• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.5
• /
• pp.644-651
• /
• 2009

In this paper, the design results of a $22.5^{\circ}$ diode phase shifter for the RADANT lens and two $11.25^{\circ}$, $22.5^{\circ}$ dielectric phase shift layers for the diode phase shifter are presented. The amount of phase shift introduced by each dielectric layer depends on the thickness and the shape of the metal strip and the electrical property of the diode. The equivalent circuit model is employed to represent the dielectric phase shift layer, and the simulated result of the equival circuit model is compared with the result of the field simulation. The measured data of the fabricated $11.25^{\circ}$, $22.5^{\circ}$ dielectric phase shift layer shows about $2^{\circ}$ phase shift error.

• 한국전산유체공학회:학술대회논문집
• /
• 2007.04a
• /
• pp.149-152
• /
• 2007

The numerical simulations on the heat transfer and flow field were carried out for the improvement of the performance of the shell and tube heat exchanger. The steady incompressible 3-D Navier-Stokes solution is obtained with the actual operational condition and geometry of the heat exchanger. The present geometry of the heat exchanger causes poor heat transfer since the air inside shell dose not flow through the tube bundle, but around it. The enhancement of the heat transfer can be achieved by the variation of the design factor like the sealing strip located on the top/bottom and middle of the baffle.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.8
• /
• pp.40-51
• /
• 1996

This paper describes some research works of computer-aided design of blanking and piercing progressive die for stator and rotor parts. An approach to the system is based on knowledge based rules. The deveolped system is composed of six modules such as main program, input and shape treatment, production feasibility check, strip layout, die layout and drawing edit module. Using this system, design parameters ( geometric shapes, die and punch dimensions and dimensions of tool elements) are determined and output is gen- erated in graphic from. Knowledges for tool design are extracted from the plasticity theories, handbooks, relevant references and empirical know-hows of experts in blkanking companies. The developed system provides powerful capabilities for process planning and die design of stator and rotor parts.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.10
• /
• pp.890-896
• /
• 2008

Sheet metal forming is one of the most useful and important method in manufacturing of the autobody panels because of the excellent production rate. The objectives of sheet metal forming processes are getting a desired geometrical shape of products with good quality, low cost and reasonable lead time. In this paper, we examined the validity of finite element method analysis on the automobile FRT-PLR-L/R stamping process by using the lancing engineering method. Lancing is a press operation in which a single-line cut or slit is made on part way across the strip stock, without removing any metal. As a result, it has shown that the proper lancing engineering method could prevent fracturing by improving sheet metal flow.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.492-492
• /
• 2009

Nowadays in Republic of Korea, there is no distinct reference for the related design technology of rotor blade of wind turbine. Therefore the optimum design and evaluation of performance is carried out with foreign commercial code softwares. This paper shows in-house code software that evaluates the aerodynamic design of wind turbine rotor blade using blade element-momentum theory (BEMT) and processes that is applied through various aerodynamics theories such as momentum theory, blade element theory, prandtl's tip loss theory and strip theory. This paper presents the results of the numerical analysis such as distribution of aerodynamic properties and performance curves using in-house code POSEIDON.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.19 no.1
• /
• pp.15-22
• /
• 1982

The effects of the forebody geometry of ships on the response function of wave loads are investigated by numerical calculations based on a strip method. For the vertical wave loads both shearing forces and bending moments, the V-shaped bow gives greater responses than the U-shaped one in regular oblique waves. These results have been clarified by the vector diagram of all static and dynamic components contributing to the resultant wave bending moment. In the present evaluation the phase relation among the components plays an important role. And the effect of the forebody geometry on lateral wave loads seems to be negligible from the result of the present investigation.

• Transactions of Materials Processing
• /
• v.23 no.3
• /
• pp.145-150
• /
• 2014

Precision control of the slab is crucial for product quality and production economy in hot strip mills. The current study presents a new model for predicting width spread of a slab with a rectangular cross section during roughing. The model is developed on the basis of the extremum principle for a rigid plastic material and a three dimensional admissible velocity field. This model incorporates the effect of process variables such as the shape factor and the ratio of width to thickness. We compare the results of this model to 3-D finite element (FE) process simulations and also to results from a previous study.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.558-562
• /
• 2000

This research is concerned with the experiments on buckling characteristics of strain energy hinge(SEH) for solar arrays. The dynamic characteristics of the strain energy hinge is very important since it affects the shape and speed of the solar array deployment. The rapid deployment results in overshoot and undesirable residual vibrations. In this study, we carry out a series of buckling experiments to identify the dynamic characteristics of the SEH, which is made of strip measures. Buckling tests were done on the single-plate, double-plate and triple-plate SEH and VSEH. The experimental results show that the SEH has a very complex buckling behavior which can not be coped with theoretically. The modeling problem of the SEH is also discussed.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.54.1-54.1
• /
• 2018

Recent observational studies suggest that the environmental effects can shape the evolution of galaxies in clusters. In an attempt to better understand this process, we perform idealized radiation-hydrodynamic simulations of RAM pressure stripping on star-forming galaxies using RAMSES-RT. We find that extended HI disks are easily stripped by moderate ICM winds, while there is no significant decrease in the total mass of molecular gas. RAM pressure tends to compress the molecular gas, leading to enhanced star formation especially when the gaseous disk is hit by edge-on winds. On the other hand, strong ICM winds that are expected to operate at the centre of clusters strip both HI and molecular gas from the galaxy. Interestingly, we find that the strong ICM winds can induce the formation of relatively dense (~1H/cc) HI gas clouds at a distance from the disk.

• Korean Journal of Pharmacognosy
• /
• v.41 no.4
• /
• pp.297-302
• /
• 2010

Lophatheri Herba is the aerial part of Lophatherum gracile Bronghiart(淡竹葉, Gramineae). 25~75 cm in length. Stem: cylindrical with nodes, empty inside, externally pale yellowish green. Leaf: dehiscent of lanceolate lamina, shrunken and rolled, 5~20 cm long, 10~35 mm wide; surface: pale green ~ yellowish green, parallel-formed with veins of square reticulate, more distinct of appearance on the lower surface. Banbusae Caulis In Taeniam is the stringy strip derived from the stem with the peeled-off epidermis of Phllostachys nigra Munro var. henosis Stapf, and Phllostachys bambusoides Siebold et Zuccarini(竹葉, Gramineae). Irregular in size and shape, thin plane ~ strip-shaped, sometimes powdery, sometimes 1~3 mm thick. Outer surface: pale green ~ yellowish green, sometimes grayish white L. gracile and P. nigra have different origins although they show similar morphologic features. We were able to distinguish between L. gracile and P. nigra which are almost indistinguishable through this study. AFLP(Amplifide Fragment Length Polymorphism) was more suitable for identifying differences between L. gracile and P. nigra in comparison with other genetic analysis using chemical analysis. Therefore. molecular biological methods are believed to be useful for discovering origins of herbal medicines.