• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 추계학술대회 논문집
• /
• pp.103-110
• /
• 1998

Several soil improvement methods are applied to stabilize soft ground. But their improvement effects are known to be reduced in view of strength under poor conditions such as marine clay. The purpose of this paper is to investigate the strength increase effects of super injection grouting on the marine clay, A series of laboratory tests and chemical analysis tests has been peformed. Through this study, the causes of strength inferiority of treated soil was analyzed and soil improvement effects of grouted soil was presented.

• 한국지반공학회지:지반
• /
• 제12권2호
• /
• pp.115-132
• /
• 1996

연약지반 안정화공법으로서 각종 고결공법이 성행하고 있으나 해성점토지반이나 통수지반과 같은 특수조건하에서는 시공도 까다롭지만 강도발현이나 내구성 등의 측면에서 보강효과가 저하하는 것을 볼 수 있다. 고결공법은 혼합(고압)처리방식과 주입방식으로 대별할 수 있는 데, 본 연구에서는 첫째로 해성점토지반에 시멘트에 의한 지반보강시의 강도열화문제와 두번째로 지하수흐름이 있는 지반에서의 물유리계 약액주입시의 주입효과증대 및 내구성 문제에 촛점을 맞추어 그 해결방안을 검토 하였다.

• 한국자동차공학회논문집
• /
• 제25권1호
• /
• pp.74-81
• /
• 2017

The door impact beam of the side-impacted vehicle plays a key role in securing occupant safety by preventing intrusion from the impacting vehicle. Despite the low production cost, the press door impact beam has been adopted sparingly because of the strength inferiority. In this study, the design technologies of the press beam aimed at improving bending strength were investigated. First, the effect of the section shape and size was examined. Next, thickness and material strength were increased. Also, the TRB beam application was simulated by varying combined thickness. Some TRB beams with reduced weight exhibited bending strength over the strength of the pipe beam. Then, the beam with a closed center section also showed remarkably enhanced maximum bending strength.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.117-122
• /
• 2005

Prepacked polymer mortar that is mainly composed of MMA monomer and used for the patching and restoring materials of concrete structures was developed, and its hardening and strength properties were experimentally surveyed. Results of study show that the permeance of binder into the aggregate was excellent for the case of PMMA mixing ratio of below 10%, the surface hardening inferiority was not generated for the case of the ratio of over 5%. Working time of the prepacked polymer mortar and hardening shrinkage tended to decrease as the PMMA mixing ratio increased. On the other hand, the ratio turned out not to decisively affect on compressive and flexural strengths. Regardless of PMMA mixing content, the adhesive strength was about 2.5 MPa. Occurring the desquamation on the substrate of cement concrete showed the adhesive strength of MMA prepact polymer mortar was excellent.

• Journal of the Korean Wood Science and Technology
• /
• 제18권2호
• /
• pp.79-85
• /
• 1990

Traditional complex joints have used to a wide variety of wooden furniture construction. Dowel joint is the most popular joint s. However design of this joint to meet specified service condition has been hampered by a lack of proven design formulas which can be use to predict their strength. The object of this study is to investigate the withdrawal strength and effect of dowel diameters in wood and wood based materials. The obtained results were as follows; 1. The relationship between withdrawal strength and dowel diameter is found to be linear. 2. Withdrawal strength of medium density fiberboard and Sepetir in end-to-side joints is superior to Antiaris, particleboard and plywood. 3. In end-to-end joints, withdrawal strength of medium density fiberboard is the most superior joint. but Sepetir. Antiaris and plywood have similarly strength and particleboard is inferiority. 4. Withdrawal strength in end-to-end joints of Antiaris and plywood is higher than in end-ta-side joints. But in end-to-end joints of Sepetir. medium density fiberboard and particleboard is similarity in end-to-side joints.

• 산업기술연구
• /
• 제19권
• /
• pp.75-79
• /
• 1999

Rotary bending fatigue tests were performed to investigate the effects of 2-phase matrix structure on fatigue limit with prepared specimens in high strength ductile irons. Two types of the specimens with different microstructures have been used. Series A has sorbite and series B has bainite. Fatigue limits of both specimens are improved comparing with as cast specimen. The fatigue limit is higher in series B than in series A. The reason why the fatigue limit of series A shows inferiority to that of series B is due to the transition of micro fatigue cracks to mesocrack occurs very rapidly, so increased stress intensity factor drives the fatigue crack growth. The higher fatigue limit of series B which has bainite is caused by the ${\gamma}$ layer contained in microstructure impede the rapid growth of micro fatigue crack to mesocrack and ${\alpha}$ layer around graphite has the higher capacity for the absorption of plastic deformation energy than sorbite.

• 소성∙가공
• /
• 제19권6호
• /
• pp.337-343
• /
• 2010

Current need of weight reduction in automotive part increases the application for high strength steel (HSS). The various types of high strength steels have been used to produce chassis part, control arms and trailing arms for weight reduction and increasing of fatigue durability such as dual phase steel (DP) and ferrite bainite steel (FB). But, DP and FB steels have proven to show inferiority in durability as well as press formability. Edge cracking occurred often in flange forming and hole expansion processes is the major failure encountered. This paper discussed the behavior of edge stretchability of high strength steel of DP and FB steels. Experimental works have been conducted to study the effect of punch clearance and burr direction on hole expansion ratio (HER). Also finite element simulation (FEM) has been preformed to clarify the mechanism of flange crack and support the experimental results on HER of DP and FB steels. It was simulated the whole process of blanking process following by hole expansion process and ductile fracture criterion named the modified Cockcroft-Latham model which was used to capture the fracture initiation. From the hole expansion tests and FEM simulation studies it was concluded that ferrite bainite steel showed better stretch-flangeability than dual phase steel. It was attributed to the lower work hardening rate of ferrite bainite steel than dual phase steel at the sheared edge.

• 대한족부족관절학회지
• /
• 제19권3호
• /
• pp.77-80
• /
• 2015

Acute Achilles tendon rupture is a frequent injury during sports and recreational activities. Treatments for Achilles tendon rupture have been controversial in recent decades. Traditionally the surgical treatment had benefit over nonsurgical treatment in terms of low rerupture rate and early functional restoration. Recently, nonsurgical treatment was found to show no statistically significant inferiority in re-rupture rate, functional outcome, and calf strength. Whereas, surgical treatment had some complications including adhesion, nerve injury, and infection. Nonsurgical treatment has been increasing due to functional rehabilitation with early weight bearing and restricted early motion. It focuses more attention on the course of caring for patients with deep discussion. There are open repair and minimally invasive repair in terms of surgical treatment. There are various techniques for minimally invasive repair of Achilles tendon, which has some advantages over the open repair. However, the optimal technique for minimally invasive repair has not been established. The number of suture strands is important regardless of suture technique.

• 한국의류산업학회지
• /
• 제11권2호
• /
• pp.193-199
• /
• 2009

Now, the proportion of musical was strength in the stage art part to the past considerably as called musical boom. After 1990's, as if it was rise as rise of musical exclusive theater, it was development seriously in Korean musical. But presently, the examined musical product state as the ratio of import musical and creative musical is about 6 to 4 or 7 to 3, it was a inferiority of creative musical in a flood of import musical. So, this study researched for example Kim Kyun Hyoung' writing and Yu Min Suck' production, creative musical 'This is my destiny...' - played by Dept. of multimedia and film, Honam University in september 2007 - this researcher should give much theoretical and substantial assistance to stage costume producer by studying about producing costume of a aria story, a mental state. As I have studied sofar, in designing a stage costume for musical, the overall comprehension of the musical actor's bodies have to be considered. Though performing the manufacture of the really performance work. It is a field that needs various professional knowledge, and only when a musical is produced based on such theories, it will be possible to deliver the theme of the me of the play more effectively, becomes help in the efficiently theatrical costume manufacture realistically and express the various symbolical meanings.

• 공업화학
• /
• 제7권2호
• /
• pp.315-320
• /
• 1996

본 실험에서는 보류향상제의 첨가량과 중질 탄산칼슘 첨가량에 따른 탄산칼슘 보류량(회분함량)을 조사하였으며, 동일 회분량에서 종이의 기계적 광학적 특성을 비교하였다. 각 보류시스템 모두 보류향상제 첨가량을 증가시키면 중질 탄산칼슘(입자평균직경 $3.2{\mu}m$) 보류, 즉 종이의 회분량은 증가한다. 이 경우 보류향상제와 중질 탄산칼슘 첨가량을 조절하여 이미 예정된 회분량이 함유된 종이를 초지할 수 있다. 종이의 인장지수, 파열지수, 인열지수 및 내부결합강도는 종이의 회분량이 증가됨에 따라 직선적으로 감소한다. 특히 동일 회분량에서 비교하면, 콤포질 시스템에 의한 종이에서 제반 강도가 높고, 듀알 폴리머 시스템에서는 강도가 낮다. 불투명도는 회분량 증가에 따라 함께 증가하며, 하이드로콜 시스템에서 가장 높고 역시 듀알 폴리머에서 가장 낮다. 동일 불투명도에서 종이의 강도는 콤포질, 하이드로콜, 듀알 폴리머 시스템 순으로 감소한다. 그러나 보류향상제의 우열을 판단하기 위해서는 충전제의 보류량과 종이의 강도 이외에도 적정 생산조건 및 적정 공정조건과 같은 여러 가지 다른 요인들도 고려되어야 한다.