• 한국공작기계학회논문집
• /
• 제11권3호
• /
• pp.65-71
• /
• 2002

Friction welding has may merits such as energy efficiency, simple processing, etc. but it is difficult to obtain good welding at the welded interfaces and heat affected zone. It is discovered that stress singularity exists at the interferes and heat affected zone. The computer program based on boundary element method is utilized in this study. A mathematical model is implemented based on results from several experiments performed at and around the welded interfaces and heat affected zone of disimilar metals under static and dynamic loadings. This stay is to investigate the characteristics of the deformation and fracture behavior around interfaces for friction welded materials under static tensile load. Also, the stress distribution at the tip of crack is analyzed by using BU based on Kelvin's solution of 2-dimensional binding zone. The results of BEM are identical with those in case of considering interfaces of both heat affected zone. Also, stress singularity at the tip of interfaces appears when the elastic modulus ratio is 1.07.

• Structural Engineering and Mechanics
• /
• 제14권5호
• /
• pp.565-574
• /
• 2002

This paper presents a method for predicting premature separation of carbon fiber reinforced plastic (CFRP) plates from strengthened steel beams. The fracture criterion based on material-induced singularity is formulated in terms of a singular intensity factor. Static test on double strap joints was selected to provide the critical stress intensity factor in the criterion because good degree of accuracy and consistency of experimental data can be expected compared with the unsymmetrically loaded single lap joints. The debond/separation loads of steel beams with different CFRP lengths were measured and compared with those predicted from the criterion. Good agreement between the test results and the prediction was found.

• 마이크로전자및패키징학회지
• /
• 제7권4호
• /
• pp.31-35
• /
• 2000

반도체 칩과 리드프레임을 접착하고 있는 얇은 접착제층에 전단하중이 가해질 때 발생하는 응력상태를 조사하고 있다. 계면 응력상태를 해석하기 위해서 경계요소법이 사용되고 있다. 선형 탄성이론을 적용하여 해석하면, 강체와 접착제의 계면이 자유 경 계면과 만나는 부분에서 $\gamma^{\lambda=1}$(0<1<1) 형태의 응력 특이성이 존재한다. 이러한 특이성으로 인해, 모서리 균열이나 계면 박리가 발생할 수 있다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권4호
• /
• pp.494-502
• /
• 2003

The near-tip field of mode-I dynamic cracks steadily propagating in a strain softening material is investigated under plane strain conditions. The material is assumed to be incompressible and its deformation obeys the $J_2$ flow theory of plasticity. A power-law stress-strain relation with strain softening is adopted to account for the damage behavior of materials near the dynamic crack tip. By assuming that the stresses and strain have the same singularity at the crack tip. this paper obtains a fully continuous dynamic crack-tip field in the damage region. Results show that the stress and strain components the same logarithmic singularity of (In(R/r))$\delta$, and the angular variations of filed quantities are identical to those corresponding to the dynamic cracks in the elastic-perfectly plastic material.

• 한국전산구조공학회논문집
• /
• 제13권1호
• /
• pp.97-103
• /
• 2000

이 논문에서는, 반도체 칩과 리드프레임을 결합하는 과정에서 점탄성 접착제층에 발생하는 잔류응력 문제를 다루고 있다. 접착제층은 “열유동단순”거동을 한다고 가정하였다. 접착제층에서의 응력들은 경계요소법을 사용하여 조사하였다. 매우 큰 응력 구배가 계면 모서리에서 발생하는데, 그러한 응력들은 국부 항복을 일으키거나, 칩과 리드프레임의 박리를 야기시킬 수 있음을 보여주고 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.747-750
• /
• 1997

Using complex potentials and the concept of repeated roots for general solutions, logarithmic stress singularities and coefficient vectors for v-notched cracks in isotropic dissimilar materials are evaluated and demonstrated to have no influence on the logarithmic stress singularities.

• 대한기계학회논문집
• /
• 제15권1호
• /
• pp.179-189
• /
• 1991

본 연구에서는 특성근이 같은 같은 경우의 기본해 유도에서 사용하였던 상사 방법을 이용하여, 균열끝 부근의 응력장과 변위장을 나타내고자 한다. 위의 해석을 바탕으로 개발한 프로그램의 정도에 대하여 검증하고, 이 프로그램을 복합재료 내의 균열 문제에 응용하여 응력확대계수에 관한 자료를 계산하고, 그 유용성을 검토하고자 한다.

• 소성∙가공
• /
• 제13권6호
• /
• pp.484-489
• /
• 2004

This paper employed a systematic analysis using a 2-D hybrid special finite element containing an edge crack in order to describe the fracture behavior of spot-welds in automotive structures. The 2-D hybrid special finite element is derived form a mixed formulation with a complex potential function with the description of the singularity of a stress field. The hybrid special finite element containing an edge crack can give a better description of its singularity with only one hybrid element surrounding one crack. The advantage of this special element is that it can greatly simplify the numerical modeling of the spot welds. Some numerical examples demonstrate the validity and versatility of the present analysis method. The lap-shear, lap-tension and angle-clip specimens are analyzed and some useful fracture parameters such as the stress intensity factor and the initial direction of crack growth are obtained simultaneously.

• 대한기계학회논문집
• /
• 제13권6호
• /
• pp.1183-1192
• /
• 1989

본 논문에서는 평면변형률 상태하에서 안정하게 성장하는 균열선단에 집중 되어있는 강소성역의 해석에 역점을 두어 재결정법과 탄.소성유한요소법을 도입하여 안정 성장균열 선단에 형성되는 균열 성장저항에 직접적인 영향을 미치고 있는 소성 역의 크기나 형태에 대한 실험 및 해석을 하였다.

• Structural Engineering and Mechanics
• /
• 제5권6호
• /
• pp.705-713
• /
• 1997

The residual thermal stresses at the interface corner between the elastic fiber and the viscoelastic matrix of a two-dimensional unidirectional laminate due to cooling from cure temperature down to room temperature were studied. The matrix material was assumed to be thermorheologically simple. The time-domain boundary element method was employed to investigate the nature of stresses on the interface. Numerical results show that very large stress gradients are present at the interface corner and this stress singularity might lead to local yielding or fiber-matrix debonding.