• Steel and Composite Structures
• /
• v.47 no.3
• /
• pp.383-393
• /
• 2023

Conventional reinforced concrete design codes assume ideal strain evolution in semi-deep beams with externally bonded fiber-reinforced polymer (EB-FRP) web strips. However, there is a strain interaction between internal stirrups and web strips, leading to a notable difference between code-based and experimental shear strengths. Current study provides an experiment-verified detailed numerical framework to assess the potential strain interaction under quasi-static monotonic load. Based on the observations, steel stirrups are effective only for low EB-FRP amounts and the over-strengthening of semi-deep beams prevents the stirrups from yielding, reducing its shear strength contribution. A notable difference is detected between the code-based and the study-based EB-FRP strain values, which is a function of the normalized FRP stress parameter. Semi-analytical relations are proposed to estimate the effective strain and stress of the components considering the potential strain interaction. For the sake of simplification, a linearized correction factor is proposed for the EB-FRP web strip strain, assuming its restraining effect as constant for all steel stirrup amounts.

• Korean Journal of Agricultural Science
• /
• v.39 no.1
• /
• pp.53-60
• /
• 2012

This work was conducted to evaluate the laying performance of Korean Native Ducks (KND) Pure-Line (PL). A total of 400 female pullets were hatched from PL to keep in National Institute of Animal Science, Korea. Twenty weeks old PL female ducks were divided into 4 groups (5 replications/group, 20 head/replications). Four groups were compared in a $2{\times}2$ factorial arrangement with strain (White strains, WW; Celadon strains, CC) and house type (flat house, cage house). On first egg laying day, CC strain laid eggs earlier compared to WW strain (P<0.01), but there was no significant difference between flat and cage house. Egg weight (EW) and body weight (BW) at first egg laying day have no difference among strains and houses. BW of CC strain was higher than WW strain at the age of 30 week (P<0.01). Weekly feed intake (FI) have no difference between flat and cage house, but FI of WW strain was high compared to CC strain during 20~30 weeks. There was no significant difference on EW between CC and WW strains, but EW was low at flat house compared to cage house (P<0.05). Weekly egg productions of WW strain and flat house were lower than CC strain and cage house, respectively (P<0.01). Finally, These results can provide the information that needed to introducing new strains.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3E
• /
• pp.84-94
• /
• 2008

Displacement estimation is a crucial step in ultrasonic strain imaging. The displacement between a pre- and postcompression signal in the current data window is estimated by first shifting the postcompression signal by the displacement obtained in the previous data window to reduce their decorrelation and then determining the remaining part of the displacement through autocorrelation and conversion of phase difference into time delay. However, since strain image quality tends to vary with the amount of compression applied, we propose two new methods for enhancing strain image quality, i.e., displacement normalization and adaptive persistence. Both in vitro and in vivo experiments are carried out to acquire ultrasound data and produce strain images in real time under the application of quasi static compression. The experimental results demonstrate that the methods are quite effective in improving strain image quality and thus can be applied to implementing an ultrasound elasticity imaging system that operates in real time.

• Geomechanics and Engineering
• /
• v.18 no.3
• /
• pp.225-234
• /
• 2019

A numerical stepwise approach for cavity expansion problem in strain-softening rock or soil mass is investigated, which is compatible with Mohr-Coulomb and generalized Hoek-Brown failure criteria. Based on finite difference method, plastic region is divided into a finite number of concentric rings whose thicknesses are determined internally to satisfy the equilibrium and compatibility equations, the material parameters of the rock or soil mass are assumed to be the same in each ring. For the strain-softening behavior, the strength parameters are assumed to be a linear function of deviatoric plastic strain (${\gamma}p^*$) for each ring. Increments of stress and strain for each ring are calculated with the finite difference method. Assumptions of large-strain for soil mass and small-strain for rock mass are adopted, respectively. A new numerical stepwise approach for limited pressure and plastic radius are obtained. Comparisons are conducted to validate the correctness of the proposed approach with Vesic's solution (1972). The results show that the perfectly elasto-plastic model may underestimate the displacement and stresses in cavity expansion than strain-softening coefficient considered. The results of limit expansion pressure based on the generalised H-B failure criterion are less than those obtained based on the M-C failure criterion.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.3
• /
• pp.312-318
• /
• 2013

PURPOSE. The aim of this study was to compare the passivity of implant superstructures by assessing the strain development around the internal tapered connection implants with strain gauges. MATERIALS AND METHODS. A polyurethane resin block in which two implants were embedded served as a measurement model. Two groups of implant restorations utilized cement-retained design and internal surface of the first group was adjusted until premature contact between the restoration and the abutment completely disappeared. In the second group, only nodules detectable to the naked eye were removed. The third group employed screw-retained design and specimens were generated by computer-aided design/computer-aided manufacturing system (n=10). Four strain gauges were fixed on the measurement model mesially and distally to the implants. The strains developed in each strain gauge were recorded during fixation of specimens. To compare the difference among groups, repeated measures 2-factor analysis was performed at a level of significance of ${\alpha}$=.05. RESULTS. The absolute strain values were measured to analyze the magnitude of strain. The mean absolute strain value ranged from 29.53 to 412.94 ${\mu}m/m$ at the different strain gauge locations. According to the result of overall comparison, the cement-retained prosthesis groups exhibited significant difference. No significant difference was detected between milled screw-retained prostheses group and cement-retained prosthesis groups. CONCLUSION. Within the limitations of the study, it was concluded that the cement-retained designs do not always exhibit lower levels of stress than screw-retained designs. The internal adjustment of a cement-retained implant restoration is essential to achieve passive fit.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.420-428
• /
• 2021

In this study, linearized sweeping of a wavelength sweeping laser was realized. This technique was used to measure the strain on a fiber Bragg grating(FBG) sensor. For linear sweeping, PID control over the wavelength difference between linear and nonlinear sweeping was employed. The performance test showed that linear sweeping with a 46 nm range and a 1 kHz frequency held up well with a 99.5 % decrement in nonlinearity after the 120th feedback. When attached to a strain gage, the FBG sensor registered strain that matched the data sheet within a difference of 4.5[με]. Altogether, linear sweeping can play a leading role in monitoring a safety of large SOC structures as well as in other wavelength sweeping laser related fields.

• Microbiology and Biotechnology Letters
• /
• v.23 no.6
• /
• pp.777-780
• /
• 1995

A strain US50-3 producing water-soluble red pigment was isolated from the pond separating oil from water near the oil storage tanks. The strain US50-3 was identified as a strain of Serratia marcescens considering its morphological and physiological characteristics, and DNA G+C contents. It showed a little difference comparing to the Type strain and was considered to be another biotype strain.

• Journal of Korean Academy of Nursing
• /
• v.34 no.2
• /
• pp.235-242
• /
• 2004

Purpose: The main purpose of this study was to identify the correlation between the child rearing attitudes and the maternal role strain of mother with infants. Method: This study is designed as a descriptive research study and the data was collected from 82 mothers and infants by means of an interview and questionnaire in a period from July 2002 to December 2002, when they came to screen their infant's growth and developmental state at a public health center. Result: The results of this study were as follows: There was a significant positive correlation between the child rearing attitudes and maternal role strain(r.=.53, p=.000). There was a significant difference between the father's employment state and child rearing attitude of mothers(t.=5.22, p<.000). There was a significant difference between male infant and female infants in maternal role strain(t.=3.8, p=0.04). Conclusion: When the child rearing attitude was positive, the subject's maternal role strain was high. Also further research is needed on social support or other factors in the subjects in child-rearing attitudes and maternal role strain.

• The Journal of Korean Society of Virology
• /
• v.27 no.1
• /
• pp.59-68
• /
• 1997

Hantaan virus Howang strain which isolated from the blood of severe case of Korean hemorrhagic fever is more virulent than HTN 76/118 and showed different RFLP from partial PCR amplifed M genome segment to established Hantaan serotype viruses. We have determined the nucleotide sequence of the M and S genome segments and compared to HTN 76/118. The M and S segment of Howang strain has 3615 and 1696 nucleotides long, respectively. The M segment sequence of Howang strain is one mucleotide shorter than HTN 76/118. The sequence data of Howang strain shows 93.5% homology to HTN 76/118. One long open reading frame, which strats from 41nt. to 3448nt. of the M segment and from 37nt. to 1326nt. of the S segment, exist to on complementary sense of the virus genome. There are no significant difference between HTN 76/118 and Howang strain on hydrophobicity of deduced polypeptides, but has slight difference on secondary structure.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.5
• /
• pp.1192-1202
• /
• 1994

Fatigue behavior and life prediction were presented for thermal-mechanical and isothermal low cycle fatigue of 12Cr forged steel used for high temperature applications. In-phase and out-of-phase thermal-mechanical fatigue test at 350 to 600.deg. C and isothermal low cycle fatigue test at 600.deg. C were conducted using smooth cylindrical hollow specimen under strain-control with total strain ranges from 0.006 to 0.015. Cyclic softening behavior was observed regardless of thermal-mechanical and isothermal fatigue tests. The phase difference between temperature and strain in thermal-mechanical fatigue resulted in significantly shorter fatigue life for out-of-phase than for in-phase. The difference in fatigue lives was dependent upon the magnitudes of inelastic strain ranges and mean stresses. Increase in inelastic strain range showed a tendency of intergranular cracking and decrease in fatigue life, especially for out-of-phase thermal-mechanical fatigue. Thermal-mechanical fatigue life prediction was made by partitioning the strain ranges of the hysteresis loops and the results of isothermal low cycle fatigue tests which were performed under the combination of slow and fast strain rates. Predicted fatigue lives for out-of-phase using the strain range partitioning method showed an excellent agreement with the actual out-of-phase thermal-mechanical fatigue lives within a factor of 1.5. Conventional strain range partitioning method exhibited a poor accuracy in the prediction of in-phase thermal-mechanical fatigue lives, which was quite improved conservatively by a proposed strain range partitioning method.