• 한국해안·해양공학회논문집
• /
• 제23권4호
• /
• pp.285-291
• /
• 2011

이 연구에서는 신형소파블록을 대상으로 실험 및 수치해석을 수행하여 역학적 성능을 평가하고 적절한 보강재의 배근에 따른 구조성능 향상 효과를 검토하였다. 수치해석을 통하여 신형소파블록에 인장응력이 발생하는 위치와 크기를 예측하여 보강재를 설계하였다. 보강재로는 일반 철근 및 해양환경에 적합하도록 부식과 피로에 장점을 지닌 섬유보강재(FRP)를 사용하였다. 실험을 통하여 보강재가 없는 무근 신형소파블록의 파괴하중은 350 kN으로 소파블록의 자중에 비하여 6.2배로 나타났으며, 철근이나 FRP보로 보강한 실험체는 모두 실험의 최고하중인 900 kN 이상의 강도를 보였다. 위험단면을 통과하는 보강재의 개수는 시공의 편의를 위해서는 굵은 지름의 단일 보강재를 사용하는 것이 유리하지만 가는 지름의 보강재 여러 개를 사용하여 균열 폭을 감소시키는 것이 바람직하다는 결과를 얻었다.

• 한국지반신소재학회논문집
• /
• 제19권1호
• /
• pp.55-63
• /
• 2020

본 연구에서는 다층으로 구성된 깊은 토사지반 내 박스구조물에 대하여 지진하중이 작용할 때 동적거동 특성을 규명하기 위하여 진동대를 이용한 축소모형시험과 유효응력을 고려한 내진해석을 수행하였다. 입력지진파는 장주기파(Hachinohe), 단주기파(Ofunato)와 인공지진파 및 최근 경주 및 포항지역에서 발생한 실지진파 등 5개의 지진파를 사용하여 하부지반에서 작용시켰다. 모형실험 및 수치해석 분석결과, 지진하중 작용시 박스구조물에 발생하는 변위는 연직방향이 수평방향에 비해 크게 발생하였으며, 기초지반 하부의 과잉간극수압 증가가 변위를 유발하는 것으로 확인하였다. 또한, 실지진파에 비해 인공지진파 작용시 지반 및 지중구조물의 동적거동이 크게 나타났다.

• Journal of Korean Biological Nursing Science
• /
• 제21권3호
• /
• pp.178-187
• /
• 2019

Purpose: The purpose of this study was to investigate how college students' perceived stress, cognitive stress, and somatization affect their heart rate variability (HRV). Methods: This study is a cross-sectional survey research on 191 university students, registered at the G University. The perceived stress scale (PSS) and cognitive stress response scale, were used to assess level of stress. The somatization symptom scale of the Symptom Check List 90 (SCL-90), was used to assess level of somatization caused by stress. To assess heart rate variability (HRV), we conducted a five-minute test using a pulse wave analyzer, to analyze short-term HRV. Results: The SCL-90 somatization score had relatively high positive correlation (p< .001) with cognitive stress, but low positive correlation (p< .001) with perceived stress. Cognitive stress response had low negative correlation (p< .001) with 1nSDNN and 1nRMSSD among HRV parameters. Perceived stress was not correlated with HRV. Multiple regression analysis showed that variables of perceived stress, cognitive stress, and somatization symptoms, could not explain HRV. By contrast, one of the HRV indicators, 1nSDNN, was affected by age, gender, and aggressive-hostile thought, the latter being a subscale of the cognitive stress response scale. Conclusion: This study suggests that stress evaluation for people in early adulthood will be more effective, if the evaluation examines cognitive stress and heart rate variability.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 창립총회 및 춘계학술발표회
• /
• pp.37-40
• /
• 2000

Acoustically enhanced soil flushing method is a newly developed in-situ remediation technique. However, there has not been an analytical method that can be used to evaluate the effectiveness of ultrasonic wave under different conditions. This study was undertaken to investigate the degree of enhancement in contaminant removal due to ultrasonic energy on the soil flushing method. The test conditions included different levels of ultrasonic power and hydraulic gradient. The test soils were Ottawa sand, a fine aggregate, and a natural soil, and the surrogate contaminant was a Crisco Vegetable Oil. The test results showed that sonication could increase contaminant removal significantly. Increasing sonication power increased pollutant removal. The faster the flow is, the smaller the degree of enhancement will be. The pollutants in dense soils are more difficult to be removed than in loose soils.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.534-540
• /
• 2001

One approach to testing the suitability of an adhesive joint for a particular application is to build and test to destruct ion a representative sample of the joint. The nondestructive test will not measure strength directly but will measure a parameter which can be correlated to strength. It is therefore, essential that a suitable nondestructive test is chosen and that its results are correctly interpreted. In this paper, typical defects found in adhesive joints are described together with their significance. The limits and likely success of current physical nondestructive tests are described, and future trends outlined.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.152-155
• /
• 2000

PWM inverter-fed traction motor is able to occur problems by additive transient surge stress and harmonic loss in contrast with motor driven by 60Hz sine wave alternating source. Therefore in this paper, test method and standard of existed already were investigate, "thermal + electric" complex degradation test that considered additive degradation occurred by inverter drive carried out in order to obtain insulation reliability of traction motor driven by inverter. It seems that this test method confers large value of application at reliability estimation which the subject of complete motor not windings sample from now on.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2007년 가을학술발표회
• /
• pp.334-344
• /
• 2007

This paper performed a comprehensive evaluation of the results of the 2007 Ground Response Analysis Round Robin Test, at which 14 institutions and individuals participated. The submitted results showed significant discrepancies. The main reason for this difference has been attributed to the dispersion in the estimated shear wave velocity profiles and dynamic soil curves. It is therefore concluded that accurate evaluation of the material properties is of primary importance for reliable estimation of the ground vibration. Evaluation of the effect of the analysis method showed that the equivalent linear analysis overestimates the peak ground acceleration, but overall the results are similar to a total stress nonlinear analysis. However, the total and effective stress nonlinear analyses show distinct discrepancies, the effective stress analyses consistently resulting in a lower response due to the development of the excess pore water pressure and thus softer response.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 춘계학술대회 논문집
• /
• pp.257-262
• /
• 2002

Numerical model introduced in this study combines wave refraction-diffraction, breaking, bottom friction, lateral mixing, and critical shear stress and three sub-models for simulating waves, currents, and bottom change were briefly discussed. Simulations of beach processes and harbor sedimentation were also described at the coast neighboring Bangpo Harbor, Anmyundo, Chungnam, where the area has suffered from accumulation of drifting sand in a small fishing harbor with a wide tidal range. We also made model test for the case of a narrow tidal range at Nakdong river's estuary area to understand the effect of water level variation on the littoral drift. Simulations are conducted in terms of incident wave direction and tidal level. Characteristics of wave transformation, nearshore current, sediment transport, and bottom change are shown and analyzed. We found from the simulation that the tidal level impact to the sediment transport is very important and we should apply the numerical model with different water level to analyze sediment transport mechanism correctly. Although the model study gave reasonable description of beach processes and harbor sedimentation mechanism, it is necessary to collect lots of field observation data, including waves, tides and bottom materials, etc. for better prediction.

• 아동학회지
• /
• 제35권5호
• /
• pp.135-154
• /
• 2014

This study examined the causal relationships between parenting stress and self-efficacy of Korean mothers with an infant according to employment status using the second through fourth wave data of the Panel Study of Korean Children (PSKC). Autoregressive cross-lagged modeling was performed to test the longitudinal reciprocal relationships between the two constructs. Our results indicated that both maternal parenting stress and self-efficacy were consistent over time. The results also indicated that there was a significant cross-lagged effect of maternal parenting stress on their self-efficacy, rather than vice versa. No differences between working and non-working mothers were found in the relationship between the two constructs.

• Geomechanics and Engineering
• /
• 제25권3호
• /
• pp.207-219
• /
• 2021

Several additives are used to enhance the geotechnical properties (e.g., shear wave velocity, shear modulus) of soils to provide sustainable, economical and eco-friendly solutions in geotechnical and geo-environmental engineering. In this study, piezoelectric ring actuators are used to measure the shear wave velocity of unreinforced, fiber, cemented, and fiber reinforced cemented Toyoura sand. One dimensional oedometer tests are performed on medium dense specimens of Toyoura sand-cement-fiber-silica flour mixtures with different percentages of silica flour (0-42%), fiber and cement (e.g., 0-3%) additives. The experimental results indicate that behavior of the mixtures is significantly affected by the concentration of silica flour, fiber and cement additives. Results show that with the addition of 1-3% of PVA fibers, the shear wave velocity increases by only 1-3%. However, the addition of 1-4% of cement increases the shear wave velocity by 8-35%. 10.5-21% increase of silica flour reduces the shear wave velocity by 2-5% but adding 28-42% silica flour significantly reduces the shear wave velocity by 12-31%. In addition, the combined effect of cement and fibers was also found and with only 2% cement and 1% fiber, the shear wave velocity increase was found to be approximately 24% and with only 3% cement and 3% fibers this increased to 35%. The results from this study for the normalized shear modulus and normalized mean effective stress agree well with previous findings on pure Toyoura sand, Toyoura silty sand, fiber reinforced, fiber reinforced cemented Toyoura sand. Any variations are likely due to the difference in stress history (i.e., isotropic versus anisotropic consolidation) and the measurement method. In addition, these small discrepancies could be attributed to several other factors. The potential factors include the difference in specimen sizes, test devices, methods of analysis for the measurement of arrival time, the use of an appropriate Ko to convert the vertical stresses into mean effective stress, and sample preparation techniques. Lastly, it was investigated that there is a robust inverse relationship between α factor and 𝞫₀ exponent. It was found that less compressible soils exhibit higher 𝜶 factors and lower 𝞫₀ exponents.