• Investigative Magnetic Resonance Imaging
• /
• 제22권2호
• /
• pp.135-139
• /
• 2018

Most capitate fractures occur in association with additional carpal injuries, particularly scaphoid fractures. Isolated fractures of the capitate account for only 0.3% of carpal injuries, and stress fractures are one form of this fracture. We report the case of a 20-year-old male who had a stress fracture of the capitate after serving as an honor guard in the military. Conventional radiographs and computed tomography of the right wrist revealed a minimally displaced fracture line located at the midcarpal aspect of the right capitate. A magnetic resonance imaging scan demonstrates a subarticular capitate fracture with diffuse bone marrow edema, small osteophytes, and irregularity of the midcarpal articular cartilage. We also review the carpal kinematics which possibly caused the stress fracture. Although stress fractures of the capitate are rare, they should also be accounted for with patients who perform repetitive motions of the wrist to a considerable extent.

• Journal of Korean Foot and Ankle Society
• /
• 제16권2호
• /
• pp.87-93
• /
• 2012

Fractures located at the metaphyseal/diaphyseal junction at the base of the fifth metatarsal were first described by Sir Robert Jones in 1902. However, ever since, there has been disagreement and debate regarding the diagnosis, classification, pathomechanics, the incidences, and potential causes of delayed unions and nonunions, and the optimal method of treatment. It appears to be widely agreed that proximal fractures of the metaphyseal/diaphyseal region of the fifth metatarsal are prone to delayed union or even nonunion. Several classifications of proximal fifth metatarsal stress fractures have been devised. Torg et al. classified fractures involving the proximal part of the diaphysis of the fifth metatarsal into three types. The Torg classification is a good grading system that can be used to determine the type of surgery needed as well as for the prediction of prognosis. The ''plantar gap'' might add to the decision-making process for surgery and improve the prediction of patient prognosis. In addition, the new classification using 'plantar gap' might be used for classification of fifth metatarsal stress fracture. Fifth metatarsal stress fractures can be treated conservatively or surgically, and excellent results have been reported for surgery with rapid recovery in athletes. Intramedullary screw fixation has become a popular form of fixation for fifth metatarsal stress fractures. Bone grafting presents the problems of a longer recovery time and additional skin incision for harvesting. The modified tension band wiring is an useful and simple option for surgical treatment of challenging fifth metatarsal stress fractures.

• Journal of Sasang Constitutional Medicine
• /
• 제13권3호
• /
• pp.140-144
• /
• 2001

Severe chronic coughing infrequently causes rib fractures and these fractures belong to Stress fracture and these rib fractures are given the term of "cough fractur". Cough fracture usually occurs in one rib and in the middle of the rib between the costochondral junction and the costal angle. The case is a report about a young woman with multiple rib fractures which were caused by severe coughing. The Chest PA and Rib series test were normal but Rib fractures were founded by Bone scan test. Treatment was Herb-medication, rest and restriction of work and symptoms were reduced.

• Clinics in Shoulder and Elbow
• /
• 제23권2호
• /
• pp.105-108
• /
• 2020

Stress fractures of the acromion and scapular spine are well-known complications following reverse total shoulder arthroplasty. However, these fractures in patients with massive rotator cuff tear or cuff tear arthropathy are extremely rare, and the pathogenesis, clinical features, diagnosis, and treatment of these fractures are poorly understood. We report a case of bilateral stress fracture of the posterior angle of the acromion in a patient with massive rotator cuff tear and discuss the pathogenesis, clinical manifestation, and treatment with a review of the literature.

• Geomechanics and Engineering
• /
• 제17권3호
• /
• pp.295-305
• /
• 2019

The bedding plane has a significant influence on the effect of blasting fragmentation and the overall performance of underground mining. This paper explores the effects of fragmentation of the bedding plane and different angles by using the numerical analysis. ANSYS/LS-DYNA code was used for the implementation of the models. The models include a dynamic compressive and tensile failure which is applied to simulate the fractures generated by the explosion. Firstly, the cracks propagation with the non-bedding plane in the coal with two boreholes detonated simultaneously is calculated and the particle velocity and maximum principal stress at different points from the borehole are also discussed. Secondly, different delay times between the two boreholes are calculated to explore its effects on the propagation of the fractures. The results indicate that the coal around the right borehole is broken more fully and the range of the cracks propagation expanded with the delay time increases. The peak particle velocity decreases first and then increases with the distance from the right borehole increasing. Thirdly, different angles between the bedding plane and the centerline of the two boreholes and the transmission coefficient of stress wave at a bedding plane are considered. The results indicated that with the angles increase, the number of the fractures decreases while the transmission coefficient increases.

• Geomechanics and Engineering
• /
• 제30권1호
• /
• pp.93-105
• /
• 2022

With the exploitation of natural resources in China, underground resource extraction and underground space development, as well as other engineering activities are increasing, resulting in the creation of many defective rocks. In this paper, uniaxial compression tests were performed on rocks with double holes and fractures at different angles using particle flow code (PFC2D) numerical simulations and laboratory experiments. The failure behavior and mechanical properties of rock samples with holes and fractures at different angles were analyzed. The failure modes of rock with defects at different angles were identified. The fracture propagation and stress evolution characteristics of rock with fractures at different angles were determined. The results reveal that compared to intact rocks, the peak stress, elastic modulus, peak strain, initiation stress, and damage stress of fractured rocks with different fracture angles around holes are lower. As the fracture angle increases, the gap in mechanical properties between the defective rock and the intact rock gradually decreased. In the force chain diagram, the compressive stress concentration range of the combined defect of cracks and holes starts to decrease, and the model is gradually destroyed as the tensile stress range gradually increases. When the peak stress is reached, the acoustic emission energy is highest and the rock undergoes brittle damage. Through a comparative study using laboratory tests, the results of laboratory real rocks and numerical simulation experiments were verified and the macroscopic failure characteristics of the real and simulated rocks were determined to be similar. This study can help us correctly understand the mechanical properties of rocks with defects and provide theoretical guidance for practical rock engineering.

• Journal of Korean Foot and Ankle Society
• /
• 제17권1호
• /
• pp.34-39
• /
• 2013

Purpose: To evaluate the effectiveness of intraoperative stress test for diagnosis of occult Lisfranc injury. Materials and Methods: Between April 2009 and October 2012, 21 patients with occult Lisfranc injuries underwent intraoperative stress test and internal fixation. There were 11 males and 10 females with an average age of 45.3 years (range, 23~79 years). Injuries were caused by traffic accident in 10 cases, indirect force (twisting injury) in 8 cases, and crush in 2 cases, falling from a height in 1 case. Unstable injuries on stress radiograph in occult injury of Lisfranc joint were treated by open reduction or closed reduction and fixation with cannulated screw or K-wire. Radiological evaluation was assessed according to preoperative and postoperative diastasis between $1^{st}$ and $2^{nd}$ metatarsal base. Results: Assoicated injuries were 9 cases of metatarsal fractures, 6 cases of cuneiform fractures and 6 cases of both metatarsal and cuneiform fractures. Medial and middle column fixation was in 13 cases, and three columns fixation was in 8 cases. Initial diastasis between $1^{st}$ and $2^{nd}$ metatarsal base was 2.8 mm (1.3~4.7 mm) on AP radiograph and postoperative diastasis between $1^{st}$ and $2^{nd}$ metatarsal base was 1.2 mm (0.5~2.4 mm) on AP radiograph. Conclusion: Even there is no sign of clear Lisfranc injury, it is necessary to pay attention and give evaluation on circumstances of occult Lisfranc injuries with metatarsal or cuneiform fractures. Intraoperative stress test is helpful to diagnose an occult Lisfranc injury. For unstable injuries on stress radiographs of occult Lisfranc joint injury, operative treatment with open or closed reduction and internal fixation is useful method.

• Journal of the Korean Orthopaedic Association
• /
• 제54권3호
• /
• pp.287-291
• /
• 2019

Although acute traumatic fractures of the clavicle are relatively common, stress fractures of the proximal clavicle are extremely rare. Stress fractures of the clavicle have often been reported after a radical neck dissection or radiation but rarely occur during excessive repetitive exercise in professional athletes. The authors report a case of a stress fracture of the proximal clavicle during exercise in a young man with no specific preceding factors, which has not been reported in the Korean literature.

• Clinical Pain
• /
• 제18권2호
• /
• pp.126-129
• /
• 2019

Bilateral femoral neck stress fractures have been rarely reported. When diagnosed, they are usually limited to athletes or military personnel. A 35-year-old man, previously healthy, visited the emergency department for right inguinal pain. On physical examination, no external wound, tenderness or limitation of motion were found in either lower extremity. Plain radiography showed normal findings but an magnetic resonance image showed a linear fracture in the femoral neck. In this case, bilateral femoral neck stress fractures were found in a young non-athlete adult with no prior medical history of related injuries. Surgery is generally not performed for stress fractures but considering the patient's early mobilization and the need for quick reintegration into society, surgery was done in this case.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제28권6호
• /
• pp.464-471
• /
• 2002

The purpose of this study was to evaluate the stress patterns within fractured mandibles generated by reduction forceps and to determine the optimal position of the reduction forcep. Twenty-seven mandibular models were fabricated using a photoelastic resin. Each of the three sets of mandible models prepared was osteotomized according to one of three different fracture types(symphysis, parasymphysis and body fractures). After reducing the cut segments, a reduction forcep was placed into different engagement holes to compress the segments. Photoelastic stress analysis was used to visualize the stress patterns within the fractured mandiblular models generated by the reduction forcep. In the case of symphysis or parasymphysis fractures, an optimum distribution of stress over the fracture site was achieved when placing the reduction forcep more than 12.5mm on either side of the fracture line between the midway level bisecting the mandible and 5mm below the level. In the case of body fractures, optimum stress distribution was achieved when the reduction forcep was placed more than 15mm from the fracture line on the midway level. In conclusion, a correct use of reduction forceps helps to provide a precise threedimensional reduction for mandibular fractures.