• Computers and Concrete
• /
• v.9 no.3
• /
• pp.215-226
• /
• 2012

This article employs Support Vector Machine (SVM) for determination of fracture parameters critical stress intensity factor ($K^s_{Ic}$) and the critical crack tip opening displacement ($CTOD_c$) of concrete. SVM that is firmly based on the theory of statistical learning theory, uses regression technique by introducing ${\varepsilon}$-insensitive loss function has been adopted. The results are compared with a widely used Artificial Neural Network (ANN) model. Equations have been also developed for prediction of $K^s_{Ic}$ and $CTOD_c$. A sensitivity analysis has been also performed to investigate the importance of the input parameters. The results of this study show that the developed SVM is a robust model for determination of $K^s_{Ic}$ and $CTOD_c$ of concrete.

• Structural Engineering and Mechanics
• /
• v.65 no.1
• /
• pp.99-110
• /
• 2018

The focus of this paper is on the elements with stable open cracks. To analyze plane problems, two triangular elements with three and six nodes are formulated using force method. Flexibility matrices of the elements are derived by combining the non-cracked flexibility and the additional one due to crack, which is computed by utilizing the local flexibility method. In order to compute the flexibility matrix of the intact element, a basic coordinate system without rigid body motions is required. In this paper, the basic system origin is located at the crack center and one of its axis coincides with the crack surfaces. This selection makes it possible to formulate elements with inclined cracks. It is obvious that the ability of the suggested elements in calculating accurate natural frequencies for cracked structures, make them applicable for vibration-based crack detection.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.2
• /
• pp.37-48
• /
• 1998

The popcorn cracking phenomena in plastic IC packages during reflow soldering are investigated by considering the heat transfer and moisture diffusion through the epoxy molding compound(EMC) along with the mechanics of interface delamination. Heat transfer and moisture diffusion through EMC under die pad are analyzed by finite difference method (FDM)during the pre-conditioning and subsequent reflow soldiering pro-cess and the amounts of moisture mass and vapor pressure at delaminated die pad/ EMC interface are calculated as a function of the reflow soldering time. The energy release rate stress intensity factor and phase angle were obtained under various loading conditions which are thermal crack face vapor pressure and mixed loadings. It was shown that thermal loading was the main driving force for the crack propagation for small crack lengths but vapor pressure loading played more significant role as crack grew.

• Computational Structural Engineering
• /
• v.1 no.2
• /
• pp.111-120
• /
• 1988

The behavior of shear crack is investigated analytically to get a better understanding of the fundamental natura of shear failure mechanism in reinforced concrete beams. Emphasis is placed on the exploration of the major cause of the initiation and the propagation of an inclined shear crack in reinforced concrete beams without web reinforcement. By utilizing a finite element method incorporated into a fracture mechanics, the quantitative reponse of reinforced concrete beams with varying amounts of cracking is examined. Progressions of the cracks are simulated. The analysis gives the information of the state of the stresses at various cracking stages. The results are compared with the experimental results.

• Journal of Aerospace System Engineering
• /
• v.1 no.1
• /
• pp.45-52
• /
• 2007

This paper analyzed the extension effects of fatigue life and the application of pre-indentation in aircraft structural material such as aluminum alloys. The test specimen used the thin sheet of aluminum alloy with a single-edged notch. The experiments were conducted after making the pre-crack under a constant amplitude loading. As the fatigue life extension technique, the pre-indentation making an indent on the predicted path of crack propagation was applied. The work presented here discussed about a proper mathematical relation between crack growth rate and the range of stress intensity factor and about the generalization of crack growth mechanism with large retardation effect. A technique to enhance the applicability of pre-indentation if also mentioned.

• International Journal of Aerospace System Engineering
• /
• v.7 no.1
• /
• pp.7-15
• /
• 2020

In this paper the crack growth, modeling, and simulation of the stiffened and un-stiffened cracked panels presented using commercially available finite element software packages. Computation of stresses and convergence of stress intensity factor for single edge notch (SEN) specimens carried out using the finite element method (FEM) and extended finite element method (XFEM) and compared with an analytical solution. XFEM techniques like cohesive segment method and LEFM using virtual crack closure technique (VCCT), used for crack growth analysis and presented results for un-stiffened and stiffened panels considering various crack domain. The non-linear analysis considering both geometric and material non-linearity on stiffened panels with various stringers like a blade, L, inverted T and Z sections the results were presented. Arrived at the optimum stringer section type for the considered panel under axial loading from the numerical analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.6
• /
• pp.138-144
• /
• 2003

A crack in a ferroelectric ceramic subjected to an electric field is analyzed. The boundary of the electrical saturation zone is estimated based on the finite-width saturation zone model, which is analogous to a finite-width Dugdale zone model for mode III. It is shown that the shape and size of the switching zone depends strongly on the boundary of the electrical saturation zone and the ratio of the coercive electric field to the yield electric field. The crack tip stress intensity factor under small scale conditions is evaluated by employing the model of electric nonlinear domain switching. It is found that fracture toughness of the ferroelectric material may be increased or decreased depending on the material property of electrical nonlinearity.

• Journal of Welding and Joining
• /
• v.18 no.4
• /
• pp.104-110
• /
• 2000

An integral equation representation of cracks was presented, which differs from well-known "dislocation layer" representation. In this new representation, an integral equation representation of cracks was developed and coupled to the direct boundary-element method for treatment of cracks in plane finite bodies. The method was developed for in-plane (modes I and II) loadings only. In this paper, the method is formulated and applied to mode III problems involving smooth or kinked cracks in finite region. The results are compared to exact solutions where available and the method is shown to be very accurate despite of its simplicity.implicity.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.28 no.2
• /
• pp.216-227
• /
• 1992

The corrosion rate, behavior of corrosion fatigue and characteristic of cathodic protection for SB41 were investigated by corrosion and corrosion control tests in seawater at laboratory and coast. The main result obtained are as the following; 1) The corrosion rate of base metal (BM) is about 28-37 mg/dm super(2) day in seawater of coast. 2) The correlation between the stress intensity factor range $\Delta$K and crack propagation rate da/dN for weldment follows paris' rule in seawater : da/dN=C($\Delta$K) super(m) where m is the slope of the correlation, and is 2.02 for BM and 1.75 for heat affected zone (HAZ) respectively. 3) The corrosion sensitivity of HAZ is more sensitive than that of BM under the low region of $\Delta$K. 4) With increase of bared surace area of cathode, cathodic protection potential is increased sharply.

• International Journal of Concrete Structures and Materials
• /
• v.5 no.1
• /
• pp.29-33
• /
• 2011

This article employs Least Square Support Vector Machine (LSSVM) for determination of fracture parameters of concrete: critical stress intensity factor ($K_{Ic}^s$) and the critical crack tip opening displacement ($CTOD_c$). LSSVM that is firmly based on the theory of statistical learning theory uses regression technique. The results are compared with a widely used Artificial Neural Network (ANN) Models of LSSVM have been developed for prediction of $K_{Ic}^s$ and $CTOD_c$, and then a sensitivity analysis has been performed to investigate the importance of the input parameters. Equations have been also developed for determination of $K_{Ic}^s$ and $CTOD_c$. The developed LSSVM also gives error bar. The results show that the developed model of LSSVM is very predictable in order to determine fracture parameters of concrete.