• Journal of the Korean Home Economics Association
• /
• v.34 no.3
• /
• pp.123-136
• /
• 1996

This report deals with the relations between the vibration restraint and the stress-strain properties of the stretch fabrics. For this purpose, a survey was carried out about the preferences in sports-brassiere. Six experimental sports-brassieres of an equal design, but of different materials were tested for vibration using an accelerometer and a motion analyzer while the subject is jogging. 1. The results of the survey on sports-brassiere preferences are as follows; Preferable factors are simple design, shield and close adhesion of sports brassiere. Dissatisfied factors on the sports-brassiere are drooping, vibrating of the breast, itching and wetting. The B-cup-size group perceive the bigger vibration and drooping than A-cup-size. 2. The results of the wearing tests are as follow; This experiment shows the vibration restraint effects on different stretch fabrics, such as hard, medium and soft nature. There was a linear relationship between the vibration restraint and combination of different types of stretch fabrics. Among different brassiere types, the 2-layered brassiere (inner layer of high tension fabric and outer layer of lower stretch fabric) showed the least vibration. In the case of 2-lay brassiere, the wearing comfort rate was highest.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.2
• /
• pp.149-155
• /
• 2015

Purpose : Recently, many researchers and golf coachers demonstrated that X-factor and X-factor stretch had a co-relationship with driving distance. However, its relationship is still controversial and ambiguous. Thus, the aim of this study was to examine the relationship among X-factor, X-factor stretch and swing-related factors, including driving distance in elite golfers. Method : Seventeen male elite golfers (handicap: ${\leq}4$) with no history of musculo-skeletal injuries participated in the study. Thirty spherical retro-reflective markers were placed on including the middle point of PSIS, the right/left ASIS, the right/left lateral acromion of the scapula, driver head and shaft grip. All motion capture data was collected at 100Hz using 6 infrared cameras. Carry distance, club speed, ball speed, smash factor, launch angle, and spin rate were collected from radar-based device, TrackMan. Results : Pearson's correlation coefficient method was used to find the correlations among X-factor, X-factor stretch and swing-related factors. Positive correlations between driving distance and other swing-related factors which include club speed(r=.798, p<.001), and ball speed(r=.948, p<.001) were observed. In contrast to the swing-related factors, X-factor and X-factor stretch had no relationship to driving distance. Conclusion : These results indicate that X-factor and X-factor stretch are not key regulators in driving distance.

• Fashion & Textile Research Journal
• /
• v.14 no.2
• /
• pp.277-285
• /
• 2012

This research studied how to develop tight upper sportswear from 3D scan data considering fabric stretch property. Subjects were five Korean men of average figure in their 20's. Scanning was done for ten postures via vitus smart/pro(Techmath LTD). Analyzing from 3D scan data, more than 70% of the upper body surface showed surface change rate under 20%. It was shoulder and under arm side part that showed most noticeable body surface change when moving. A parametric model with convex surface was generated and flattened onto the plane, resulting 2D pattern. The error rate occurring in the process of 3D to 2D conversion was 0.2% for outline and 0.13% for area, respectively. Thirteen kinds of stretchable fabrics in the market were collected for this study. Stretch property was in the range of 16.0~58.2% for wale direction; 23.1~78.4% for course. Based on wear trial test, four fabrics were chosen for making the 1st experimental garment and finally one fabric was chosen for the 2nd one, which was developed applying 4 kinds of crosswise reduction rate on 2D pattern: 0, 5, 10, and 15%. Through wear trial test and garment pressure measurement, experimental garment applied with 10% pattern reduction rate was evaluated as most comfortable and considerable.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.11-19
• /
• 2015

Objective : The purpose of this study was to analyze the correlation between physical factors (X-factor, X-factor stretch) and club factors (club speed, ball speed, club path, smash factor, vertical launch angle, spin rate, flight time, total length) during impact and it affect on the total distance of the ball during a golf driver swing. Background : There were not enough studies that analyzed the correlation between physical factors(X-factor, X-factor stretch) and club factors(club speed, ball speed, club path, smash factor, launch angle, spin rate, flight time, total length) during a purpose swing to increase total distance. Method : For this study, 9 right handed professional male golfers (KPGA) were chosen. The test subject group used their own drivers and each took a total of 10 swings. These swings consisted of 5 purpose swings to increase total distance and 5 normal swings. Results : The purpose swing to increase total distance showed larger physical factors(X-factor, X-factor stretch) compared to a normal swing however the results were not statistically significant. Total distance increased during a purpose swing as a result of ball and club speed. Conclusion : The results showed that club factors, ball speed and club speed contributed the most in affecting the total distance of the ball during a purpose swing.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.3
• /
• pp.15-22
• /
• 2003

The fatigue crack growth model is derived and the retardation model is proposed. The fatigue crack growth model considers the residual plastic stretch on the crack surface which results from the plastic deformation at the tip of fatigue crack. The fatigue crack growth rate is calculated by using the cumulative fatigue damage and plastic strain energy in the material elements at the crack tip. This model gives the crack growth rate in reasonable agreement with test data for aluminum alloy AL6061-T651 and 17-4PH casting steel. The fatigue crack growth retardation model is based on the residual plastic stretch produced from a tensile overload which reduced the plastic strain range of the following load cycles. A strip-yield model of a crack tip plasticity is used for the calculation of a plastic zone size. The proposed retardation model characterized the observed features and delayed retardation of the fatigue crack growth under tensile overload.

• Transactions of Materials Processing
• /
• v.10 no.7
• /
• pp.525-533
• /
• 2001

PET bottles are main]y manufactured by the stretch blow-molding process. In order to improve the thickness distribution to avoid crack generation at bottom region of one-piece PET bottle, process analysis of stretch blow-molding using a finite element method has been carried out. Finite element analysis has been carried out using ABAQUS/Standard. CREEP user subroutine provided in ABAQUS has been used to model PET behavior that is rate sensitive. Among the process parameters, the effect of plunger movement to thickness distribution of bottle has been considered by axisymmetric analysis. A modified process of plunger movement, which yields more uniform thickness distribution, has been proposed. 3D FE analysis has been done to confirm the validity of the proposed process.

• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.339-342
• /
• 2005

In this paper, a hand-operating method (tiled test method) of the wool-blending sample is made out, and make use of the method, the test of wool-blending bundle in different blending ratio is accomplished. According to the test data, the synthesis method of the stretch curve is worked out and the synthesis software for the typical stretch curve of wool-blending bundle is designed. Through laboratory hand-operating method, the blending fasciculus applying to fiber bundle test can be obtained in a short time. Calculation for sampling is accomplished in the article. We bring up 9 new signs to describe the characteristics of the curve behind peak for the first time: elongation behind peak (HE), elongation percentage behind peak (HEP), relative elongation rate behind peak (RHE), total break work $(W_a)$, break work behind peak (HW), break work coefficient behind peak (HWC), elongation percentage of half-load behind peak (HEL), load percentage of half-elongation behind peak (HLE), break efficiency behind peak (HEC).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.6
• /
• pp.1010-1021
• /
• 2017

Adjustment of clothing pressure for compression wear is critical to the physiological and psychological satisfaction of the wearer; however, there are limited studies on the practical relationship among extensibility of materials, pattern reduction of compression wear and resultant clothing pressure. This study provides consumers and designers with information on clothing pressure using a screening extensibility test suggested by Ziegert and Keil (1988) even for the final products. As the first step, ten commercial products were collected and their size, extensibility and corresponding clothing pressure were analyzed. It was found that clothing pressure around the waist level could be predicted well from the information of Ziegert and Keil's (1988) % extensibility of the material (Z stretch %) and the actual application of Z stretch amount to the pattern reduction rate (applied % of Z stretch), with an $r^2$ of around 0.80, especially at the waist level. However, it was not simple for the case of clothing pressure around the back of the chest level due to the various design variation and the complexity of the anatomical structure around the trapezius.

• Journal of the Korean Society of Combustion
• /
• v.9 no.4
• /
• pp.22-27
• /
• 2004

Lean premix combustion is a best method in low $NO_x$ gas turbine combustor and we must know the characteristics of NO emission in high temperature and pressure condition in premix flame. Numerical analysis was performed to investigate the NO emission characteristics by adopting a counterflow as a model problem using detailed chemical kinetics. Methane $(CH_4)$ was used as a test fuel which is the main fuel of natural gas. The tested parameters were stretch rate, equivalence ratio, initial temperature, and pressure in premix flame. Results showed that NO emission was high in low stretch rate, near stoichiometric equivalence ratio, high initial temperature, and high pressure. Also, the pressure effect was sensitive in high temperature condition.

• Asian-Australasian Journal of Animal Sciences
• /
• v.9 no.2
• /
• pp.171-174
• /
• 1996

Muscle protein synthesis in vitro was measured in chicks fed low-protein(10% CP) and control(20% CP) diets. Right leg muscles (M. gastrocnemius) were mounted on a support made of stainless steel to stretch in constant tension, whereas left leg muscles were unmounted. Both leg muscles were incubated in Dulbecco's modified Eagle's medium including L-[$4-^3H$] phenylalanine for 60 min to measure in vitro protein synthesis. There was no significant difference in fractional synthesis rate(FSR) of muscle protein between both dietary protein levels, whereas FSR with stretch in constant tension was significantly higher than that without constant tension due to an increase in the absolute synthesis rate(ASR) per unit RNA(the efficiency of RNA to synthesize protein). The ASR of muscle protein in chicks fed the control diet was significantly higher than that in the low-protein diet group.