• Korean Journal of Psychosomatic Medicine
• /
• v.6 no.2
• /
• pp.228-234
• /
• 1998

The importance of psychological factors in dermatologic disorders has been recognized for several decades. However, there have been few reports on the management of psychodermatologic disorders. Psychodermatologic conditions can be divided into three broad subgroup in the dermatologic point of view ; first, psychiatric disorders manifesting as dermatological symptom, second, dermatoses mainly caused by emotional factors, i.e., stress, or determined by complex psychophysiological mechanism, and third, psychological symptoms secondary to dermatological conditions, i.e., anxiety or depression. This article describes first two major categories of psychodermatologic disorders and attempts to provide brief guideline for each psychodermatologic condition in view of the clinical interface between dermatology and psychiatry.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.165-168
• /
• 1998

Re-oxidized nitrided oxides which have been investigated as alternative gate oxide for Metal- Oxide -Semiconductor field effect devices were grown by conventional furnace process using pure NH$_3$ and dry $O_2$ gas, and were characterized via a Fowler-Nordheim Tunneling electron injection technique. We studied Ig-Vg characteristics, leakage current, $\Delta$Vg under constant current stress from electrical characteristics point of view and TDDB from reliability point of view of MOS capacitors with SiO$_2$, NO, ONO dielectrics. Also, we studied the effect of stress temperature (25, 50, 75, 100, and 1$25^{\circ}C$). Overall, our results indicate that optimized re-oxidized nitrided oxide shows improved Ig-Vg characteristics, leakage current over the nitrided oxide and SiO$_2$. It has also been shown that re-oxidized nitrided oxide have better TDDB performance than SiO$_2$ while maintaining a similar temperature and electric field dependence. Especially, the Qbd is increased by about 1.5 times.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.64-75
• /
• 1991

The design of structures of modern industry has developed to satisfy stringent service, realiability and safety. Up to now, geometric profile which means surface foughness and dimension accuracy is mainly treated in manufacturing process of work surface. But it is inevitable to evaluate changes of surface geometry as well as the nature of alterations in surface layers because surface of workpiece changes as a result of phase transformation, chemical changes, plastic deformation and stress changes. This paper is to present principal data for safety design by verifying the effect of grinding conditions and method in grinding layers and to explain the method of measuring surface integrity. In this paper, structural steel(SM20C) is used as a workpiece. Of integrity, surface roughness in view of surface texture is analyzed by frequency domain and residual stress, structures and defect of ground layers in view of surface metallurgy are investigated.

• Proceeding of KASS Symposium
• /
• 2008.05a
• /
• pp.89-94
• /
• 2008

This paper deals with the method of self-equilibrium stress mode analysis of cable dome structures. From the point of view of analysis, cable dome structure is a kind of unstable truss structure which is stabilized by means of introduction of prestressing. The prestress must be introduced according to a specific proportion among different structural member and it is determined by an analysis called self-equilibrium stress mode analysis. The mathematical equation involved in the self-equilibrium stress mode analysis is a system of linear equations which can be solved numerically by adopting the concept of Moore-Penrose generalized inverse. The calculation of the generalized inverse is carried out by rank factorization method. This method involves a parameter called epsilon which plays a critical role in self-equilibrium stress mode analysis. It is thus of interest to investigate the range of epsilon which produces consistent solution during the analysis of self-equilibrium stress mode.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.11 no.1
• /
• pp.45-52
• /
• 2015

Even though a lot of efforts have been devoted to evaluate welding residual stress characteristics of nuclear components, from the view point of accuracy, there are still some arguments in application of engineering estimation schemes. In this paper, three-dimensional finite element analyses (FEA) were carried out to predict residual stress distributions in butt welds of a typical surge line piping. Mesh optimization was conducted and subsequent analysis results such as the axial and hoop stress components along the weld center line and inner wall. Moreover, alternative evaluation was conducted by using three representative equations and their results were compared to those of FEA. Thereby, key parameters affecting to temperature profiles and residual stress distributions were derived as well as an optimum engineering estimation scheme was recommended.

• 대한정형외과스포츠의학회:학술대회논문집
• /
• 2005.04a
• /
• pp.33-34
• /
• 2005

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.11-15
• /
• 2004

Purpose: The aim of this study was to investigate the usefulness of mortise angle and fibular length measured in radiologic findings in predicting the ankle stability. Materials and Methods: One hundred cases fifty cases were randomly selected volunteers with normal ankle function and the other fifty cases were randomly selected patients whose ankle were treated in our hospital and who were followed for over 1 years with good results. A specific experimental fixture were made to get the even AP and lateral view and objective stress view. Results: The mortise angle and fibular length was not statistically significant to the degree of talar tilt angle under valgus or varus stress and that of displacement under anterior or posterior stress. Conclusion: The mortise angle and fibular length was not the objective predicting factors on the ankle stability. Maintenance of constrained talus in dynamic status is most important factors in determining the ankle stability.

• The Journal of Korean Medicine
• /
• v.32 no.4
• /
• pp.48-67
• /
• 2011

Objectives: There has been a lot of controversy about whether Korean traditional medicines cause drug-induced hepatotoxicity or not. However, this controversy has not been examined from a scientific approach, especially in terms of toxicology. Thus, this article for traditional Korean medicine-induced hepatotoxicity was reviewed on a basis of toxicological assessment. Methods: Toxicological assessments were carried out in a view of reactive intermediates formation from biotransformation in animals based on cytochrome P450 activity inducing oxidative stress, and case reports in world-wide. Results and Conclusions: Several herbal materials used for traditional Korean medicines were identified as possible agents causing drug-induced hepatotoxicity. Most of these agents seem to produce toxic reactive intermediates caused by cytochrome P450. Oxidative stress followed by cytochrome P450 activation could also be a reason for herb-induced hepatotoxicity. Plausible prevention of herb-induced hepatotoxicity was suggested.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.1
• /
• pp.47-58
• /
• 2013

Objective: The aim of this study is to review the job stress measurement for applying in nuclear power plants(NPPs). Background: The standard and guideline to evaluate and manage the job stress is insufficient in NPPs. Although job stress might have a negative effect on task performance particularly it can be related with human error in NPPs. Method/Results: This paper considered the objective and subjective stress measurements. One of the questionnaire(Korean Occupational Stress Scale) and the experiment method was investigated to apply in NPPs. KOSS was analyzed about the inter item consistency and correlation with the workload, and relative importance. In the objective evaluation considered the experiment method for the physical and mental job stress and analyzed from the phased point of view. Conclusion/Application: The measurement and criteria to evaluate job stress for operators must be complemented on the job characters and environments in NPPs. This study may support to confirm and manage the job stress in NPPs. The study of more specific methodology on job stress in NPPs is required on the basis of this paper.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.4
• /
• pp.426-432
• /
• 2016

Designing a morphologically well-fitted hip implant to a patient anatomy is desirable to improve surgical outcomes since a commercial ready-made hip implant may not well conform to the patient joint. In this study, biomechanical stability of patient-specific hip implants with two different stem lengths was compared and discussed using a 3D finite element analysis (FEA). The FEA results in this study showed that an increase in stem length brings about more the peaked von-Mises stress (PVMS) in the prosthesis and less in the femur. However the decrease in von-Mises stress in the femur causes stress shielding phenomenon that usually leads to considerable bone resorption. Although, in biomechanical stability point of view, this work recommends the use of smaller stems, the length of stem must be determined by considering both the von-Mises stress and the stress-shielding phenomenon.