the Han River were strongly controlled by the geology of their drainage basins: silicate rocks in the North Han River and carbonate rocks in the South Han River. The $\delta$$^{34}$ $S_{so4}$ values were relatively higher in the North Han River (5.90$\pm$1.46$\textperthousand$)) than in the South Han River (3.48$\pm$0.73$\textperthousand$). This implies that dissolved S $O_{4}$$^{2-}$ in the North Han River might be mostly derived from deposition of atmospheric sulfates, whereas in the South Han River from oxidation of sulfide minerals in the abandoned poly-metallic deposits and the coal-bearing sedimentary rocks distributed over the upstream as well as deposition of atmospheric sulfates. The $^{87}$ S $r^{86}$ Sr ratios in the North Han River were distinctly higher than those in the South Han River, reflecting water-rock interaction with different rock types.pes.

  • PDF

사형 주조 마그네슘 합금의 인장 특성에 미치는 합금 원소와 결정립 미세화의 영향 (Effects of Alloying Element and Grain Refinement on the Tensile Properties of Mg-Alloy Casted with Sand Mold)

  • 한재준;권해욱
    • 한국주조공학회지
    • /
    • 제31권4호
    • /
    • pp.212-217
    • /
    • 2011
  • The effects of alloying element and grain refinement on the tensile properties of magnesium alloy poured into sand mold were investigated. The strength of magnesium alloy was greatly increased by the addition of aluminium and that was increased with the increased aluminum content added up to 8.10 wt% and decreased beyond that. Even though the strength of Mg-8.10 wt%Al alloy was rather decreased by the addition of zinc, that was increased with increased zinc content added up to 0.50 wt% and decreased with the increased one beyond that. The maximum tensile strength was obtained with 0.50 wt%Mn added. The strength and elongation were simultaneously increased with grain refinement and the optimum amount of strontium addition for this was 0.30 wt%. The optimum chemical composition was obtained and the yield strength, tensile strength and elongation of the alloy with this composition were 90.2, 176.3MPa and 4.43%, respectively.

Symmetrical Solid Oxide Electrolyzer Cells (SOECs) with La0.6Sr0.4Co0.2Fe0.8O3 (LSCF)-Gadolinium Doped Ceria (GDC) Composite Electrodes

  • Lee, Kyoung-Jin;Lee, Min-Jin;Park, Seok-hoon;Hwang, Hae-Jin
    • 한국세라믹학회지
    • /
    • 제53권5호
    • /
    • pp.489-493
    • /
    • 2016
  • Scandia ($Sc2O_3$)-stabilized zirconia (ScSZ) electrolyte-supported symmetrical solid oxide electrolyzer cells (SOECs), in which lanthanum strontium cobalt ferrite (LSCF)-gadolinia ($Gd_2O_3$)-doped ceria (GDC) composite materials are used as both the cathode and anode, were fabricated and their high temperature steam electrolysis (HTSE) performance was investigated. Current density-voltage curves were obtained for cells operated in 10% $H_2O$/90% Ar at 750, 800, and $850^{\circ}C$. It was possible to determine the ohmic, cathodic, and anodic contributions to the total overpotential using the three-electrode technique. The HTSE performance was significantly improved in the symmetrical cell with LSCF-GDC electrodes compared to the cell consisting of an Ni-YSZ cathode and LSCF-GDC anode. It was found that the overpotential due to the LSCF-GDC cathode largely decreased and, at a given current density, the total cell voltage decreased, which resulted in the enhanced hydrogen production rate in the symmetrical cell.