• 한국공간구조학회논문집
• /
• 제14권3호
• /
• pp.67-74
• /
• 2014

The author has proposed and verified the accuracy through experiments on a method of measurement through the use of sound waves that not only can quantitatively measure each of the dual directions of the fiber axis with high accuracy of membrane tension created on the surface of the membrane structure, but also can be easily operated in the field of construction. This paper reports the solution for problems of variables caused in the process of downsizing of the measurement equipment in order for practical use, and verifies the correspondence possibility of various stress ratios.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.418-422
• /
• 2005

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire has been investigated. Test pieces were fabricated using die series with different mean and final reduction ratio. Surface residual stresses in the axial direction were measured by X-ray diffraction, Broker's 2-dimensional GADDS system. Results were compared with stress profiles which were calculated by 3D and 2D finite element simulation, Hibbitt's ABAQUS 6.4 program in Finite Element Analysis. By means of FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.

• 소성∙가공
• /
• 제15권2호
• /
• pp.153-157
• /
• 2006

In this study, the die design and die series on the surface residual stress of cold drawn eutectoid steel wire have been investigated. Test pieces were fabricated using die series with different mean and final reduction ratios. Surface residual stresses in the axial direction were measured by X-ray diffraction, Bruker's 2-dimensional GADDS system. The results were compared with stress profiles that were calculated by 3D and 2D finite element simulations, ABAQUS 6.4 program in finite element analysis(FEA). By means of the FEA method, optimal die shape considering delta-parameter were induced and applied in order to determine die sequence designs. Balance of the drawing stresses was also introduced to optimize die sequence.

• 한국정밀공학회지
• /
• 제10권3호
• /
• pp.87-96
• /
• 1993

In this study, the peak stress of a fuillet in elastic structure was optimized to have minimum value by using quadratic isoparametric element. The method of auomatic gridding was also developed along with shape algorithm and design element technique was adopted in selecting design variables. The computer program developed was combined with the Hooke-Jeeves direct algorithm of optimization techniques in order to minimize the peak stress of the fillet. The imployment of design element technique significantly cut down computer time by the reduction in design variables, and the opitmum fillet shape with uniform minimum stress was obtained by varying design variables along x and y directions in improving the shape compared to other results. By using automatic gridding, in which Bezier surfaces and Coons surfaces of cubic interpolation were employed, the irregular boundary was removed resulting in smoother anbd more accurate fillet shape possessing uniform minimum stress.

• 한국지반공학회논문집
• /
• 제15권1호
• /
• pp.5-13
• /
• 1999

말뚝은 타입될 때 가장 큰 응력이 발생하며 이 응력이 말뚝의 허용응력보다 크면 말뚝이 손상 되어 위험을 초래할 수 있다. 따라서 사전에 이를 정확히 예측하여 과도한 항타를 미연에 방지해야 한다. 콘크리트말뚝 타입 시 말뚝에 발생하는 압축응력의 예측방법은 여러 가지가 있으며 현재는 파동이론의 전산해석으로 만족스러운 결과를 얻을 수 있다. 그러나 경우에 따라서는 이 방법의 적용이 곤란할 수 있으며, 이 때에는 간단한 산정식을 적용하는 것이 실용적이다. 본 연구에서는 이 산정식들 중 비교적 합리적이라고 평가되는 산정식들 만을 선정하고 현장에서 실측한 항타응력과 선정된 산정식들로부터 구한 값을 비교, 분석하였다. 그 결과 Uto와 Huyuki의 식이 비교적 정확한 값을 제공하며 지반 및 시공조건에 따라 이 값에 감소계수를 곱하여 수정하면 보다 더 정확한 값을 얻을 수 있음을 알 수 있었다.

• 여성건강간호학회지
• /
• 제25권4호
• /
• pp.423-433
• /
• 2019

Purpose: The study aimed to examine the effects of sleep pattern, stress, and attitude towards menstruation, and behavior that causes a reduction in exposure to endocrine disrupting chemicals (EDCs) in the course of premenstrual syndrome (PMS) in female adolescents. Method: In total, 200 girls attending middle school in K city were recruited via convenience sampling between December 11 and 31, 2018, and 192 subjects were selected for the analysis. Data were analyzed using descriptive statistics, an independent t-test, ANOVA, Pearson's correlation coefficient, and multiple regression. Results: Overall, 9 (4.7%), 152 (79.2%), and 31 (16.1%) students had morning-, intermediate-, and evening-type sleep pattern, respectively. The mean scores for school-related stress were highest. Scores for stress regarding relationships with friends were the lowest. The mean score for attitudes toward menstruation was 72.33 out of 147. The mean score for behavior that led to a reduction in EDCs exposure was 56.57 out of 85. The mean scores for PMS severity were 25.30 and 38.39 out of 60. Analysis of factors affecting PMS revealed that severity of menstrual pain (β=.28), use of analgesics during menstruation (β=.17), family history of PMS (β=-.16), stress (β=.19), and behavior that reduces EDCs exposure (β=-.17) exerted significant effects on PMS. The explanatory power of these variables was 37%. Conclusion: The findings propose the necessity of a health intervention program including educational information, which can reduce PMS in adolescents, induce the behaviors which can decrease exposure to EDCs, and activities for managing the stress levels.

• 한국지반공학회논문집
• /
• 제35권6호
• /
• pp.5-15
• /
• 2019

액상화 평가를 수행할 때 진동전단응력비(CSR)는 일반적으로 지반응답해석 또는 Seed & Idriss의 간편법을 수정한 방법을 통해 산정하고 있다. 본 연구에서는 진동전단응력비 산정방법의 적용성을 분석하기 위하여 1차원 등가선형 지반응답해석을 수행한 후 미연방도로국(FHWA), 일본도로협회(JRA), 국내설계기준(KDS) 등에서 제안한 방법을 적용하여 진동전단응력비를 산정하였다. 연구결과, 국내설계기준(KDS)으로 산정한 진동전단응력비가 해석 결과와 가장 큰 오차를 나타내었다. 그 이유는 국내설계기준의 경우 깊이에 따른 응력감소계수를 최대진동전단응력의 비가 아닌 최대지반가속도의 비로 정의하는 오류가 있기 때문이다.

• Child Health Nursing Research
• /
• 제14권3호
• /
• pp.315-324
• /
• 2008

Purpose: This study was done to determine the effects of a neurofeedback program on brain function and stress in occupational high school students. Method: A nonequivalent control group, non-synchronized with pre-posttest design was used with 62 students. Data collection was done from July to December, 2007. The neurofeedback training was given for 30 minutes at a time, three times a week for 12 weeks. Brain function was measured by brain waves in the frontal lobes of the students and analyzed by eight brain quotients characterizing patterns of EEG rhythms. The instrument used to measure stress was a scale for stress from regular daily life. Results: After neurofeedback training, the level of brain quotients in students in the experiment group increased(t=2.36, p<.05) and the level of stress decreased(t=-3.59, p<.001). Conclusion: The results of the study suggested that a neurofeedback program is effective for brain function improvement and stress reduction in high school students. Therefore, the conclusion of this study is that neurofeedback programs can be useful to increase brain function and decrease stress in occupational high school students.

• 소성∙가공
• /
• 제19권2호
• /
• pp.79-87
• /
• 2010

The Pipe bending process using high frequency local induction heating is an advanced technique to bend pipes with a small bending radius and a large diameter. Even though the pipe bending process is a quite widespread engineering practice, it depends heavily upon trial and error method by field engineers with several years of experience. So it is necessary to develop an integrated methodology for optimum design of the pipe bending process. During hot pipe bending using induction heating, outward wall thickness of a pipe is thinned due to tensile stress and the reduction of wall thickness is not allowed to exceed 12.5%. Taguchi method and dynamic reverse moment is proposed to maintain a reduction ratio of thickness within 12.5%, when D/t ratio is high. An application of the proposed approach was compared with those of the finite element analysis and has good in agreements.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.301-309
• /
• 1995

Shape optimal design of an excavator boom to minimize weight can be formulated as a nonlinear programming problem with an automesh refinement carried out by using the finite element method. The design variables are the radii and the coordinates of the circle to describe the excavator boundary shape. In addition to the displacement and stress constraints, geometric constraints are imposed such that the nodes cannot cross the certain range. The optimum design is obtained by using the PLBA nonlinear programming code. The sensitivity derivatives are calculated using the semi-analytical scheme. Numerical results of an excavator boom show potential for weight reduction of 4.4%(65.6 kgf) when considering the displacement, stress and geometric constraints.