• Journal of Plant Biotechnology
• /
• 제40권1호
• /
• pp.49-54
• /
• 2013

C3HC4-type RING zinc finger proteins essential in the regulation of plant processes, including responses to abiotic stresses. We previously isolated and examined the C3HC4-type RING zinc finger protein (BrRZFP1) from Brassica rapa under abiotic stresses. To elucidate the role of the BrRZFP1 transcription factor in gene regulation, we transformed tobacco plants with the BrRZFP1 gene. Plants were regenerated from 82 independently transformed callus lines of tobacco and analysed for transgene expression. Transgene integration and expression was confirmed by Southern and RT-PCR analyses, respectively. T2 plants displayed more tolerance to the bacterial pathogens Pectobacterium carotovorum and Ralstonia solanacearum, and the tolerance levels were correlated with BrRZFP1 expression levels. These results suggest that the transcription factor BrRZFP1 is an important determinant of stress response in plants and its overexpression in plants could increase biotic stress resistance.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.48-56
• /
• 2003

This paper has developed an efficient nonlinear finite element method that covers both initial deformations and initial stresses of general distribution in calculating the ultimate strength of ring-stiffened cylinders. The developed method and two widely-used commercial codes (NASTRAN and ABAQUS) were simultaneously applied to the same analysis model within the extent of those commercial codes' coverage to check the validity of the present method. After the validity check, it was used for parametric studies for more general cases of initial stress distribution, which produced some useful information about the imperfection sensitivity of the ultimate strength of ring-stiffened cylinders.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.255-258
• /
• 1998

In this paper. we designed and simmulated a ring-dot type piezoelectric transformer. As the result, piezoelectric transformer of 25${\times}25{\times}3.5mm$ size (Dot electrode diameter of Ilmm) show the maximum displacement, stress and output power. When the Input voltage of piezoelectric transformer was 155V. Output voltage show 30V and output power 9W at the load resistance of $100\Omega$

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.369-370
• /
• 2008

This paper describes the electric field distribution of high voltage polymer bushing with inner field shaper designs. The field control can be achieved by means of the designs of such internal field shaper. But high electric stress occurred between field shaper and central conductor by the closely space. In accordance, the floating and ring shield designs was importance for electric stress grading at critical parts of the bushing. The bushing has a central conductor, and internal ring shield or floating shield, gaps are formed between field shaper and ring shield. Accordance equipotential lines extend through gaps. Maxwell 2D simulator based on the boundary element method was also introduced in order to verify the reliability of the polymer bushing.

• International Journal of Ocean Engineering and Technology Speciallssue:Selected Papers
• /
• 제6권1호
• /
• pp.51-59
• /
• 2003

This paper has developed an efficient nonlinear finite element method that covers both initial deformations and initial stresses of general distribution in calculating the ultimate strength of ring-stiffened cylinders. The developed method and two widely-used commercial codes (NASTRAN and ABAQUS) were simultaneously applied to the same analysis model within the extent of those commercial codes' coverage to check the validity of the present method. After the validity check, it was used for parametric studies for more general cases of initial stress distribution, which produced some useful information about the imperfection sensitivity of the ultimate strength of ring-stiffened cylinders.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2000년도 암반공학문제의 수치해석(Numerical Analysis in Rock Engineering Problems)
• /
• pp.63-66
• /
• 2000

링 시험펀의 크기와 편심에 따른 응력변화를 FLAC으로 분석하였다. 분석 결과 중공의 크기가 일정한 범위에서만 안정된 값을 얻을 수 있었다. 중공의 크기 오차를 줄이기 위한 상대 공반경은 약 0.3이 적절할 것으로 평가되었다. 한편 중공의 관심 오차가 커지면 응력분포가 불균일하게 되어 정확한 인장강도 산정이 어려운 것으로 사료되었다. 적절한 인장강도를 얻기 위해 중공의 편차는 일정한 정도로 한정하여야 할 것으로 생각된다. 편심으로 인한 오차를 10% 이내로 제한하기 위해서는 중공의 중심은 가압방향에 수평한 방향으로 3%, 수직한 방향으로는 10% 이내가 되어야 하는 것으로 분석되었다.

• 터널과지하공간
• /
• 제10권3호
• /
• pp.316-319
• /
• 2000

링 시험편의 크기와 편심에 따른 응력변화를 FLAC으로 분석하였다. 분석 결과 중공의 크기가 일정한 범위에서만 안정된 값을 얻을 수 있었다. 중공의 크기 오차를 줄이기 위한 상대 공반경은 약 0.3이 적절할 것으로 평가되었다. 한편 중공의 편심 오차가 커지면 응력분포가 불균일하게 되어 정확한 인장강도 산정이 어려운 것으로 사료되었다. 적절한 인장강도를 얻기 위해 중공의 편차는 일정한 정도로 한정하여야 할 것으로 생각된다. 편심으로 인한 오차를 10% 이내로 제한하기 위해서는 중공의 중심은 가압방향에 수평한 방향으로 3%, 수직한 방향으로는 10% 이내가 되어야 하는 것으로 분석되었다.

• Tribology and Lubricants
• /
• 제15권4호
• /
• pp.297-303
• /
• 1999

O-rings in automotive engines are important components such as a coolant pipe, engine oil circulating lines and fuel injector for sealing that makes efficient performance of the engine. Life cycle of O-rings is effected in environments of the O-ring seal, like that applied pressure, working temperature, precompressed ratio and materials. It is related in extrusion, expansion and fatigue failure of O-rings. In this paper, an pressurized, compressed elastomeric O-ring inserted into a rectangular groove is analysed numerically using the nonlinear finite element method. The calculated FEM results showed that extrusion ratio and contact stress are strongly related to the gap clearance and edge radius of the groove.

• 한국정밀공학회지
• /
• 제26권2호
• /
• pp.86-93
• /
• 2009

Elastomeric O-rings have been the most common seals due to their excellent sealing capacity, and availability in costs and sizes. One of the critical applications of O-ring seals is solid rocket motor joint seal where the operating hot gas must be sealed during the combustion. This has long been a design issue to avoid the system failure. For laterally constrained, squeezed and pressurized condition, deformed shape of O-ring was measured by computed tomography method and CCD laser sensor, compared with numerical calculations. As clearance gap changes, sealing performance had been evaluated on peak contact stresses at top, bottom and side contact surfaces. As clearance gap increases, peak contact stresses and contact widths in top and side contact surfaces increase, and the asymmetry of stress distributions is promoted due to pressure increase. It is suggested that peak stress of bottom contact surface can be approximated by simple superposition of peak ones due to squeeze and pressure. Under pressurized condition, sealing performance is dependent on not peak stresses of bottom and side contact surfaces but that of top.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.85-89
• /
• 2004

The inner side between HP stationary blades in #1 turbine of Nuclear Power Plant A is damaged by the FAC(flow assisted corrosion) which is exposed to moisture. For many years the inner side is repaired by welding the damaged part, however, FAC continues to deteriorate the original material of the welded blade ring. In this study, we have two stages to verify the integrity of stationary blade ring in nuclear power plant A. In the stage I, replication of blade ring is performed to survey the microstructure of blade ring. In the stage II, the stress analysis of blade ring is performed to verify the structural safety of blade ring. Throughout the two stages analysis of blade ring, the stationary blade ring had remained undamaged.