• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.231-234
• /
• 2009

The effects of annealing temperature and time on mechanical properties and microstructures were already investigated in cold drawn pearlitic steel wires. During annealing, the increment of the tensile strength at low temperatures found to be due to age hardening, while the decrease in the tensile strength at high temperatures was attributed to age softening, involving the spheroidization of lamellar cementite and recovery of lamellar ferrite. Since Between increase of tensile strength and the occurrence of the delamination would be closely related to the dissolution of cementite, the increase of drawing strain by lower annealing temperature caused the between higher tensile strength and the easier occurrence of the delamination in cold drawn pearlitic steel wires.

• Journal of Microbiology and Biotechnology
• /
• v.18 no.11
• /
• pp.1836-1840
• /
• 2008

Bacteriocins are antimicrobial peptides that are produced by bacteria and toxic to bacterial strains closely related to the producer strain. It has previously been reported that Bacillus thuringiensis strain NEB17 and Bacillus thuringiensis subsp. kurstaki BUPM4 produce the bacteriocins thuricin 17 (3,162 Da) and bacthuricin F4 (3,160.05 Da), respectively. Here, we demonstrate that these bacteriocins have functional similarities and show a similar spectrum of antimicrobial activities against indicator strains. We also studied the effects of sterilization methods on the recovery and biological activities of these bacteriocins. They were completely degraded by autoclaving and the two were similarly affected by the tested filter membranes. Polyvinylidene fluoride (PVDF), polyestersulfone (PES), and cellulose acetate (CA) are suitable for filter sterilization of these bacteriocins. The two bacteriocins were stable across a range of storage conditions. These data will facilitate their utilization in food preservation or agricultural applications.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.427-430
• /
• 2008

The influence of subsequent annealing treatment on the dynamic deformation and the fracture behavior of submicrocrystalline Al-4.4%Mg alloy is investigated in this study. After inducing an effective strain of 8 via equal-channel angular pressing at $200^{\circ}C$, most of the grains are considerably reduced to nearly equiaxed grains of $0.3{\mu}m$ in size. With an increment of various subsequent heat treatments for 1 hour, resultant microstructures are found to be fairly stable at temperatures up to $200^{\circ}C$, suggesting that static recovery will be dominantly operative, whereas grain growth is pronounced above $250^{\circ}C$. The results of tensile tests show that yield and ultimate tensile strength decrease, but elongation-to-failure and strain hardening rate increase with an increase in annealing temperatures. The dynamic deformation and the fracture behavior retrieved with a series of torsional tests are explored with respect to annealed microstructures. Such mechanical response is analyzed in relation to resultant microstructure and fracture mode.

• Korean Journal of Veterinary Research
• /
• v.40 no.3
• /
• pp.533-541
• /
• 2000

Biochemical and genetic analysis were carried out to investigate the potential recovery of pathogenecity or related mutations of Brucella abortus RB51 vaccine strains. RB51 strains were recovered from commercial vaccines, including related seed stocks from private companies in Republic of Korea, strain from USA, a reference strain from C university and a field isolate (Daehungjin) from aborted dairy cow after RB51 vaccination were compared with two identified virulent wild strains (S2308 and a field strain isolated from dairy cow in Korea) at the same conditions. All the strains examined, except identified pathogenic strains, revealed the identical characteristics to the original RB51 in biochemical properties, antigen and bacteriophage typing. Outer membrane protein (OMP) profiles from strains of RB51 showed the same patterns with standard RB51 in SDS-PAGE. In addition, Western blotting with the brucella specific monoclonal antibody also indicated that all the vaccine strains were completely deficient in their LPS compared to the pathogenic Br abortus strains. The differences in DNA structures among strains were also possible to detect after PCR. All vaccine strains, except S19, S1119-3, S1075, S544 and Br suis, were amplified a 178bp DNA fragment of eri-gene, and 364bp of IS711 elements. In contrast, 498bp DNA product was only found with Br abortus. Overall evidences in the present study confirmed that the RB51 strains for vaccine production in Korea did not originated from the phenomena of possible recovery of pathogenicity or related to any potential mutation event at all.

• Korean Journal of Food Science and Technology
• /
• v.25 no.1
• /
• pp.28-32
• /
• 1993

In order to elucidate the temperature and pressure effect on the oil expression of perilla seed, recovery of expressed oil (REO) and volumetric strain of both roasted and unroasted perilla seeds were observed at different temperature, pressure and for different periods of press. In this experiment, moisture content of perilla seed was adjusted to 2.5% and temperature used were 30, 40, 50 and $60^{\circ}C$. Pressure applied were 10, 30, 50 and 70 MPa, and periods of press were 5, 7, 9 and 11 min. As temperature and pressure were increased or periods of press was lengthened, REO and volumetric strain of pressed cake were increased. Maximum REO of unroasted perilla seeds were found to be 85.59% and those of roasted perilla seeds be 85.30%, at 70 MPa, $60^{\circ}C$, and for 11 min. Viscosity of expressed oil were exponentially dependent on temperature and REO were increased as viscosity was decreased. From statistical analysis between effects of expression factors and REO and volumetric strain of pressed cake, importance of their effects was decreased in the order of pressure, temperature, $temperature{\times}pressure$ and periods of press. The multiple regression equation between REO(Y) and temperature (T), pressure (P), and periods of press (D) were as follows; $Y=7.95+36.85P+1.12T^2-0.55TP-5.08P^2\;r^2=0.97$ for unroasted perilla seed (p<0.01), $Y=4.50T+39.23P+0.83T^2-1.71P-5.07P^2\;r^2=0.99$ for roasted perilla seed (p<0.01).

• Fibers and Polymers
• /
• v.2 no.3
• /
• pp.122-128
• /
• 2001

UV-curable polyurethane acrylate prepolymers were prepared from diisocyanates [isophorone diisocyanate (IPDI), 2,4-toluene diisocyanate (TDI), or 4,4'-dicyclohexylmethane diisocyanate (H$_{12}$MDI)], diols [ethylene glycol (EG), 1,4-butane diol (BD), or 1,6-hexane diol (HD)], polypropylene glycol as a polyol. UY-curable mixtures were formulated from the prepolymer (90 wt%), reactive diluent monomer trimethylol propane triacrylate (10 wt%). and photoinitiator 1-hydroxycy-clohexyl ketone (3 wt% based on prepolymer/diluent). The effects of different diisocyanates/low molecular weigh dial on the dynamic mechanical thermal properties and elastic recovery of UV-cured polyurethane acrylate films were examined. The tensile storage modulus increased a little in the order of EG > BD > HD at the same diisocyanate. Two loss modulus peaks for all samples are observed owing to the glads transition of softs segments ($T_gh$) and the glass transition temperature of hard segments ($T_gh$). For the same diisocyanate, $T_gh$, decreased, however, $T_gh$ increased, in the order of HD > BD > EG. The elastic recovery also increased in the order of HD > BD > EG at the same diisocyanate. In case of same diols, $T_gh$ increased in the order of $H_12$MDl > TDI > IPDI significantly. The ultimate elongation and elastic recovery increased in the order of TDI > IPDI > $H_12$MDl at the same diol.l.

• Korean Journal of Soil Science and Fertilizer
• /
• v.29 no.2
• /
• pp.190-198
• /
• 1996

The Neomycin resistant gene in transposon 5 (Tn5) was introduced into a mutant of Bradyrhizobium japonicum RJB 6 $str^rnal^r$ by conjugation. This marked strain was used in coinoculation of soybean with Pseudomonas fluorescens(Ps-3) and Bacillus subtilis(BCAC-4) and in antibiotic treatment of soybean for studying rate of nodule formation and growth promoting effect on soybean plant. When the marked strain RJB 6 $str^rnal^rneo^r$ with Ps-3, BCAC-4, and Ps-3 plus BCAC-4 was coinoculated into two soils, the recovery rate of the marked strain was 8.5, 4.3 and 2.9 percent in soybean cultivated soil, and 10.3. 6.0 and 5.0 percent in soybean uncultivated soil. The best growth promoting effect of coinoculation on soybean plant was found with the marked strain plus Ps-3. When the marked strain was inoculated into soybean with antibiotic treatment, the rate of nodule formation in soybean cultivated soil was between 12.5 and 25.4 percent, while that in soybean uncultivated soil was between 23.7 and 43.2 percent. The highest rate of nodule formation with the marked strain was found in streptomycin 1000 ppm treatment plot.

• Biomedical Science Letters
• /
• v.9 no.3
• /
• pp.145-150
• /
• 2003

In the intestinal mucosa, mast cells are thought to be responsible for the expulsion of parasites. We investigated the relationship of worm expulsion and mast cells in C3H/HeN and BALB/c mice infected with Echinostoma hortense. In addition, we examined whether the worm recovery rate was associated with the strain of mice, and whether a toluidine stain and immunohistochemistry using the c-kit antibody was effective in the detection of mast cells. In order to investigate the mucosal immune response of C3H/HeN and BALB/c mice, each mouse was infected orally with 30 E. hortense metacercariae. Then, the number of mucosal mast cells and worm recovery rates was observed in experimentally infected mouse strains between 1 week and 8 weeks post infection (PI). Mucosal mast cells were increased in 3 weeks P.I. in C3H/HeN and BALB/c mice. On the other hand, only mucosal goblet cells and worm recovery rates correlated in C3H/HeN mice (P=0.0482). Worm recoveries in C3H/HeN mice were 65.7$\pm$5.6, 53.3$\pm$5.4 and 6.7$\pm$0.6 in week 1, 2, and 3 P.I. and strongly decreased in week 3 P.I. Worm recoveries in BALB/c mice were 23.0$\pm$2.5, 10.0$\pm$1.0, and 6.7$\pm$0.6% in week 1, 2, and 3 P.I. and gradually decreased from week 1 P.I. to week 3 P.I. Worm recoveries in C3H/HeN mice were significantly higher than in BALB/c mice (P<0.00l). The number of mast cells in C3H/HeN and BALB/c mice using the anti-c-kit antibody reached to a peak in week 3 P.I. and recovered as normal level in week 5 P.I. and 6 P.I. The number in E. hortense-infected C3H/HeN mice (P=0.0015) was higher than in E. hortense-infected BALB/c mice (P=0.01) compared with the control group. There were significant differences in the number of mast cells among regions of the intestine in in C3H/HeN mice (P<0.05) but not in BALB/c mice (P>0.05). Immunohistochemistry using the anti-c-kit antibody was significant method as an examination of the number of mast cells (P=0.0002). In conclusion, the present study demonstrated that mast cells play an important role in worm recovery, and immunohistochemistry using the anti-c-kit antibody was superior to toluidine stain as an examination of mast cells.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.1
• /
• pp.279-288
• /
• 1999

The creep of concrete structures caused by variable stresses is generally calculated by step-by-step method based on the superposition of creep function. Although most practical application is carried out by this linear assumption. significant deviations between predictions and experiments have been observed when unloading takes place, that is. stress is reduced. This shows that the superposition of creep function does not describe accurately the effect of sustained compressive preload. The main purpose of this study is to propose a creep analysis model which is expressed with both creep function and creep recovery function where increase or decrease of stress is repeated. In these two function method, the creep behavior is modelled by using linear creep law for loading and creep recovery law for unloading. To apply two function method to time analysis of concrete structures, the calculation method of creep strain increment under varying stress is proposed. The calculation results based on the present method correlates very well with test data, but the conventional superposition method exhibits large deviation from test results. This paper provides a more accurate method for the time dependent analysis of concrete structures subjected to varying stress, i.e. increasing or decreasing stress. The present method may be efficiently employed in the revision of future concrete codes.

• BMB Reports
• /
• v.32 no.4
• /
• pp.363-369
• /
• 1999

The orf8(chlD) gene cloned from Streptomyces antibioticus T$\"{u}$99 was overexpressed using an E. coli system to confirm its biological function. Induction of the E. coli strain transformed with recombinant plasmid pRFJ 1031 containing orf8 resulted in the production of a 43,000 dalton protein. Glucose-1-phosphate thymidylyltransferase activity of the cell extract obtained from the transformed strain was 4-5 times higher than that of the control strain. The expressed protein was purified 18-fold from E. coli cell lysate using three chromatographic steps with a 17% overall recovery to near homogeneity. The N-terminal amino acid sequence of the purified protein agrees with the nucleotide sequence predicted from the orf8 gene. The SDS-PAGE estimated subunit mass of 43,000 dalton agrees well with that calculated from the amino acid composition deduced from the nucleotide sequence of the orf8 gene (43,000 Da). Also, the native enzyme has a monomeric structure with a molecular mass of 43,000 dalton. The purified protein showed glucose-1-phosphate thymidylyltransferase activity catalyzing a reversible bimolecular group transfer reaction, and was highly specific for dTTP and ${\alpha}$-D-glucose 1-phosphate as substrates in the forward reaction, and for dTDP-D-glucose and pyrophosphate in the reverse reaction.