• 한국염색가공학회지
• /
• 제18권2호
• /
• pp.31-38
• /
• 2006

Silk fabrics are very popular and widely used because of their elegant appearance. However, silk fabrics generally have easy wrinkle, and do not stretch and deform permanently after machine washing. Then the stretched properties of silk fabrics are important for the application of industrial textile materials such as formal and sports wear. Thus, this research surveys the covering, weaving and degumming conditions for stretched silk fabrics. As a result, yarn breaking stress was reduced with increasing spindle speed, and the yarn twists were optimized under the covering condition of polyurethane/silk with PVA pretreatment. In addition, the shrinkage of the silk fabrics treated with star degumming process was reduced by continuous NaOH degumming process. The fabrics showed the fabric physical properties with optimum stretched properties and evenness surfaces.

• 소성∙가공
• /
• 제9권1호
• /
• pp.27-34
• /
• 2000

Sheet metal formabilities for aluminum 1050 and 5052 were experimentally investigated in this study. Deep drawability, bendability and stretch formability were measured at each process condition and correlated with tensile properties of sheet metal. To compare the formabilities of aluminum 1050 and 5052 sheets with those of steel sheets, deep drawing quality(DDQ) steel sheets are also tested at the same test conditions. Through the experimental studies, influential process variables for each forming process were obtained and correlated with the tensile properties. The comparisons of sheet metal formabilities with those of steed sheets showed that aluminum 1050 and 5052 is inherently deficient in formability than steel sheets but Al 5052 that has highter n and r value than al 1050 showed better formabilities.

• 소성∙가공
• /
• 제28권3호
• /
• pp.154-158
• /
• 2019

The hole expansion tests using conical punch, flat punch or hemispherical punch are widely used for stretch flangeability verification of HSS. In this study, we investigate the strain distribution on the shear edges of the hole expansion test using grid marking and a projector. A small crack at the edge is distributed, resulting in a large gap between the HER and the crack strain. The strain distribution at the edges is irregular due to anisotropy of sheet metal. While an edge perpendicular to the rolling direction indicate a lower strain level compared to an edge parallel to the rolling direction, edge cracks occur at the edge perpendicular to the rolling direction. To predict the manifestation of edge cracks in FE analysis, the result of the hole expansion test with a crack strain measurement may well be a better tool than FLD. In this case, the level of strain and the direction of the edge relative to the rolling direction should be well considered.

• 한국전자파학회논문지
• /
• 제24권3호
• /
• pp.292-298
• /
• 2013

본 논문에서는 미사일의 길이를 추정하는 신호 처리 기법의 개발에 관하여 소개한다. 표적의 길이를 추정하기 위해서는 미사일의 위치 및 표적과 레이더와의 각도 정보가 필요하다. 미사일의 위치 및 각도를 알아내기 위해서 chirp 파형을 사용했고, 레이더 영상 신호인 HRRP(High Resolution Range Profile)를 발생시키기 위해 stretch processing을 이용하였다. HRRP로부터 표적의 산란점(scattering center)을 찾기 위해 스펙트럼 추정 방법(spectral estimation technique)인 Relaxation(RELAX) 알고리즘을 이용하였다. 이 알고리즘으로부터 얻은 1차원 산란점의 정보를 이용하여 미사일의 길이를 추정하였다.

• 지구물리와물리탐사
• /
• 제21권2호
• /
• pp.94-102
• /
• 2018

지진파 간섭법으로 구한 심부 가상 반사파 영상 특성 분석을 위하여, 벌림 범위, 무작위 잡음, 손실 자료, 정적 이상 등의 요인이 간섭파 단면에 미치는 영향을 분석하였다. 중심주파수 5 Hz의 지표 점샘에서 발생한 지진파 입자운동속도의 수직성분을 1 km 간격으로 100 m 깊이에 매설된 201개 수신기에서 유한차분법으로 계산하였다. 모든 합성지진파 트레이스의 쌍을 교차 상관하여 간섭파를 구하였고, 통상적인 반사파 처리방법으로 반사단면을 작성하였다. 분석결과, 반사파 간섭법의 광각반사에 따른 문제점들은 최대 벌림범위를 설정하여 최소화할 수 있었으며, 무작위 잡음, 손실 자료, 정적 이상 등은 수직 시간차 보정시 이완뮤트의 영향으로 가상 샘으로부터 퍼져나가는 형태의 처리잡음이 발생함이 밝혀졌다. 이들 처리잡음의 수준은 공통 중간점 겹쌓기 단면상에서 배경잡음의 크기 및 지속시간에 가장 민감하며, 손실된 자료의 수와 정적 이상의 증가에 따라서도 증가하는 특성을 보인다.

• 대한원격탐사학회지
• /
• 제9권1호
• /
• pp.37-49
• /
• 1993

In this research, the WEF AX and APT(Automatic Picture Transmission) data receiving and image processing software using PC/AT called WADIPS(WEFAX and APT Data Integrated Processing System) Software has been developed. The main functions of WADIPS software are follow : 1) Real time receiving and saving to hard disk of WEFAX and APT data 2) B/W(Black and White) and false color display 3) Image enhancement using histogram stretch and color control 4) 2-4 times zooming 5) Hard copy of data using dithering and patterning 6) Animation 7) File management 8) On line help. WADIPS can be used in the offices or persons need real time meteorological information and education offices to teach the image processing technique and general characteristics of meteorological satellites.

• 대한공업교육학회지
• /
• 제34권2호
• /
• pp.321-330
• /
• 2009

사출-연신 블로우(injection-stretch blowing) 성형은 양방향 분자배향을 가지는 병(bottle)과 같은 중공 제품을 성형하는데 적용되며, 양방향의 배향은 강화된 물리적 상태량, 탄산음료병과 같은 제품에 중요한 가스 불 투과성 상태량을 제공한다. 사출-연신 블로우 성형 중 분리형(two-stage) 공정은 사출 성형으로 생산된 프리폼을 적외선 히팅 기구로 재 가열하고. 재 가열된 프리폼을 블로우 금형 안에 장착한 후 고압의 공기를 분사시켜 병의 형상을 생성 및 유지하면서 완성시킨다. 그러나 블로우 성형은 연신율이 10배 이상이 되기 때문에 최종 두께 분포를 예측하는 것이 매우 어렵다. 따라서 균일한 두께를 가질 수 있는 프리폼 형상 최적화가 필요하다. 본 연구에서는 블로우 성형 연신 과정에 따라 페트 용기의 두께 변화를 알아보기 위하여 사출-연신 블로우 성형시 두께 편차에 대한 해석을 수행하였으며, 그 결과 첫째 사출-블로우 성형 로우 결과를 이용하여 프리폼 초기 설계를 최적화하였고, 연신 및 블로우 과정에서 공정 편차에용기 두께며, 그 결과 을 수치적으로 로우하여 공정 편를 최적화하였다. 둘째, 사출-블로우 성형시 연신 과정과 동시에 공기를 블로우하는 방법이 용기 두께의 편차를 최소화하였으며, PET용기 제작 기술의 안정화 및 신뢰성을 향상시킬 수 있었다.

• 소성∙가공
• /
• 제11권8호
• /
• pp.682-690
• /
• 2002

The formation of adiabatic shearband in tungsten heavy alloys(WHA) was studied in this investigation. Five prismatic specimens were loaded by high velocity impacts and treated as plane strain problems. To find out the effect of particle's volume ratio, specimens containing 81%, 93% and 97% volume percents of tungsten particles were used. Also the effects of particle's geometry and size on the formation of shearband were studied for 81% volume percent alloys by small size particle model, large size particle model and undulated particle models, and the results were discussed.be used to diagnose the causes of necking and fracture in industrial practice and to investigate whether these defects were caused by material property variation, changes in lubrication, or incorrect press settings. In non-axisymmetric deep drawing, three modes of forming regimes are found: draw, stretch, plane strain. The stretch mode for non-axisymmetric deep drawing could be defined when the major and minor strains are positive. The draw mode could be defined when the major strain is positive and minor strain is negative, and plane strain mode could be defined when the major strain is positive and minor strain is zero. Through experiments the draw mode was shown on the wall and flange are one of a drawn cup, while the plane strain and the stretch mode were on the punch head and the punch corner area respectively, We observed that the punch load of elliptical deep drawing was decreased according to increase of die corner radius and the thickness deformation of minor side was more large than major side.

• 한국군사과학기술학회지
• /
• 제18권3호
• /
• pp.253-259
• /
• 2015

This paper introduces a signal processing technique for discrimination of missile target. In order to detect and discriminate the target, a seeker radar makes use of chirp waveform and stretch processing to generate high resolution range profiles(HRRPs). RELAX(relaxation) algorithm, which is one of the spectral estimation techniques, was used to find scattering centers of a missile from HRRP. From the information on the distribution of one-dimensional(1-D) scattering centers on a target, we can discriminate the target without noise.

• 한국의류학회지
• /
• 제25권6호
• /
• pp.1037-1045
• /
• 2001

This research is done to design and manufacture prototype clean room garments to improve the product yield of the clean room processing. To assist the research, other papers and references on the same subject were collected for analysis. Also the researcher made interviews with the workers at the clean room. The prototype garments made for this project was compared against the commercially available clean room garments used in the industry. A set of test was conducted to measure particle release from the garments. The prototype clean room garments was manufactured after having considered all the aspects stated above, and tested for the level of particle release. The test subjects performed 4 different movements(marching, arms stretch, squat and rise, and jogging) while wearing the prototype garments and commercially available clean room garments. Particle counts produced by each movement were measured. The data collected was statistically analyzed. The followings are the result of the test. 1) Overall, the prototype garments yielded less particle release.(p<0.001) 2) It showed greatest difference of particle counts for jogging(p<0.001) and squat and rise(p<0.001). In the arms stretch test. the prototype garments was also more effective in controling the particle, however, in the marching test. no significant difference was detected. 3) The prototype garments had less particle release in upper(p<0.001), middle(p< 0.001), and lower level(p<0.01) than the commercially available clean room garments. Manufacturing a new fabric for the clean room processing is important, but this research proves that the design of the clean room garments also determines the efficiency garments in the particle control. Therefore the same fabric can perform differently according to how it is designed. Improving the design will also improve the 7article control and reduce the cost of research. Eventually, the manufacturers will increase the product yield.