• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.7
• /
• pp.3123-3131
• /
• 2012

The purpose of this study was to evaluate the timing of precocious puberty and the factors inducing precocious puberty in elemental school girls students of low grades. The 1st, 2nd, and 3rd grade 253 elemental girls students from the Goryong province were randomly selected, G and D elemental school. sexual maturation rate was assessed physical examination by the parents. After obtaining an informed consent, a questionnaire was administered to the parents; sexual maturation rate was assessed by self physical examination, eating habits, lifestyle and home background were evaluated to determine the factors that induced precocious puberty. The data were statistically analyzed. We selected 253 girls: The total percentage of the precocious puberty was 26.1%. 7(7.8%) 6-year-old girls, 9 (13.2%) 7-year-old girls, 50 (52.6%) 8-year-old girls were in breast stage 2 and over. The main factors influencing precocious puberty were obesity scale, frequency of eating instant food, TV watching time, stress levels and broken family. A high rating on the obesity scale and high frequency of eating instant food, too much time in front of TV, high stress and broken family indicated advanced stage of puberty. This study show that prevalence ratio of the precocious puberty was 26.1%. The significant influencing factors in advanced puberty were obesity scale and frequency of instant food, TV watching time, high stress and broken family.

• International Journal of Highway Engineering
• /
• v.6 no.4 s.22
• /
• pp.101-108
• /
• 2004

Asphalt overlay method is a general method to extend the of life old concrete pavements. However, reflection cracks are the typical problem of the AC overlay on distressed concrete pavement. Joint sealing, stress absorbtion layer have been used to prevent reflection cracks however partial success of to delay the timing of reflection cracking was recognized. Reflection crack problem can be eliminated by using rubblization method, which crush concrete pavement slab into piece of aggregate size that can be used base material. Previous research on rubblization method indicated that the size of rubblized PCC ranged 40-70mm at upper layer, and more than 100mm at lower layer. In this study, the adequate depth of rubblized PCC that ran prevent reflection cracking of AC overlay is estimated base on the simulation test of reflection cracking with 0, 10, 20cm rubblized PCC base.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.231-231
• /
• 2017

Drought limits rice production under upland condition. This study quantified the effect of rhizobacteria inoculation on rice root system developmental response to drought and its role in maintaining high soil water use, and dry matter production under drought using NSIC Rc192 (rainfed lowland rice variety). The source of inoculant was Streptomyces mutabilis, a recently isolated rhizobacteria containing plant growth promoting compounds such as ACC deaminase, indole-3-acetic acid and phosphatase (Cruz et al., 2014, 2015). In the first experiment, pre-germination inoculation of seeds with S. mutabilis significantly increased the shoot and root (radicle) length as well as root hair lengths, relative to the non-inoculated control. In the second experiment, rice plants inoculated with S. mutabilis and grown in rootbox with soil generally had greater total root length under drought regardless of the timing of inoculations, relative to the non-inoculated control. Consequently, improved root system development contributed to the increase in soil water uptake under drought and thus, dry matter production. Among inoculation treatments, one-time inoculation of S. mutabilis either at pre-germination or pre-drought stress at 14 days after sowing (DAS), had significantly greater shoot dry matter production than three-time inoculation at pre-germination, at thinning (3 DAS) and at pre-drought (14 DAS). This study demonstrated the effectiveness of rhizobacteria (S. mutabilis) containing growth promoting compounds for enhancing drought dehydration avoidance root traits and improving the growth of rice plants under drought condition.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.1
• /
• pp.145-152
• /
• 2015

Barriers to health seeking constitute a challenging issue in the treatment of breast cancer. The current meta-synthesis aimed to explore common barriers to health seeking among Malaysian breast cancer patients. From the systematic search, nine studies were found meeting the inclusion criteria. Data extraction revealed that health behavior towards breast cancer among Malaysia women was influenced by knowledge, psychological, sociocultural and medical system factors. In terms of knowledge, most of the Malaysian patients were observed to have cursory information and the reliance on the information provided by media was limiting. Among psychological factors, stress and sense of denial were some of the common factors leading to delay in treatment seeking. Family member's advice, cultural beliefs towards traditional care were some of the common sociocultural factors hindering immediate access to advanced medical diagnosis and care. Lastly, the delay in referral was one of the most common health system-related problems highlighted in most of the studies. In conclusion, there is an immediate need to improve the knowledge and understanding of Malaysian women towards breast cancer. Mass media should liaise with the cancer specialists to disseminate accurate and up-to-date information for the readers and audience, helping in modification of cultural beliefs that hinder timing health seeking. However, such intervention will not improve or rectify the health system related barriers to treatment seeking. Therefore, there is an immediate need for resource adjustment and training programs among health professional to improve their competency and professionalism required to develop an efficient health system.

• Journal of Korean Academy of Nursing
• /
• v.49 no.6
• /
• pp.701-712
• /
• 2019

Purpose: Despite the high drinking rates and the complexity of drinking behaviors in adolescents, insufficient attention has been paid to their drinking patterns. Therefore, we aimed to identify patterns of adolescent drinking behaviors and factors predicting the distinct subgroups of adolescent drinking behaviors. Methods: We analyzed nationally representative secondary data obtained in 2017. Our final sample included 24,417 Korean adolescents who had consumed at least one glass of alcohol in their lifetime. To investigate patterns of drinking behaviors, we conducted a latent class analysis using nine alcohol-related characteristics, including alcohol consumption levels, solitary drinking, timing of drinking initiation, and negative consequences of drinking. Furthermore, we investigated differences in demographics, mental health status, and characteristics of substance use across the latent classes identified in our study. To do so, we used the PROC LCA with COVARIATES statement in the SAS software. Results: We identified three latent classes of drinking behaviors: current non-drinkers (CND), binge drinkers (BD), and problem drinkers (PD). Compared to the CND class, both BD and PD classes were strongly associated with higher academic year, lower academic performance, higher levels of stress, suicidal ideation, lifetime conventional or electronic cigarette use, and lifetime use of other drugs. Conclusion: Health professionals should develop and implement intervention strategies targeting individual subgroups of drinking behaviors to obtain better outcomes. In particular, health professionals should consider different characteristics across subgroups of adolescent drinking behaviors when developing the interventions, such as poor mental health status and other substance use among binge and problem drinkers.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.435-446
• /
• 2019

Because offshore structures are affected by various environmental loads, the risk of damage is high. As a result of ever-changing ocean environmental loads, damage to offshore structures is expected to differ from year to year. However, in previous studies, it was assumed that a relatively short period of load acts repeatedly during the design life of a structure. In this study, the residual life of an offshore wind turbine support structure was evaluated in consideration of the timing uncertainty of the ocean environmental load. Sampling points for the wind velocity, wave height, and wave period were generated using a central composites design, and a transfer function was constructed from the numerical analysis results. A simulation was performed using the joint probability model of ocean environmental loads. The stress time history was calculated by entering the load samples generated by the simulation into the transfer function. The damage to the structure was calculated using the rain-flow counting method, Goodman equation, Miner's rule, and S-N curve. The results confirmed that the wind speed generated at a specific time could not represent the wind speed that could occur during the design life of the structure.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.4
• /
• pp.295-309
• /
• 2006

The present study was aimed to evaluate the incidence, etiological factors, and management of cleft lip and palate. Two hundred and twenty patients with cleft lip and/or cleft palate who were treated at Department of Oral and Maxillofacial Surgery, Chonnam National University Hospital, during the period between January 1994 and December 2003 were reviewed. The ratios of cleft lip : cleft lip with cleft palate : and cleft palate were 0.4:1.1:1. Males were more common than females in cleft lip (1.3:1) and cleft lip and palate (2.5:1), while females were more common than males in cleft palate (1:1.3). In the cleft side, left clefts were more prevalent than right clefts (cleft lip 1.3:1, cleft lip and palate 1.6:1). Unilateral clefts were more common than bilateral clefts in cleft lip (79:21). Cleft lip and cleft palate were more common in those with blood type A (34.5%) than those with other types. There was no significant relationship between birth season and frequency of clefts. The clefts were common in the first-born (48.8%), and in mothers aged between 25 and 29 (51.7%). Medication (24.7%) and stress (16.7%) during the first trimester were noted. Positive familial history was noted in 13 cases (5.9%). Thirty-two cases (15%) were associated with other congenital anomalies, in which tonguetie (40.6%) and congenital heart disease (21.9%) were most common. Among 100 patients with cleft palate, 77 patients had middle ear disease (77%), which occurred predominently in the incomplete cleft palate. Seventy-six among the 77 patients received myringotomy and ventilation tube insertion, and the remaining one received antibiotic medication only. Cleft lips were treated primarily at 3 to 6 months, and cleft palates were at 1 to 2 years. Treatment regimens included modified Millard method mainly in the cleft lip, and Wardill V-Y, Dorrance method, and Furlow method in the cleft palate. The percentage of palatal lengthening as type of cleft palate was greater in the incomplete cleft palate group (11.2%) than in the complete cleft palate group (9.6%). The percentage of palatal lengthening as operating method was no difference between the Furlow method (10.9%) and the push back method (10.7%). As postoperative complications, hypertrophic scar was most frequent in the cleft lip, and oronasal fistula in the cleft palate. In summary, it was shown that medication and stress during the first trimester of pregnancy were frequently associated with cleft lip and cleft palate, adequate timing and selection of method of operation are important factors to obtain morphologically and functionally good results. Furthermore prevention and treatment of middle ear disease are important in cleft palate patients because of its high co-occurrence.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.10-19
• /
• 2014

Corrugated steel plates are made by fabricating thin steel plates to have trapezoidal or sinusoidal corrugation, and the corrugated plates are able to maintain high out-of-plane rigidity even when they are used instead of thick flat plates. Also, corrugated steel plates have almost no axial rigidity due to the accordion effect. Thus, if they are applied to the webs of plate girders, designing can be easily conducted so that the webs bear only shear stresses. However, unlike flat plates, the shear buckling of corrugated steel plates has very complex characteristics where buckling occurs due to the interaction of local and global buckling, besides local buckling and global buckling. For the investigation of the cause and characteristics of this interactive buckling, studies on sinusoidal corrugated steel plates are fewer than studies on trapezoidal corrugated steel plates. Therefore, in this study, the shear buckling characteristics of sinusoidal corrugated steel plates and the occurrence pattern of interactive buckling were investigated. For the calculation of shear buckling strength, a finite element program was used, and the analysis results were compared with the exact solution. In addition, the characteristics of buckling stress change and the change of buckling mode shape depending on corrugation thickness and shape parameter were analyzed, and by comparing these results with the results of a theoretical equation, the timing of buckling mode change was analyzed.

• Development and Reproduction
• /
• v.16 no.3
• /
• pp.227-233
• /
• 2012

Circadian timing system plays a major role in a wide range of reproductive function. However it is plausible idea that other environmental and/or internal cue might be simultaneously participated in the optimal regulation of reproductive system. In the present study we extended the reverse feeding (RF) time regimen up to 8 weeks, then measured the general and reproductive indices of the animals. The animals of ad libitum feeding group (Control, CON) have free access to food for 4, 6 and 8 weeks, respectively. The day feeding animals (reverse feeding, RF group) have restricted access to food during daytime (09:00-18:00) for 4, 6 and 8 weeks, respectively. When the feeding schedules were over, key indices were measured. After 4 weeks and 8 weeks of feeding, body weights of animals were not significantly different. However, body weights of 6 weeks RF animals were significantly smaller than those of control animals (CON : RF = $333.46{\pm}12.71$ g : $289.91{\pm}8.31$ g, p<0.01). The blood glucose levels of 4 weeks RF animals were significantly decreased compared to the levels of control animals (CON : RF = $161.4{\pm}2.7$ mg/dL : $176.7{\pm}5$ mg/dL, p<0.01) while the levels of 6 weeks RF and 8 weeks RF animals were not different form those of control animals. Reproductive and non-reproductive tissue weights from 6 weeks RF group were significantly lowered than those from CON group (testis, CON : RF = $1.4714{\pm}0.0174$ g : $1.3724{\pm}0.0168$ g, p<0.001; epididymis, CON : RF = $0.3574{\pm}0.0059$ g : $0.3243{\pm}0.0068$ g, p<0.001; seminal vesicle, CON : RF = $0.1655{\pm}0.0068$ g : $0.1328{\pm}0.0054$ g, p<0.001; prostate, CON : RF = $0.3350{\pm}0.0231$ g : $0.2528{\pm}0.0143$ g, p<0.01). After 4 weeks and 8 weeks of reverse feeding, sperm counts in RF animals were markedly reduced than those in control animals[CON 4W : RF 4W = $121.17{\pm}9.96\;({\times}10^6)$ : $50.86{\pm}9\;({\times}10^6)$, p<0.001; CON 8W : RF 8W= $138.69{\pm}9.8\;({\times}10^6)$ : $108.94{\pm}4.22\;({\times}10^6)$, p<0.001]. Present study indicates that RF may induce an adaptable metabolic stress and cause impairment of androgen-dependent reproductive tissues. On-going longitudinal studies will allow a better understanding of the how does mealtime shift affect the reproductive function and exact nature of adaptation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.47-53
• /
• 2020

The purpose of this study was to increase product reliability by improving the durability of the breech block for a 30mm Automatic Gun. The breech block is a key component of a gun that functions as chambering, closing, and extracting. The breech block requires high reliability, which needs to be improved because cracks of a breech block can occur early in operation. Cause analysis confirmed that the crack is caused by repeated impacts. Therefore, the following improvement measures were studied, and the effects were demonstrated using a firing test. The energy of impact absorption was increased by changing the material, and the stress concentration was mitigated by increasing the value of R. In addition, the fatigue life was increased by adding Shot-peening, deleting chromium plating, and changing the forging method. The firing test did not show firing trouble for up to 5,000 rounds. The start timing of the crack was delayed, and the depth was small. Therefore, the improved product was more durable than the existing product. This study can be used as a useful reference when assessing the improvement of the durability of similar products, life study, and criteria for crack acceptance.