• 한국세라믹학회지
• /
• 제36권10호
• /
• pp.1080-1086
• /
• 1999

Mullite/zirconia composite was synthesized by adding zirconia and Zircon to mixture of Hapcheon kaolin(grade pink A) and aluminium nitrate salt in order to enhance strength of the mullite specimens. Kaolin and aluminium nitrate salt was mixed milled and calcined at 100$0^{\circ}C$ and then 5wt% mullite seed was added to increase mullite content. The influence of the additives(ZrO2 and ZrSiO4) and sintering temperature on the strength of the sintered specimens was investigated. The flexural strength of the specimens containing 10wt% zirconia was enhanced from 150MPa without the additive up to 300MPa after heat treatment at 156$0^{\circ}C$ In the case of addition of 15wt% zircon the strength of the specimens systhesized at 1$600^{\circ}C$ was 225 MPa.

• 국제물리치료학회지
• /
• 제10권4호
• /
• pp.1868-1872
• /
• 2019

Background: Lower trapezius muscle function is important for the prevention and treatment of shoulder injuries. However, scapular posterior tilt movement has been overlooked in lower trapezius strengthening exercise programs. Objective: To examine the effects of prone arm lifting with scapular posterior tilt (PALSPT) on trapezius muscles. Design: Crossover study Methods: 17 healthy males were recruited for participation in this study. Participants performed backward rocking diagonal arm lifting (BRDAL) and PALSPT. To train participants in scapular posterior tilt movements for PALSPT, visual biofeedback of scapular movements was provided using a motion sensor. Electromyography (EMG) activities of the middle and lower trapezius were recorded using a surface EMG system. Differences in middle and lower trapezius muscle activity between BRDAL and PALSPT exercises were analyzed. Results: Lower trapezius muscle activity was significantly greater during PALSPT than during BRDAL (p=.006). Although greater EMG activity was observed in the middle trapezius during PALSPT than during BRDAL, this difference was not significant (p=.055). Conclusions: The results of the present study indicate that scapular posterior tilt movements must be considered in lower trapezius muscle strengthening programs.

• 한방안이비인후피부과학회지
• /
• 제12권2호
• /
• pp.104-121
• /
• 1999

The results were as follows ; 1. The treatment method is most used reinforcing the spleen and strengthening of Ki(氣) detoxication and draining of pus on each stage. In first stage, the method of actirating blood and aeration of Lag(絡) nourishing blood and moisturizing skin is used. In ulcer stage, the method of expelling blood stasis and detoxication, promoting pus and drainage is used. In chronic stage, strengthening of Ki(氣) and blood, invigiration and dispersion is used. 2. In the frequency of prescription, the most numerous prescription is Paljintang(八珍湯) and the next are Insamyangyoungtang(人蔘養榮湯). Taglisodongum(托裏消耗飮) ect. In the frequency of medicine the most numerous medicine is Angelicae Gigantis Radix(當歸) and the next are Glycyrrhizae Radix (甘草), Astragali Radix(황기) etc. 3. In the frequency of prescription of exteral therapy. the most numerous prescription is Saengioghongo(生肌玉紅膏), Saengisan(生肌散) and the next are hongsungdan(紅升丹), guildan(九一丹) etc. In the frequency of medicine of exteral therapy, the most numerous medicine is Glycyrrhizae Radix (甘草) and the next are Calomelas(輕粉), Draconis Resina(血竭) etc.

• Journal of Oral Medicine and Pain
• /
• 제47권2호
• /
• pp.95-101
• /
• 2022

Temporomandibular joint osteoarthritis (TMJ OA) causes destruction of the temporomandibular joint (TMJ) and can lead to occlusal changes such as anterior open bite in some patients. Consequently, these patients may experience difficulty in chewing food items and exhibit abnormal functional habits such as bruxism, preventing healing of the TMJ condyles. Treatment protocols include the use of traction appliances to reduce stress on the condyles. Unstable occlusions can lead to weakness of the masticatory muscles which, in turn, worsen the occlusal changes and complicate pain management. Therefore, the current study evaluated the condition of the masseter muscle using ultrasonography and educated patients on the execution of gum-chewing exercises for muscle strengthening. It also aimed to assess the effects of traction appliances and strengthening exercises on the masticatory muscles of patients with occlusal changes caused by TMJ OA.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.178-178
• /
• 2016

Every display is equipped with a cover glass to protect the underneath displaying devices from mechanical and environmental impact during its use. The strengthened glass such as Gorilla glass.$^{TM}$ has been exclusively adopted as a cover glass in many displays. Conventionally, the strengthened glass has been manufactured via ion-exchange process in wet salt bath at high temperature of around $500^{\circ}C$ for hours of treatment time. During ion-exchange process, Na ions with smaller diameter are substituted with larger-diameter K ions, resulting in high compressive stress in near-surface region and making the treated glass very resistant to scratch or impact during its use. In this study, PIIID (plasma immersion ion implantation and deposition) technique was used to implant metal ions into the glass surface for strengthening. In addition, due to the plasmonic effect of the implanted metal ions, the metal-ion implanted glass samples got colored. To implant metal ions, plasma immersion ion implantation technique combined with HiPIMS method was adopted. The HiPIMS pulse voltage of up to 1.4 kV was applied to the 3" magnetron sputtering targets (Cu, Ag, Au, Al). At the same time, the sample stage with glass samples was synchronously pulse-biased via -50 kV high voltage pulse modulator. The frequency and pulse width of 100 Hz and 15 usec, respectively, were used during metal ion implantation. In addition, nitrogen ions were implanted to study the strengthening effect of gas ion implantation. The mechanical and optical properties of implanted glass samples were investigated using micro-hardness tester and UV-Vis spectrometer. The implanted ion distribution and the chemical states along depth was studied with XPS (X-ray photo-electron spectroscopy). A cross-sectional TEM study was also conducted to investigate the nature of implanted metal ions. The ion-implanted glass samples showed increased hardness of ~1.5 times at short implantation times. However, with increasing the implantation time, the surface hardness was decreased due to the accumulation of implantation damage.

• 보건행정학회지
• /
• 제24권1호
• /
• pp.24-34
• /
• 2014

Background: Bankrupted households have recently been increased due to excessive medical expenditure in Korea. They have not been protected from economic risk when household's member has severe diseases that need a lot of money for treatment. Purpose of this study examines policy effect by comparing unmet needs' change of policy object households and non-object groups. Methods: We used Korea Health panel 2nd 4th data collected by Korea Institute for Health and Social Affairs and National Health Insurance Service. Analysis subjects were 381 households (pre-policy) and 393 households (post-policy) that had cancer and cardiovascular and cerebrovascular diseases. Since it was major concern that estimates benefit strengthening policy started by certain time, we setup comparing households which had diabetes, hypertension disease. Comparison subjects were 393,247 households, respectively and we evaluated policy effect using difference in difference (DID) model. Results: Although unmet needs of policy object households were higher than non-object groups, policy execution variable affected negative direction. But interaction-term which shows pure effect of policy was not statistically significant. We utilized multi-DID model to examine factors affecting unmet needs causes. Copayment assistance policy did not significantly affect households that responded to 'economic reason,' and 'no have time to visit' for unmet needs causes. Conclusion: The second copayment assistance policy did not significantly give positive effect to beneficiary households than non-beneficiary groups. When we consider that primary purpose of public insurance guarantee high medical expenditure occurred by unexpected events, it needs to deliberate on switch of benefit strengthening policy that can assist vulnerable people. Also, we suggest that government forward a policy covering non-reimbursable medical expenses as well as switch of benefit strengthening direction because benefit policy do not affect non-covered medical cost which accounts for quarter of total health expenditure.

• 의료법학
• /
• 제9권1호
• /
• pp.319-382
• /
• 2008

As a withdrawing care's study, the purpose of this study is searching about withdrawing care's acceptance and circumstances through Bora-mae hospital case(chapter 1). Withdrawing life-sustaining treatment has various forms. Though the meaning of euthanasia, death with dignity, natural death, physician assisted suicide are duplicated, the meaning of those are different slightly. Firstly, this study looks about the difference of the those meaning and acceptance range(condition) by withdrawing care's forms(chapter 2). Bora-mae hospital case sentenced guilty about physician who discharged incompetent patient who was after surgery by patient's wife determination. This Bora-mae case that sentenced guilty about discharge against medical advise(DAMA) that is regarded to custom has brought intensive confliction of legal, social, medical aspect, Bora-mae hospital case has many legal problems. First, as to criminal law rule 250(murder), the problem is whether discharge and withdrawing life-sustaining treatment is commission or omission. this study concluded omission(district court: omission, appeal, supreme court: commission). Because legal denounce point of discharge and medical treatment withdrawing is omission that physician who is obligatory on patient to cure. If physician's act is regarded omission, it is necessary to determine whether he has guardian status and obligation. Without guardian status and obligation, omission crime can't exist. This study decided that physician had guardian status and obligation and foundation of guardian status was pre-action or acceptance of emergency patient. Physician's medical treatment duty finished when patient(or patient's guardian) demands discharge. But when patient death is foreseen and other possible treatment does not exist, his duty of life prolonging treatment does not finish. This originate from physician's social responsibility and public status that limits patient's private liberty. This study regarded physician's action as accomplice about whether physician's discharging action is accomplice or the principal offender(district court: the principal offender, appeal, supreme court: accomplice). Though the principal offender needs criminal determination and action, there is no this common determination and functional action control of physician in Bora-mae case(chapter 3). Bora-mae hospital case partly originated from deficiency of legal, institutive system including medical security system shortage, the instruction is 1. medical security system strengthening, 2. hospital ethical committee's activity strengthening, 3. institutionalization of withdrawing life-sustaining treatment, 4. acceptance of pre-decision making system, 5. sufficient persuasion of physician for patient and faithful writing of medical paper, 6. respect for patients' self-determination and rights, 7. consciousness's changing for withdrawing life-sustaining treatment and persistent education about medical ethics(chapter 4). Considering Bora-mae case, medical sector is not the dead ground of a criminal punishment. Intervention of criminal law in medical sector give rise to ill effect, that is, excess medical examination and treatment, safeguard treatment, delay of discharge from a hospital. Because sufficient guarantee of life becomes mere empty slogan under situation that impose a burden of heavy cost to family or hospital, public and systematic solution should be given(chapter 5).

• 열처리공학회지
• /
• 제33권6호
• /
• pp.277-283
• /
• 2020

Cu-Co-Si based alloy has a strengthening mechanism for Co₂Si intermetallic compounds deposited on the copper matrix after aging treatment and the solution treatment has a key influence on the strength and electrical conductivity of the final products. In this paper, the Cu-1.6%Co-0.38%Si alloy was fixed at the time and the solution treatment temperature was set at a temperature in the range of 800 to 950℃, and the change in mechanical properties was observed by fixing the temperature at 950℃ and changing the time. The microstructure was observed using an electron microscope and an optical microscope, and the changes in hardness, electrical conductivity, and bending workability after aging treatment were investigated. When the solution treatment time is less than 20 seconds, the solution treatment is not sufficient and the formation of precipitates contributing to the increase in hardness decreases and the hardness decreases after the aging treatment, and in more than 50 seconds, the hardness decreases due to the coarsening of the grains and the bending workability got worse.

• 대한한방소아과학회지
• /
• 제16권1호
• /
• pp.181-202
• /
• 2002

Anorexia is one of the most common childhood-onset symptom and is Icing-term progress. Public interest in anorexia has increased along with debate concerning painless treatment. This study was progressed for oriental medical treatment for anorexia in china. The purpose of this study is current oriental medical approach to anorexia. Anorexia was named 'yanshizheng(厭食症)' in chinese medicine. The study for anorexia in china consist of basic, clinical, experimental study. In the oriental medicine, the reason of anorexia is weekness of the spleen and the stomach(脾胃虛弱), indigestion for milk and food(乳食停滯). The method of treatment is strengthening the spleen and pacification the stomach(健脾和胃). It should help primary care providers in their assessment of common child health problem.

• 열처리공학회지
• /
• 제33권2호
• /
• pp.72-79
• /
• 2020

To improve the mechanical properties of most structural materials for industrial applications, the control of microstructure is essential by heat treatment process or plastic deformation process. Since the mechanical behavior of structural materials is significantly influenced by their microstructure, it is inevitably preceded to understand the relationship between microstructure and strengthening mechanisms of materials which can be easily changed by heat treatment. In this regard, the nanoindentation test is useful technique for analyzing the influence of the localized microstructural change on small-scale mechanical behavior of various structural materials. Here, the interesting studies performed on various heat-treated materials are reviewed with focus on micromechanical properties obtained by nanoindentation, which are reported in the available literature.