• 한국지하수토양환경학회지:지하수토양환경
• /
• 제10권3호
• /
• pp.24-31
• /
• 2005

2차원 불균질 대수층에서 다수의 오염원이 있음 경우 오염물의 거동을 모사할 수 있는 방법을 제시하였다. 이 방법은 유선 시뮬레이션을 기반으로 하며 다차원의 계산을 다수의 일차원으로 분해하여 계산하는 방법으로서 불균질한 매질에서 수두 계산을 한 후, 관심영역에 유선을 분포시키고 그 유선을 띠라 오염물이 전파되는 농도를 계산한다. 개발된 모델을 Visual MODFLOW를 이용하여 검증하였고 시간에 따른 농도 분포나 관측정에서의 용질 도달 곡선이 잘 일치함을 확인할 수 있었다. 개발된 모델은 시뮬레이션 수행 시간에 대한 효율 면에서 Visual MODFLOW보다 뛰어나 많은 연산을 필요로 하는 대규모 대수층의 용질거동 예측이나 반복 계산을 필요로 하는 역산 모델링에서 효과적으로 사용될 수 있다.

• 한국환경과학회지
• /
• 제8권3호
• /
• pp.271-280
• /
• 1999

This study was carried out to investigate the characteristics of acidity in the precipitation and weather patterns that were influenced it at Kimhae area from March, 1992 to June, 1994. The range of pH value in the precipitation at Kimhae is 3.45 to 6.80 and the average is pH 4.62, and the major anion components associated with acidity in the precipitation are $Cl^-, SO_4^{-2}, NO_3^-$. These distributions are to be expected the influence of industrialization such as, urbanization and construction of industrial complex at Kimhae area and the long range trasporting of air pollutants from China. The weather patterns governing the acid rain at Kimhae were classified broadly into four types(Cyclone(type I-a, type I-b), Migratory Anticyclone(type II), Tropical Cyclone(type III), Siberia High(type IV) and weather pattern which had the most occurrence frequency of acid rain was type I-a and the average pH value of precipitation in this pattern was 4.45, and we are found that the source area of air mass which was accompanied with high acidic precipitation in Kimhae was the central China include with Peking through the analysis of surface weather maps, 850 hPa wind fields, and the streamline analyses.

• 대한기계학회논문집
• /
• 제19권3호
• /
• pp.834-845
• /
• 1995

An experimental study is made in a nearly two-dimensional 90.deg. curved duct to investigate the effects of interaction between streamline curvature and mean strain on turbulence. The initial shear at the entrance to the curved duct is varied by an upstream shear generator to produce five different shear conditions ; a uniform flow (UF), a positive weak shear (PW), a positive strong shear(PS), a negative weak shear (NW) and a negative strong shear(NS). With the mean field data of the case UF, variations of the momentum thickness, the shape factor and the skin friction over the convex(inner) surface and the concave (outer) surface are scrutinized quantitatively in-depth. It is found that, while the pressure loss due to curvature is insensitive to the inlet shear rates, the distributions of wall static pressure along both convex and concave surfaces are much influenced by the inlet shear rates.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.69-73
• /
• 2000

We systematically analyze the influence of fracture junction, solute transfer characteristics on transport patterns in discrete, two-dimensional fracture network models. Regular lattices and random fracture networks with power-law length distributions are considered in conjunction with particle tracking methods. Solute transfer probabilities at fracture junctions are determined from analytical considerations and from simple complete mixing and streamline routing models. For regular fracture networks, mixing conditions at fracture junctions are always dominated by either complete mixing or streamline routing end member cases. Moreover bulk transport properties such as the spreading and the dilution of solute are highly sensitive to the mixing rule. However in power-law length networks there is no significant difference in bulk transport properties, as calculated by assuming either of the two extreme mixing rules. This apparent discrepancy between the effects of mixing properties at fracture junctions in regular and random fracture networks is explained by the statistics of the coordination number and of the flow conditions at fracture intersections. We suggest that the influence of mixing rules on bulk solute transport could be important in systematic orthogonal fracture networks but insignificant in random networks.

• 대한기계학회논문집
• /
• 제19권10호
• /
• pp.2617-2629
• /
• 1995

The flow through a centrifugal compressor rotor was calculated using the quasi-3-dimensional and fully 3-dimensional Navier-Stokes solution methods. The calculated results, obtained during the development of the computer codes for both methods are discussed. In the inviscid quasi 3-dimensional analysis, stream function formulation was used for the blade to blade (B-B) plane calculations, and the streamline curvature method was used for the meridional (H-S) plane calculations. In the viscous 3-dimensional flow analysis, a control volume method based on a general rotating curvilinear coordinate system was used to solve the time-averaged Navier-Stokes equations, and a standard k-.epsilon. model was used to obtain eddy viscosity. The quasi-3-dimensional analysis reasonably predicts the pressure distributions and requires much less computation time in the region where viscous effects are not strong; however, it fails to predict velocity field and loss mechanism through the impeller passage. The viscous 3-dimensional flow analysis shows reasonable pressure distributions and typical jet-wake flow field through the impeller passage. Secondary flow and total pressure distributions on cross-sectional planes explain the loss mechanisms through the impeller.

• 수산해양기술연구
• /
• 제38권1호
• /
• pp.43-57
• /
• 2002

본 연구는 고성능 전개판을 개발하기 위하여 전개판 주변의 유동장을 계측할 수 있는 해석 방법을 제시하고자 하였다. 실험 방법으로는 CFD를 이용한 유동장의 수치 해석과 유동장의 정량적, 정성적 계측이 가능한 PIV 실험방법을 사용하였다. 본 실험에서는 전개판 주변의 가시화된 영상을 PIV 기법을 이용한 화상처리로 유동특성을 해석하였으며, 이 결과를 CFD에 의한 해석 결과와 유동 패턴을 비교하였다. 또한, 회류 수조에서의 양력 계수 및 항력계수의 계측 결과를 상호 비교 하였다. 그 결과, 수치 해석된 결과와 PIV의 실험 결과는 정성적으로 매우 잘 일치하였으며, 물리적으로 타당성을 확인할 수 있었다. 그 결과는 다음과 같다. (1) 전개판의 유동장 분석을 위하여 레이저 광원을 이용한 가시화 실험을 실시하고, PIV 기법으로 화상분석을 실시하였으며, 유동입자의 흐름으로도 충분한 정성적인 유체운동의 경향을 파악할 수 있었다 (2) PIV해석결과가 정량적인 결과이므로 이를 다양한 후처리 방법을 통해 속도벡터장, 순간 유동장, 평균 와도로 나타내어 유동장의 변화를 확인할 수 있었다. (3) 최대전개력계수가 나타난 영각 24$^{\circ}$에서 비교한 CFD와 PIV 해석 결과, 유동 패턴은 유사하였고, 두 경우 모두 전개판 후연에서 약간의 경계층 박리가 발생하였으나 양호한 흐름을 보였다. (4) PIV에 의한 속도 벡터도, 순간 유선도, 평균 와도로 후처리한 결과, 영각 24$^{\circ}$에서부터 경계층 박리 현상이 일어나기 시작하여, 영각 28$^{\circ}$이상이 되면 심하게 전연으로 발생지점이 이동하게 되고, 그 폭도 확대됨을 확인할 수 있었다.

• 한국전산유체공학회지
• /
• 제20권4호
• /
• pp.109-115
• /
• 2015

In this study, the Stokes flow in the microchannel is analysed where the semicircular protuberances with constant spacing are attached on the upper and lower walls with staggered arrangement. For the low Reynolds number flow in microchannel, Stokes approximation is used and the periodicity and symmetry of the flow are considered to determine the stream function and pressure distribution in the flow field by using the method of least squared error. As results, the streamline patterns and pressure distributions in the flow field are shown for some specific values of the size and spacing of the protuberances, and shear stress distributions on the surface of semicircular protuberances are plotted. Especially, for an important physical property, the average pressure gradient along the microchannel is obtained and compared with that for the case of in-phase arrangement of the upper and lower protuberances. And, for the small clearance between the protuberances of upper and lower walls or between the protuberances and the opposite wall, the average pressure gradient is derived from the lubrication theory and compared with that of the present study.

• Tribology and Lubricants
• /
• 제17권5호
• /
• pp.391-398
• /
• 2001

Two dimensional slow viscous flow around two counter-rotating equal cylinders is investigated based on Stokes'approximation. An exact formal expression of the stream function is obtained by using the bipolar cylinder coordinates and Fourier series expansion. From the stream function obtained, the streamline patterns around the cylinders are shown and the pressure distribution in the flow field is determined. By integrating the stress distributions on the cylinder, the force and the moment exerted on the cylinder are calculated. The flow rate through the gap between the two cylinders is also determined as the distance between two cylinders varies. Special attention is directed to the case of very small distance between two cylinders concerned with the lubrication theory and the minimum pressure is calculated to explain a possible cavitation.

• 오토저널
• /
• 제14권6호
• /
• pp.99-104
• /
• 1992

The complex geometry of the engine room of a passenger car has been modelled two-dimensionally and the thermal and fluid flow therein have been analyzed by using a commercially available code, PATRAN/FLORAM$\mid$N. FLOTRAN adopts a finite element method with streamline upwind formulation for convective terms and the k-.epsilon. turbulence model to solve the three dimensional turbulent flow and heat transfer problems. Velocity vectors, pressure and temperature distributions have been obtained for various cases with different arrangements of license plate, underbody-covers and air dams. The results show that the numerical analysis using PATRAN/FLOTRAN can predict qualitatively well the practical phenomena.

• 한국유체기계학회 논문집
• /
• 제6권1호
• /
• pp.30-36
• /
• 2003

This paper presents the analysis of flows through three different types of radial compressor impeller by using quasi-three-dimensional analysis method. The method obtains two-dimensional solution for velocity distribution on meridional plane, and then calculates approximately the static pressure distributions on blade surfaces. Finite difference method is used for the solutions of governing equations. The compressors have low level compression-ratio and 12 straight radial blades with no backsweep. The results are compared with experimental data and the results of three-dimensional inviscid analysis with those by finite element method. It is found that the agreements with experimental data are good for the cases where viscous effects are not dominant.