• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.57-61
• /
• 2006

Waste foundry sand of industrial waste which is happening by vast quantity according to fast development of industry has much the occurrence amount and processing method is depended on reclamation, and is using by fine aggregate for construction by recycling method among others. In this research Waste foundry sand powder into cement replace fare use possibility availability judge wish to Slump and air content decreased the replacement ratio increases by concrete special quality that do not harden according to experiment result, and unit capacity mass and bleeding increased the replacement ratio increases. Hardening concrete intensity special quality displayed strength improvement to replacement ratio 20%, and tendency that watertightness increases most in replacement ratio loft in watertight property appear. Considering the strength and watertight properties, the adequate usage of waste foundry sand powder is the 10% of replacement ratio.

• Corrosion Science and Technology
• /
• 제7권5호
• /
• pp.288-295
• /
• 2008

The increase use of natural gas as an energy source has been continuous demand for ever-increasing strength in gas transmission pipeline materials in order to achieve safe and economic transportation of natural gas. In particular, linepipe material for sour gas service primarily needs to have crack resistant property. However, applications of sour linepipes are expanding toward deep water or cold region, which require higher toughness and/or heavier wall thickness as well as higher strength. To improve the crack resistance of linepipe steel in sour environment, low alloy steel are produced by controlled rolling subsequently followed by the accelerated cooling process. This paper summarizes the design concepts for controlling crack resistant property low alloy linepipe steels for sour gas service.

• 한국분말재료학회지
• /
• 제8권4호
• /
• pp.239-244
• /
• 2001

To investigate the effect of process parameters on selective laser sintering of Cu/polyamide mixed powder, Cu/polyamide mixed powder was sintered by selective laser with changing laser power and scanning speed. The properties of sintered body were evaluated by measuring the density and tensile strength, and analysis of XRD, FT-Raman and microstructure. With an increase in the laser power, the density and ultimate tensile strength of sintered Cu/polyamide body increase and then decrease. The maximum values of the density and ultimate tensile strength were decreased with increasing laser scanning speed. These changes were concerned with the difference of irradiation energy of laser into the powder layer. It was considered that the change of the mechanical property of the sintered body with irradiation energy of laser is due to the changes of amount of copper particle and property of polyamide.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.132-140
• /
• 2012

This study aims to assess fatigue property by the static overload and average load in the fillet welded joints which is on the ship structural steel having gusset welds. To this end, a small specimen was made, to which the same welding condition for the actual ship structure was applied, to perform fatigue tests. In this study, a method to simply assess changes in welding residual stress according to different static overload was suggested. By measuring actual strain at the weld toe, the weld stress concentration factor and property which is determined by recrystallization in the process of welding were estimated to investigate the relation between overload and fatigue strength.

• Nuclear Engineering and Technology
• /
• 제34권1호
• /
• pp.90-103
• /
• 2002

The thermal and mechanical properties of compacted bentonite and bentonite-sand mixture were collected from the literatures and compiled. The thermal conductivity of bentonite is found to increase almost linearly with increasing dry density and water content of the bentonite. The specific heat can also be expressed as a function of water ontent, and the coefficient of thermal expansion is almost independent on the dry density. The logarithm of unconfined compressive strength and Young’s modulus of elasticity increase linearly with increasing dry density, and in the case of constant dry density, it can be fitted to a second order polynomial of water content. Also the unconfined compressive strength and Young’s modulus of elasticity of the bentonite-sand mixture decreases with increasing sand content. The Poisson’s ratio remains constant at the dry density higher than 1.6 Mg/m$_3$, and the shear strength increases with increasing dry density.

• 한국지반공학회논문집
• /
• 제22권8호
• /
• pp.99-106
• /
• 2006

본 연구는 액상화에 대한 고로 수쇄슬래그의 잠재수경성의 영향을 명확히 조사하기 위해 고로 수쇄슬래그를 고온알칼리 수(수산화칼슘 첨가, pH=12, 수온 약 $80^{\circ}C$)로 양생한 후에 반복 및 정적 삼축압축시험을 실시하였다. 삼축시험을 통해 얻어진 결과는 일본의 표준사인 Toyoura sand와 천연사인 Genkai sand의 결과와 비교하였다. 시험결과 고로수쇄슬래그의 액상화 강도는 양생기간의 증가와 더불어 잠재수경성에 의한 경화에 의해 증가함을 알았다. 또한, 담수조건에서 189일간 양생한 상대밀도 50%및 80%의 고로 수쇄슬래그에서 잠재수경성의 발현에 의해 점착력이 나타난다. 더욱이 경화과정에 있어서 고로 수쇄슬래그의 액상화 강도는 반복전단횟수 n=20회에서의 반복응력비 $R_{20}$과 점착력 $C_{d}$사이에 선형 관계가 관찰되었다. 또한, 고온 알칼리 수로 양생된 고로 수쇄슬래그에 대한 액상화 강도는 점착력이나 일축압축강도에 의해 예측이 가능함을 알았다.

• 보존과학회지
• /
• 제32권2호
• /
• pp.223-234
• /
• 2016

2액형 에폭시 수지는 문화재 보존처리에 매우 광범위하게 사용되고 있으나 사용 시 주제와 경화제의 배합비율에 따라 경화특성, 기계적 강도, 화학 구조 등이 달라질 수 있고 대상 문화재의 안정성에 영향을 미칠 수 있다. 설문조사 결과, 보존처리 실무자들은 소량의 에폭시수지를 눈대중으로 혼합하거나 가사시간을 줄이기 위해 인위적으로 경화제를 과량 첨가하는 경우가 있는 것으로 조사되었다. 이 연구에서는 속경화형 2종과 일반경화형 2종의 에폭시수지를 대상으로 주제에 대한 경화제의 비율을 0.25~4배로 설정하여 각 경우의 경화특성, 기계적 강도, 화학 작용기를 분석하였다. 그 결과 속경화형 에폭시수지는 경화제가 0.5~2배일 때 높은 반응열과 함께 경화반응이 빠르게 나타났으며, 경화제 비율이 제조사에서 공시된 정비율보다 적을 때 더 높은 기계적 강도가 나타났고 에폭시의 가교결합도 활발히 일어난 것으로 관찰되었다. 일반경화형 에폭시수지는 대부분 경화반응열이 낮고 느린 반응속도로 경화가 진행되며, 경화제가 정비율 이하에서 가장 높은 기계적 강도를 나타냈다. 그러나 경화제 비율이 2배 이상 일 때는 경화속도가 매우 느려지고 접착강도도 낮아지는 것으로 나타났다. 따라서 배합비가 정비율 이하에서는 비교적 빠른 반응속도와 유사한 기계적 강도를 나타내는 반면 정비율 이상에서는 물성이 급격하게 저하되므로 구현하고자 하는 성능에 영향을 미칠 수 있을 것으로 판단된다.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.674-681
• /
• 1994

In this study, four kinds of vapor-permeable waterproofed fabrics were selected and their properties and the changes of properties were investigated after laundering, petroleum drycleaning or tetrachloroethylene drycleaning (each 1, 5, 10 times). The results were as follows: 1) In the water resistance, only Gore Tex satisfied its minimum property requirements, $1.0kg/cm^2$ It decreased after laddering and drycleaning. Hipora-1000, Hipora-2000, Aitac decreased slightly by petroleum drycleaning and Gore Tex decreased slightly by all three methods. 2) In the moisture vapor transmission, three except Hipora-2000 satisfied its minimum property requirement, $4000g/m^2{\cdot}24hr$.24hr. After laundering and drycleaning, it increased regardless of cleaning methods. 3) In the water repellency, Hipora-lOOG, Hipora-2000 were not almost decreased after laundering and drycleaning. Aitac decreased slightly by petrolem drycleaning and Gore Tex decreased slightly by laundering and petroleum drycleaning. 4) Air permeability of Aitac increased with increasing of cleaning times regardless of cleaning methods. 5) In the bond strength, only Gore Tex dissatisfied its minimum property requirements, 250g/cm. Regardless of cleaning method, bond strength decreased with increasing of cleaning times. 6) Color difference was large in case of Hipora-1000 by laundering, Hipora-2000 by laundering and tetrachloroethylene drycleaning Aitac by tetrachloroethylene drycleaning, Gore Tex by laundering. To diminish property change of vaper-permeable waterproofed fabric, petroleum drycleaning is more effective than laundering and tetrachloroethylene drycleaning.

• 설비공학논문집
• /
• 제24권11호
• /
• pp.777-783
• /
• 2012

The hardness and strength test was performed to make the manufacturing process of SA213 P92 boiler pipe steel. And the microstructure change was studied to find out the cause of room temperature property of P92 steel, ie, low hardness and strength property. The room temperature property of P92 steel depends on the improper normalizing and cooling rate. Especially, Ferrite was formed and the steel had low hardness when the temperature was decreased slowly under the cooling rate $1^{\circ}C$/min after normalizing at the temperature around $A_{c1}$ to $A_{c3}$. The critical heat treatment temperature and cooling rate was over $900^{\circ}C$ and over $10^{\circ}C$/min to satisfy the minimum yield and tensile stress which was laid down by ASME Code.

• 한국주조공학회지
• /
• 제31권4호
• /
• pp.198-204
• /
• 2011

The present study was aimed to investigate the dependence of fatigue property on microporosity variation of low-pressure die-cast (LPDC) A356 alloy. The fatigue property of A356 alloy was evaluated through high cycle fatigue test, and the microporosity-terms used were the fractographic porosity measured from SEM observation on fractured surface and the volumetric porosity obtained through the density measurement using Archimedes's principle. The number of cycles to failure of A356 alloys depends obviously upon the variation of fractographic porosity, and can describe in terms of the defect susceptibility which depends on the microporosity variation at a given value of stress amplitude. The modified Basquin's equation was suggested through the combination of microporosity variation and static maximum tensile stress to fatigue strength coefficient. Using modified Basquin's equation, it could suggest that the maximum values of fatigue strength coefficient and exponent achievable in defect-free condition of A356 alloy are 265 MPa, -0.07, respectively.