• Geomechanics and Engineering
• /
• 재33권6호
• /
• pp.553-565
• /
• 2023

As the structure of broken rock mass is complex, with obvious discontinuity and anisotropy, it is generally necessary to reinforce broken rock mass using grouting in underground construction. The purpose of this study is to experimentally investigate the mechanical properties of broken rock mass after grouting reinforcement with consideration of the characteristics of broken rock mass (i.e., degree of fragmentation and shape) and a range of reinforcement methods such as relative strength ratio between the broken rock mass and cement-based grout stone body (λ), and volumetric block proportion (VBP) representing the volumetric ratio of broken rock mass and the overall cement grout-broken rock mass mixture after the reinforcement. The experimental results show that the strength and deformation of the reinforced broken rock mass is largely determined by relative strength ratio (λ) and VBP. In addition, the enhancement in compressive strength by grouting is more obvious for broken rock mass with spherical shape under a relatively high strength ratio (e.g., λ=2.0), whereas the shape of rock mass has little influence when the strength ratio is low (e.g., λ=0.1). Importantly, the results indicate that columnar splitting failure and inclined shear failure are two typical failure modes of broken rock mass with grouting reinforcement.

• 한국지반환경공학회 논문집
• /
• 제1권1호
• /
• pp.5-12
• /
• 2000

포항 두호동 지역과 인근에 널리 분포하고 있는 이암은 공기 중에 노출되거나 물과 접하게 되며 강도가 급격히 감소되어 많은 문제점을 야기할 수 있다. 자연상태의 점성토는 $K_o$ 상태로 존재하며 하중재하시 주응력 방향에 따라 다르게 거동하는 이방적 특성을 갖는다. 따라서, 본 연구에서는 현장상태와 동일한 $K_o$ 압밀을 행한 후 각기 다른 방향에서 샘플링한 시료에 대하여 전단재하속도를 달리하며 삼축압축시험을 수행하였다. 그리고 시험에서 얻어진 응력 - 변형거동 결과를 Cam-clay 모델에 의한 예측결과와 비교 검토하였다. 시험결과에 의하면, 샘플링각도가 수직방향에서 수평방향으로 증가함에 따라 $K_o$ 값은 감소하였으며, 이암풍화토에서는 변형을 연화거동을 나타내고 있다. 전반적으로 실험결과와 Cam-clay 모델의 거동양상은 비슷하지만, 측차응력에 대한 실험결과가 예측결과보다 훨씬 크게 나타났다. 그리고, $K_o$ 압밀된 이암풍화토의 응력-변형거동의 예측에 대한 Cam-Clay model의 적응성은 만족스럽지 못한 것으로 나타났다.

• Imaging Science in Dentistry
• /
• 제35권3호
• /
• pp.167-173
• /
• 2005

Purpose : To investigate the relationship between three-dimensional (3D) bone imaging parameters and trabecular strength in the mandible. Materials and Methods : Bone specimens were obtained from the mandibles of five male pigs weighing around 110 kg each. Of those, 43 samples were selected for 3D analysis and measured by micro-computed tomography. The five morphometric parameters were trabecular thickness (Tb.Th), bone specific surface (BS/BV), percent bone volume (BV/TV), structure model index (SMI) and degree of anisotropy (DA). Through destructive mechanical testing, strength parameters were obtained. Results : BV/TV, SMI, BS/BV, and Tb.Th showed significant correlations with strength parameters. DA did not show any correlation with the other parameters. In multiple linear regression analysis, BV/TV alone explained $43\%$ of the variance in Young's modulus. By stepwise inclusion of SMI, the variance in the Young's modulus was better explained up to $52\%$. Conclusions : Predicting trabecular strength in the mandible through architectural analysis would be possible. Further study is needed to establish the tendency and variety of trabecular architecture and strength according to the locations within the mandible.

• 터널과지하공간
• /
• 제26권2호
• /
• pp.100-109
• /
• 2016

이 연구에서는 횡등방성 암석파괴함수의 개발에 활용할 수 있는 3가지 강도정수 공간분포함수를 제안하였다. 제안된 분포함수는 편구(oblate spheroid)분포함수, 지수분포함수, 강도정수텐서 방향투영함수이며 모두 2개의 모델파라미터로 정의된다. 제안된 분포함수들을 점착력과 마찰각의 공간분포함수로 활용하여 횡등방성 Mohr-Coulomb 파괴함수를 유도한 후 이를 활용하여 수치삼축시험을 모사하였다. 연약면의 경사각과 구속압의 변화에 따른 파괴축응력 변화 및 파괴면 방향 변화를 계산한 결과 3개의 분포함수을 적용한 경우 모두 실제 실험에서 관찰되는 이방성 파괴특성을 재현하고 있음을 확인하였다. 3개의 분포함수 중 강도정수텐서 방향투영함수를 채용한 경우가 가장 큰 파괴축강도를 계산하였으며 지수분포함수, 편구분포함수 순으로 낮은 파괴축강도 값을 예측하였다.

• 지질공학
• /
• 제26권4호
• /
• pp.593-600
• /
• 2016

본 연구에서는 국내의 107개 터널 설계 과정에서 수행한 현장 및 실내시험 자료 4,280개를 이용하여 암반 및 무결암의 역학적 특성을 암종 및 강도별로 분석하였다. 분석된 물리 및 역학적 특성은 단위중량, 점착력, 내부마찰각, 변형계수, 탄성계수, 포아송비, 일축압축강도, 인장강도, 투수계수, 비중이다. 평균값의 분석 결과에 의하면 편마암은 비중, 화강암은 투수계수, 퇴적암은 단위중량과 점착력, 내부마찰각, 화산암은 변형계수와 탄성계수, 일축압축강도, 인장강도, 변성암은 포아송비에서 가장 높은 값을 보인다. 역학적 특성의 분포 범위는 암종 및 강도를 고려한 분석에도 불구하고 넓게 분포하며, 이는 암반의 불균질성과 이방성에 기인하는 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제3권1호
• /
• pp.61-81
• /
• 2011

In this paper, a complement to the Hoek-Brown criterion is proposed in order to derive the strength of anisotropic rock from strength of the corresponding truly intact rock. The complement is a decay function, which unlike other modifications or suggestions made in the past, is multiplied to the function of the original Hoek-Brown failure criterion for intact rock. This results in a combined and extended form of the criterion which describes the strength of anisotropic rock as a varying fraction of the corresponding truly intact rock strength. Statistical procedures and in particular regression analyses were conducted into data obtained in experiments conducted in the current research program and those collected from the literature in order to define the Hoek-Brown's criterion complement. The complement function was best described by a simple polynomial including only three constants to be empirically evaluated. Further investigations also showed that these constants can be related to the other readily available parameters of rock material which further facilitate determining the constants. A great and prime advantage of the proposed complement is that it is mathematically simple including the least possible number of empirical constants which are easily estimated with minimum experimental effort. Moreover, proposed concept does not suggests any change to the original Hoek-Brown criterion itself or its constants and serves whenever anisotropy does exist in the rock. This further implies on the possibility of using any other failure criterion for intact rock in conjunction with the compliment to reach the strength of anisotropic rock.

• Journal of the Korean Wood Science and Technology
• /
• 제37권6호
• /
• pp.546-555
• /
• 2009

이 연구에서는 목재의 효율적인 이용의 일환으로 스프루스 직교형적층재의 중층을 중밀도섬유판(medium density fiberboard, MDF), 파티클보드(particle board, PB) 및 배향성스트랜드보드(oriented strand board, OSB)의 3종류의 시판용 목질보드를 복합적층한 3층 목질계 복합적층재(패널)를 제작하여, 중층목질재료라미나의 구성엘리멘트가 복합적층재(패널)의 휨 강도성능에 미치는 영향을 조사하였다. 목질계 복합적층재의 휨 탄성계수는 중층에 배향성스트랜드보드(OSB)를 배열한 복합적층재에서 가장 높은 값을 나타내었고, 중밀도섬유판(MDF)을 중층에 배열한 복합적층재에서 가장 낮은 값을 나타내었다. 이 값은 중층에 섬유직각방향라미나를 배열한 다양한 종류의 직교형적층재 보다 높은 값을 나타내는 것이 확인되었다. 표층이 스프루스 섬유직각방향으로 된 복합적층재의 휨 탄성계수 예측치는 실측치와 비슷한 값을 나타내었으나, 표층이 스프루스 섬유방향으로 된 복합적층재의 휨 탄성계수 예측치는 실측치보다 높은 값을 나타내었다. 복합적층재의 휨 강도는 배향성스트랜드보드(OSB)를 중층에 배열한 타입에서 가장 높은 값을 나타내었고, 파티클보드(PB)를 중층에 배열한 타입에서 가장 낮은 값을 나타내어 휨 탄성계수와 약간 차이를 나타내었다. 복합적층에 의해, 복합적층재의 휨강도 성능의 이방성은 스프루스소재의 그것에 비해 현저히 감소하였고, 보드상호간의 강도성능의 차이도 현저히 감소하는 것이 확인되었다.

• Smart Structures and Systems
• /
• 제22권5호
• /
• pp.611-620
• /
• 2018

In this research the effect of bedding layer angle and bedding layer thickness on the shear failure mechanism of concrete has been investigated using PFC3D. For this purpose, firstly calibration of PFC3d was performed using Brazilian tensile strength. Secondly shear test was performed on the bedding layer. Thickness of layers were 5 mm, 10 mm and 20 mm. in each thickness layer, layer angles changes from $0^{\circ}$ to $90^{\circ}$ with increment of $25^{\circ}$. Totally 15 model were simulated and tested by loading rate of 0.016 mm/s. The results shows that when layer angle is less than $50^{\circ}$, tensile cracks initiates between the layers and propagate till coalesce with model boundary. Its trace is too high. With increasing the layer angle, less layer mobilize in failure process. Also the failure trace is very short. It's to be note that number of cracks decrease with increasing the layer thickness. The minimum shear test strength was occurred when layer angle is more than $50^{\circ}$. The maximum value occurred in $0^{\circ}$. Also, the shear test tensile strength was increased by increasing the layer thickness.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.54-60
• /
• 2001

This study is to investigate the mechanical properties and the fatigue crack propagation of fire resistance steel for frame structure as the chemical composition was changed by addition of N, B and rolled end temperature was varied. We used two kinds of specimen, the one is parallel and the other is perpendicular to the rolling directions. As rolled end temperature increased, volume fraction of ferrite and pearlite decreased, but volume fraction of baintie and grain size increased. Micro-hardness decreased as rolled end temperature increased, but tensile and yield strength increased. Volume fraction of ferrite and pearlite decreased by addition of N. But volume fraction of bainite, tensile and yield strength increased. Microstructure was changed to martensite by addition of B, and tensile and yield strength increased. Fatigue life of TL direction specimen was shorter than that of LT direction specimen. There was no significant effect to fatigue crack propagation rate by addition of N and changing rolling condition, but fatigue life was increased by addition of B.

• 한국세라믹학회지
• /
• 제30권5호
• /
• pp.381-388
• /
• 1993

Due to the anisotropy of thermal expansion, LAS system which has low thermal expansion property is hard to obtain a dense sintered body. Therefore, the thermal expansion coefficient and the mechanical strength were decreased. In this study, mullite, which has good mechanical properties in high temperature and comparatively low thmeral expansion coefficient, was taken as a additive in LAS system. And then, sintering, thermal, and mechanical properties were investigated. The results are follows; When mullite is added in eucryptite composition (Li2O.Al2O3.2SiO2) of LAS system, the creation of liquid phase results in the densification of sintered body and the specimen sintered at 136$0^{\circ}C$ for 2 hours shows optimum sintering condition. With the addition of mullite in eucryptite composition, mechanical strength is increased by the control of grain growth. Especially, flexual strength of EM0 specimen was about double value than the basic composition. Thermal expansion coefficients of EM0 and EM15 specimens sintered at 136$0^{\circ}C$ were -8.23$\times$10-6/$^{\circ}C$ and -4.90$\times$10-6/$^{\circ}C$ in the temperature range of RT.~80$0^{\circ}C$. As the mullite content are increased, negative thermal expansion ratios are decreased.