• 한국치위생학회지
• /
• 제3권2호
• /
• pp.197-208
• /
• 2003

This study was implemented for 84 students of dental hygiene to show the correlation between dental caries experience and improved caries activity test. Dental caries experience for the sample groups was examined and stimulative saliva secreted for 5 minutes was collected into the tube to check saliva secretion rate. Dentocult LB test was executed to observe Lactobacilli colonies after 96 hour cultivation of culture slides moistened with stimulative saliva. Dentocult SM test(screening strip, site strip) was done to measure SM colonies distribution after 48 hour cultivation of culture strips applied with collected saliva and dental plaque respectively, and salivary buffering capacity was checked by means of Dentobuff strip kit. Following conclusions are obtained after examining the relation between Dentocult LB, Dentocult SM, Dentobuff strip test results and DMFT index, salivary secretion rate. 1. Showed no significant difference between Dentocult LB test results and DMFT index, salivary secretion rate. 2. Showed no significant difference between Dentocult SM(screening strip) test results and DMFT index, salivary secretion rate. 3. Showed significant difference between Dentocult SM(site strip) test results and DMFT index(pE0.05), but showed no significant difference between Dentocult SM(site strip) test results and salivary secretion rate. 4. Showed no significant difference between Dentobuff strip test results and DMFT index, but showed a very wide difference between Dentobuff strip test results and salivary secretion rate(pE0.01).

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.212-212
• /
• 2000

This study was performed to construct a hot strip speed measuring system and check over whether the measured speed can be used for improving the mass flow of the head-end part of a hot strip in the 7-stand finishing mill. Because the mass flow in hot rolling mill affects the looper operation and the thickness and width control of a strip, accurate measurement of strip speed ie important. The measured speed was compared with the roll speeds of No. 6 and No.7 stand to check the performance of the system and analyzed to find how to apply the speed. As a result, it is shown that the accuracy of the system is enough, strip thickness error can be reduced by -275∼+200$\mu\textrm{m}$ using the measured speed and the existing FSU model has low accuracy for predicting forward slip rate. A neural network was developed to calculate forward slip rate instead of FSU model. The test result of the neural network shows that the neural network is more accurate than the FSU model.

• 한국산림과학회지
• /
• 제97권1호
• /
• pp.95-101
• /
• 2008

중국 닝샤(寧夏)회족(回族)자치구 옌츠현(池縣) 샤췐완(沙泉灣)의 북경임업대학 사막화 방지연구기지 닝티아오 수림대(樹林帶)에서 실시한 방풍실험 결과는 다음과 같다. 1. 0.5m 높이의 각 열별(列別) 방풍효과(防風效果)를 분석한 결과, 1H(H = Tree Height) ~ 5H 까지의 방풍효과는 3열(30.22%) > 2열(26.53%) > 1열(16.28%)의 순으로, 7H 이후의 방풍효과는 2열(16.11%) > 3열(12.79%) > 1열(9.82%)의 순으로 나타났다. 2열과 3열의 회귀분석 결과, 2열 수림대의 방풍효과는 44H에 이르렀으며, 3열 수림대의 방풍효과는 27H에 이르렀다. 이 결과를 통해 단거리에는 3열 수림대의 방풍효과가 높고, 장거리는 2열 수림대의 방풍효과가 높다는 것을 알 수 있었다. 2. 1.0m 높이의 각 열별 방풍효과를 분석한 결과, 평균 방풍효과는 1열 8.04%, 2열 8.23%, 3열 7.43%로 큰 변화 없이 비교적 안정적인 풍속을 나타냈다. 3. 평균 방사효과(防砂效果)는 2열(55.28%) > 3열(37.13%) > 1열(20.87%)의 순으로 나타났으며, 특히 2열 수림대의 경우, 1H 지점에서 방사율이 86.06%로 가장 높은 방사효과를 나타냈다.

• 한국전산유체공학회지
• /
• 제19권1호
• /
• pp.34-40
• /
• 2014

Conjugate heat transfer of an automotive oil cooler with offset-strip fins was numerically investigated to predict the performance of the oil cooler for various flow-rates. The simulations were conducted by directly modeling offset-strip fins with unstructured meshes. The incompressible Navier-Stokes equations coupled with energy equation were used for the present simulations. Heat transfer characteristics of the oil cooler was compared well with experimental results and the errors were approximately within 5 percents. It was found that the performance of the oil cooler increased as the flow-rate increased up to the flow-rate of 12 L/min, but the performance seemed to be saturated beyond a critical flow-rate, which was estimated as 15 L/min. Furthermore, it was confirmed that compared to the performance without fins, that of the oil cooler with offset-strip fins was increased by about 75 percents.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.16-26
• /
• 2005

Air-cooled heat sinks are employed in many electronic cooling applications since they provide significant heat transfer enhancement and operational flexibility. Strip-shaped fin heat sink is of interest and needs to be investigated as general cooling products for more applicability. The purposes of this study are to evaluate heat sink performance without bypass flow condition and to determine optimal heat sink geometries. The results show that the decreasing rate of thermal resistance of a heat sink decreases with increasing inlet air velocity, and the increasing rate of pressure drop increases with increasing inlet air velocity, but is not affected by input power. The increasing rate of optimal longitudinal fin spacing is larger than that of transverse fin spacing. The strip fin heat sink tested in this study showed better cooling performance compared to that of other plate fin type.matism. 2004; 50(11): 3504-3515.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권12호
• /
• pp.591-596
• /
• 2006

we have been developed on the ultra high concentration ozone generator system which is the core technology in the realization of the semiconductor photoresist strip process using the ozone-vapor chemistry. The proposed ozone generator system has the structure of the surface discharge type which adopt the high purity ceramic dielectric tube. We investigate the performance of the proposed ozone generator system experimentally and the results show that the system has very high ozone concentration characteristics of $19.7[wt%/O_2]$ at the flow rate of $0.3[{\ell}/min]$ of each discharge cell. As a result of the silicon wafer photoresist strip test, we obtained the strip rate of about 400[nm/min] at the ozone concentration of $16[wt%/O_2]$ and flow rate of $8[{\ell}/min]$. So, we confirmed that it's possible to use the proposed high concentration ozone generator system for the ozone-vapor photoresist strip process in the semiconductor and FPD industry.

• 한국진공학회지
• /
• 제17권6호
• /
• pp.544-548
• /
• 2008

반도체 공정에서 가장 많은 시간과 비용을 차지하는 공정 중 하나는 Photoresist strip 공정이다. 따라서 보다 빠르게 PR의 strip 공정을 단축하기 위한 연구가 계속 진행중에 있다. 하지만 기존 사용중인 strip용액을 대체하기 위한 물질을 찾는 것은 많은 비용을 수반한다. 본 연구에서는 PR의 strip 시간을 최대한 단축시키고 PR strip 잔여물의 빠른 제거를 위하여 기존 공정에서 사용 중인 strip 약액을 플라즈마에 의하여 활성화하는 방법(Plasma Liquid-Vapor Activation: PLVA)으로 PR strip 시간을 최대한 줄이는 방법에 대한 연구를 진행하였으며, 활성화된 strip용액이 더욱 빠른 strip율 성능을 나타내는 것을 확인하였다. 또한 PR strip에서 이온에 의한 영향을 받은 HDI-PR (high dose implanted photoresist)은 기존 strip용액으로 제거가 불가능하였다. 하지만 본 연구에서 제시한 PLVA 방법으로 활성화된 용액에서는 그 가능성을 확인하였고, 이러한 PLVA방법에 대한 물리적 연구를 위하여 HDI-PR 표면 내력의 변화를 측정하였다. 그 결과 PLVA 처리 전 후 HDI-PR의 표면 내력에 큰 변화를 확인하였다.

• 대한기계학회논문집B
• /
• 제25권10호
• /
• pp.1392-1399
• /
• 2001

The flow fields inside a molten Zn pot of continuous hot-chip galvanizing process were investigated experimentally. With varying several parameters including the strip speed Vs, flow rate Q of induction heater. scrapper location and baffle configuration, instantaneous velocity fields were measured using a PIV velocity field measurement technique. Inside the strip region, counter-clockwise rotating flow is dominant. The general flow pattern inside the strip region is nearly not influenced by the strip speed Vs, flow rate Q and the scrapper location. In the exit region, the flow separated from the moving strip due to the existence of a stabilizing roll ascends to the free surface, for the cases of no scrapper and scrapper detached form the roll. On the other hand, the ascending flow to the free surface is decreased, as the flow rate Q of induction heater increases. By installing a baffle around the uprising strip, the flow moving up to the stabilizing roll decreases. In addition, B-type baffle is better than A-type baffle in reducing speed of flow around the stabilizing rolls. However, the flow ascended to the free surface is largely influenced by changing the flow rate Q, and the scrapper location, irrespective of the baffle type.

• Journal of Mechanical Science and Technology
• /
• 제17권6호
• /
• pp.854-859
• /
• 2003

In this paper, we examine the singular stresses and electric fields in a functionally graded piezoelectric ceramic strip containing an eccentric crack off the center line under anti-plane shear loading with the theory of linear piezoelectricity. It is assumed that the properties of the functionally graded piezoelectric ceramic strip vary continuously along the thickness. Fourier transforms are used to reduce the problem to the solution of two pairs of dual integral equations, which are then expressed to a Fredholm integral equation of the second kind. Numerical values on the stress intensity factor and the energy release rate are obtained.

• 대한전자공학회논문지SD
• /
• 제44권1호
• /
• pp.22-27
• /
• 2007

반도체 또는 평판디스플레이 제조에 있어 노광공정 후의 PR(photoresist) 제거 공정으로 이용하기 위하여 경계 막 제어에 의한 오존처리공정 및 설비 구현에 대한 연구를 수행하였다. 개발한 초 고농도 오존생성기술과 vapor 발생 방식 경계 막 제어 오존처리공정설비에 의해 실리콘 웨이퍼 PR 제거시험을 수행하였으며 오존가스농도 16wt%, 오존가스 유량 $8[\ell/min]$에서 약 400nm/분의 높은 PR 제거율을 달성하였다.