• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.217-224
• /
• 1994

In order to study the shape and dimensions of heart, a procedure to reconstruct a three dimensional left ventricular geometry from two dimensional echocardiographic images was studied including the coordinate transformation, curve fitting and interpolation utilizing three dimensional position registration arm. Nonlinear material property of the left ventricular myocardium was obtained by finite element method performed on the reconstructed geometry and by optimization techniques which compared the computer predicted 3D deformation with the experimentally determined deformation. Elastic modulus ranged from 3.5g/$cm^2$ at early diastole to l53g/$cm^2$ at around end diastole showing slightly nonlinear relationship between the modulus and the pressure. Afterwards using the obtained nonlinear material propertry the stress distribution related with oxyzen consumption rate was analyzed. The maximum and minimum of ${\sigma}_1$ (max. principal stress) occurred at nodes on the second level intersection points of x-axis with endocardium and with epicardium, respectively. And the tendency of the interventricular septum to be flattened was observed from the compressive ${\sigma}_1$ on the anterior, posterior nodes of left ventricle and from the most significant change of dimension in $D_{RL}$ (septal-lateral dimension of right ventricle).

• 한국지반공학회지:지반
• /
• 제13권5호
• /
• pp.5-18
• /
• 1997

공중투하법으로 만든 등방압밀 모래공시체를 평면변형률 압축시험을 실시하여 강도.변형특성의 이방성을 연구하였다. 세계 각국의 주요 연구기관에서 사용되고 있는 7종류의 연구용 표준시공시체를 최대주응력방향(e,)의 변형률과 최소주응력방향(e3)의 변형률을 각각 $10^{-60}에서\; 10^{-2}$ 까지 상세히 측정하였다. 그 결과,실험한 모든 모래에 대하여 변형률 0. 001%이하까지의 변형률에 있어서는 최대주응력이 퇴적면과 이루는 각도 5에 관계없이 탄성적.등방적인 거동을 나타내었다. 그러나, 변형률이 증가하여 탄성한계를 넘어면 점차퍽으로 이방적인 성질을 띄게 되고 마침내 피크에 도달하면 최대내부마찰각 $\phi_{max}은 \delta가\; 90^{\circ}에서 0^{\circ}$로 감소함에 따라 감소하고 그 최소치와 최대치의 비는 0.82-0.90 사이에 있었다. 또, $\phi_{max}$값의 최소치는 모래의 종류에 따라 $ \delta=0^{\circ}-30^{\circ}$ 사이에 있었다. 그러나, 잔류상태에 도달하면 모래는 다시 등방적인 거동을 하여 $\pji는\delta$에 크게 의존하지 않고 거의 일정한 값을 나타내었다.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.8-15
• /
• 2021

Cold forging is a method in which molding is performed at room temperature. It has a high material recovery rate and dimensional precision and produces excellent surface quality, and it is mainly used for the production of bolted or housing products. The lifespan of cold forging molds is generally determined by the wear of the mold, plastic deformation of the mold, and fatigue strength. Cold forging molds are frequently damaged due to fatigue destruction rather than wear and plastic deformation in a high-temperature environment as it is molded at room temperature without preheating the raw material and mold. Based on the results analyzed through FEM, an effective mold structure design method was proposed by analyzing the changes in tensile and compressive stresses on molds according to the number of molds and reinforcement rings and comparing the product geometry and mold stress using three existing mold models.

• 농업과학연구
• /
• 제19권1호
• /
• pp.79-90
• /
• 1992

화강토가 축조재료(築造材料)인 안동(安東)댐에 대하여 FEM에 의한 침하(沈下) 및 응력(應力)을 고찰(考察)해본 결과 다음과 같은 결론(結論)을 얻었다. 1. 안동다목적(安東多目的)댐의 층별(層別) 수직침하는 FEM에 의한 값과 실측치(實測値)가 잘 일치하며, 최대침하(最大沈下)는 중앙부분(中央部分)인 표고(標高) 130m 부근에서 40cm가 발생(發生)했으며 해석치(解析値)는 42cm를 나타냈다. 2. 중심(中心)부근에서의 침하(沈下)크기도 해석결과(解析結果)와 계측치(計測値)가 대체로 일치하며, 심벽부가 가장 크고 다음으로는 투과부(透過部), 안정부(安定部), 석괴부 순으로 나타났다. 3. 수평방향(水平方向)의 변위(變位)는 상류측(上流側)보다 하류측(下流側)에서 더 크게 나타났으며, 이는 상류(上流) 가물막이와 저수위(貯水位)의 영향(影響)으로 인한 결과(結果)로서 하류측(下流側)은 최대(最大) 21cm, 상류측은 17cm 정도가 일어났다. 4. 안동(安東)댐의 응력(應力)은 강성도(剛性度) 차이에 의해서 역(逆)아아칭작용이 발생했으며 이는 여과부(濾過部)의 강성(剛性)이 심벽부(心壁部)의 강성(剛性)보다 적기 때문이라고 판단된다. 5. Zone별(別) 주응력(主應力)값의 비(比)인 Load Transfer Ratio는 1.06 수준(水準)으로 역 아아칭작용이 발생하고 있음을 나타내고 있다.

• 한국작물학회지
• /
• 제44권4호
• /
• pp.321-329
• /
• 1999

The effect of water deficits on soybean [Glycine max (L.) Merr.] could appear on seed quality through changes of morphological plant characteristics. Two Korean genotypes, Hwangkeum (determinate growth habit) and Muhan (indeterminate growth habit), were used to examine the influences of treatment stage and method of water deficit during reproductive growth period on yield and seed quality of soybean. Water deficit at R5 or R6 stages was as damaging to seed quality as double water-deficit treatments at R2+R5 or R2+R6. However, seed from double water-deficit treatment tended to have lower oxidation-reduction potential compare to the corresponding single water-deficit treatment. In comparison with Muhan, Hwangkeum had significantly greater oxidation-reduction potential value. Seed yield per plant in both genotypes depended greatly on seed yield of branches. However, the proportion of number of branch seed to total seed umber in Hwangkeum was increased as the water deficit was applied during later reproductive stage, whereas, in Muhan the proportion was lower. Water-deficit treatments including the single and double water-deficit treatments and non-stressed treatment were able to be classified into five groups for Hwangkeum and four groups for Muhan based on the influences on yield components, number of pod, number of seed, and single seed weight, using principal component analysis. In both genotypes, R2+R5 water-deficit treatment decreased number of pod and seed, but increased single seed weight. On the contrary, R6 or R2+R6 stress increased the pod and seed number, but decreased single seed weight.

• Journal of Mechanical Science and Technology
• /
• 제18권5호
• /
• pp.770-779
• /
• 2004

This paper describes the micro cutting of wear resistant tungsten carbides using PCD (Poly-Crystalline Diamond) cutting tools in performance with SEM (Scanning Electron Microscope) direct observation method. Turning experiments were also carried out on this alloy (V50) using a PCD cutting tool. One of the purposes of this study is to describe clearly the cutting mechanism of tungsten carbides and the behavior of WC particles in the deformation zone in orthogonal micro cutting. Other purposes are to achieve a systematic understanding of machining characteristics and the effects of machining parameters on cutting force, machined surface and tool wear rates by the outer turning of this alloy carried out using the PCD cutting tool during these various cutting conditions. A summary of the results are as follows: (1) From the SEM direct observation in cutting the tungsten carbide, WC particles are broken and come into contact with the tool edge directly. This causes tool wear in which portions scrape the tool in a strong manner. (2) There are two chip formation types. One is where the shear angle is comparatively small and the crack of the shear plane becomes wide. The other is a type where the shear angle is above 45 degrees and the crack of the shear plane does not widen. These differences are caused by the stress condition which gives rise to the friction at the shear plane. (3) The thrust cutting forces tend to increase more rapidly than the principal forces, as the depth of cut and the cutting speed are increased preferably in the orthogonal micro cutting. (4) The tool wear on the flank face was larger than that on the rake face in the orthogonal micro cutting. (5) Three components of cutting force in the conventional turning experiments were different in balance from ordinary cutting such as the cutting of steel or cast iron. Those expressed a large value of thrust force, principal force, and feed force. (6) From the viewpoint of high efficient cutting found within this research, a proper cutting speed was 15 m/min and a proper feed rate was 0.1 mm/rev. In this case, it was found that the tool life of a PCD tool was limited to a distance of approximately 230 m. (7) When the depth of cut was 0.1 mm, there was no influence of the feed rate on the feed force. The feed force tended to decrease, as the cutting distance was long, because the tool was worn and the tool edge retreated. (8) The main tool wear of a PCD tool in this research was due to the flank wear within the maximum value of $V_{max}$ being about 260 $\mu\textrm{m}$.

• 암석학회지
• /
• 제18권4호
• /
• pp.315-336
• /
• 2009

경상분지 북동부 일대의 제3기 결정질 응회암에서 발달하는 미세균열의 빈도수, 길이 및 밀도에 대한 분포특성을 도출하였다. 포항시 흥해읍 지역에서 채취한 3개 암석시료의 수평면 상에서 발달하는 134조의 미세균열은 박편의 확대사진을 통하여 구별하였다. 채취지점의 고도를 달리하는 3개 암석시료에 대한 미세균열의 길이-빈도 히스토그램에 대한 형태의 변화성을 도출하였다. 히스토그램들의 분포형태는 암석시료의 고도와 비례하여 음의 지수함수의 분포형에서 대수-정규의 분포형으로 점변한다. 다른 암석시료보다 고도가 낮은 암석시료 1의 분포형태는 넓은 길이분포를 보여주며, 다른 암석시료에 비하여 평균길이와 중앙값, 그리고 표준 편차가 높은 것이 특징이다. 한편 이와 같은 분포특성은 하부 경상누층군의 퇴적암에서 발달하는 절리의 길이분포와 부합한다. $N0{\sim}10^{\circ}W$의 방향을 중심으로 하여 NW 및 NE의 양쪽 방향으로 갈수록 보다 길이가 짧은 미세균열의 출현빈도수는 증가하며, $N80{\sim}90^{\circ}W$ 및 $N80{\sim}90^{\circ}E$의 방향에서 각각 우세하다. 이러한 분포특성은 미세균열 조들 사이의 생성시기의 상대적인 차이 그리고 보다 짧은 미세균열의 신규 발생을 의미한다. 한편 $N60{\sim}70^{\circ}W$(최대길이:1.18 mm) 및 $N0{\sim}10^{\circ}W$(최대길이:0.80 mm)의 방향에서는 길이가 가장 긴 미세균열을 볼 수 있으며, 이러한 유형의 미세균열은 빈도수에 비하여 숫적으로 매우 제한적이다. 방향각($\theta$)-빈도수(N), 총길이($L_t$), 평균길이($L_m$) 및 밀도($\rho$)의 종합 분포도의 전 영역은 상관곡선의 형태에 의거, 5개의 구간으로 분류할 수가 있다. 분포도에서 밀도곡선은 서북서-동남동($N70{\sim}80^{\circ}W$), 남-북~북북동-남남서($N0{\sim}10^{\circ}W/N10{\sim}20^{\circ}E$), 동북동-서남서($N50{\sim}60^{\circ}E$) 그리고 거의 동-서($N80{\sim}90^{\circ}E$)의 방향에서 각각 5개의 뚜렷한 정점을 보여준다. 특히 단층의 주방향은 밀도가 높은 방향각과 부합한다. 결과적으로 밀도곡선의 이러한 분포형태는 기존의 연구에서 시사한 대표적인 최대 주응력 방향을 반영한다.