• Journal of the Korean Ceramic Society
• /
• v.44 no.5 s.300
• /
• pp.166-172
• /
• 2007

In this study, magnetic properties of the strontium ferrite were theoretically investigated by Ab initio (first principle) method. The influences of various additives on the magnetic properties of the strontium ferrite were analyzed to designed new composition of the strontium ferrite system with high magnetic characteristics. As shown in the results, the total magnetization of the strontium ferrite was $42.55M_B$. Based on the DOS results, the magnetic characteristics of the strontium ferrite were mainly influenced by Fe atoms at 6 positions in the unit cell. Also the La-Mn strontium ferrite has the superior magnetic property than the Mn strontium ferrite.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.05a
• /
• pp.76-77
• /
• 1998

• Electrical & Electronic Materials
• /
• v.8 no.3
• /
• pp.324-331
• /
• 1995

0.36[wt%l $SiO_{2}$ and 0.1[wt%] $H_{3}$B $O_{3}$ were added to strontium ferrite magnets of the magnetoplumbite phase SrO.5.7F $e_{2}$ $O_{3}$ to hinder grain growth and accelerate sintering, respectively. This experiment was carried out to investigate effect of particle size distribution as a function of milling time(20, 30, 40, 50, 60, 70 hours) on the magnetic properties of SrO.5.7F $e_{2}$ $O_{3}$ ferrite magnet. The B-H curve, density and the degree of orientation were measured. And the microstructure of ferrite magnets was examined with a SEM. The optimal conditions and properties of the typical sample are the following : The milling time was 60 hours. Magnetic and physical properties are $B_{r}$=4, 000[G], $_{b}$ $H_{c}$=3, 330[Oe], (BH)max=3.786[MGOe], $_{I}$ $H_{c}$=3, 525[Oe], density=5.0063[g/c $m^{3}$] and orientation factor f=0.813.0.813.3.3.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2017.05a
• /
• pp.114-114
• /
• 2017

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.49-52
• /
• 1998

Preparation of hexagonal strontium-ferrite by modified spray co-roasting(MSC:H) which is expected to shorkn the length of the process and to elevate the magnetic properties of hard ferrite was studied. We prapared $Fe_2O_3/SrCO_3$ mixture powders by MSCR after stirring ionized $FeCI_2$ in distilled water with solid state $SrCO_3$. And then calcined the mixture powders up to $1150^{\circ}C$ for Sr-ferrite powders It is possible to prepare hexaferrite powders with high saturation magnetization (Ms > 69 emu/g) , coercivity (Hc > 4000 Oe) The nlagnetic values of saturation magnetization iire higher than those achieved by the conventional technique.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2009.12a
• /
• pp.247-249
• /
• 2009

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.11a
• /
• pp.51-52
• /
• 2016

• Proceedings of the Korean Magnestics Society Conference
• /
• 2016.05a
• /
• pp.137-137
• /
• 2016

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.201-201
• /
• 2006

영구자석은 크게 Hard ferrite와 희토류계 자석, 그리고 Alnico 주조자석으로 구별되어진다. 그동안 Hard ferrite는 산업적으로 전자기 응용제품 또는 각종 구동 모터에 응용되어 왔지만, 최근 Nd계 희토류 자것이 고성능 모터의 소재로 급격히 대체되고 있다. 하지만, 희토류계 원료에 비해 동일 중량 대비 40~60배 가량 저렴한 Hard ferrite의 사용은 현재까지도 꾸준히 유지되고 있으며, 최근 자동차 고성능 모터용 Sr ferrite의 개발이 연구 중이다.[2] 본 연구에서는 제일원리 전산모사를 통하여 HCP 구조의 기본 Unit Cell 64개 원자를 가진 Sr-ferrite의 격자상수를 계산하여 기존 연구결과와 비교하였으며, 자화에너지와 자기모멘트를 계산하였다. 또한 향후 각종 첨가물의 영향에 대한 연구를 위해 기본 구조 및 치환 구조에 대해 고찰하였다. 그 결과 가장 안정한 에너지를 갖는 격자상수는 a=5.88, b=23.03으로 계산되어 Kimura et al의 측정 결과와 유사한 결과를 얻을 수 있었으며, $E_F$가 3.9171, $M_B$는 46.6481로 계산되었다. 항후 Sr-ferrite의 구조에서 Fe atom의 일부를 동일주기 원소인 Cr, Mn, Co, Ni, Cu로 치환하여 자기적 특성을 계산하여 본 연구결과와 비교하고자 한다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2013.12a
• /
• pp.52-52
• /
• 2013