• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.625-626
• /
• 2010

• 대한기계학회논문집A
• /
• 제28권6호
• /
• pp.791-798
• /
• 2004

Fatigue crack initiation lives of round cylindrical notch specimen were investigated. Firstly, local strain approximation methods, such as the modified incremental Neuber's rule and the modified incremental Glinka's equivalent strain energy density(ESED) rule, were used to get multiaxial stress and strain state components at the notch tip. Based on the history of local stress and strain, multiaxial fatigue models were used to obtain fatigue crack initiation lives. Because the solution of Neuber's rule and Glinka's ESED rule make the upper and lower bound of local strain approximations, fatigue crack initiation lives are expected to place between life predictions by two local strain approximations. Experimental data were compared with the fatigue crack initiation life prediction results.

• Coupled systems mechanics
• /
• 제12권4호
• /
• pp.297-313
• /
• 2023

This paper deals with delamination analysis of non-linear viscoelastic multilayered beam subjected to bending in the plane of the layers. For this purpose, first, a non-linear viscoelastic model is presented. In order to take into account the non-linear viscoelastic behaviour, a non-linear spring and a non-linear dashpot are assembled in series with a linear spring connected in parallel to a linear dashpot. The behaviours of the non-linear spring and dashpot are described by applying non-linear stress-strain and stress-rate of strain relationships, respectively. The constitutive law of the model is derived. Due to the non-linear spring and dashpot, the constitutive law is non-linear. This law is used for describing the time-dependent mechanical behaviour of the beam under consideration. The material properties involved in the constitutive law vary along the beam length due to the continuous material inhomogeneity of the layers. Solution of the strain energy release rate for the delamination is obtained by analyzing the balance of the energy with considering of the non-linear viscoelastic behaviour. The strain energy release rate is found also by using the complementary strain energy for verification. A parametric study is carried-out by using the solution obtained. The solutions derived and the results obtained help to understand the time-dependent delamination of non-linear viscoelastic beams under loading in the plane of layers.

• 한국가스학회지
• /
• 제17권6호
• /
• pp.52-57
• /
• 2013

본 연구에서는 안전모 쉘 구조물의 정상부에 돌출부를 설치한 경우와 설치하지 않은 경우에 대해, 안전모의 두께와 하중면적을 변수로 변형률 에너지 밀도, 응력, 변위거동을 유한요소법으로 해석하였다. 변형률 에너지 밀도는 안전모로 전달되는 충격에너지 전달을 흡수하는 성능을 나타내는 변수로 안전모의 안전성을 고찰하는 중요한 요소 중의 하나이다. 유한요소 해석 결과에 의하면, 4,540N의 충격력이 안전모의 정상부 표면에 가해질 때 충격하중을 받는 하중면적이 증가할수록 최대응력은 선형적으로 줄어든다. 그러나, 최대 변형률 에너지 밀도는 하중면적이 증가할수록 커지는 것으로 나타났다. 변형률 에너지 밀도가 줄어들면, 안전모 착용자의 머리와 목 부분으로 전달되는 충격력은 줄어드는 것으로 나타났으며, 이것은 안전모의 충격에너지 흡수 안전성을 약화시키는 요인이 될 수 있다. 따라서, 안전모의 안전한 설계를 위해서는 정상부에 돌출 구조물을 설치하는 것이 좋지만, 이러한 수정 안전모는 충격에너지 흡수성능 측면에서는 불리함을 알 수 있다.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.166-175
• /
• 2002

Low cycle fatigue tests are performed on the HSLA steel that be developed for a submarine material. The relation between strain energy density and numbers of cycles to failure is examined in order to predict the low cycle fatigue life of HSLA steel. The cyclic properties are determined by a least square fit techniques. The life predicted by the strain energy method is found to coincide with experimental data and results obtained from the Coffin-Manson method. Also the cyclic behavior of HSLA steel is characterized by cyclic softening with increasing number of cycle at room temperature. Especially, low cycle fatigue characteristics and microstructural changes of HSLA steel are investigated according to changing tempering temperatures. In the case of HSLA steel, the $\varepsilon$-Cu is farmed in $550^{\circ}C$ of tempering temperature and enhances the low cycle fatigue properties.

• Journal of Mechanical Science and Technology
• /
• 제15권1호
• /
• pp.44-51
• /
• 2001

One of the recent issues in design of the spot-welded structure such as the automobile body is to develop an economical prediction method of the fatigue design criterion without additional fatigue test. In this paper, as one of basic investigation for developing such methods, fracture mechanical approach was investigated. First, the Model I, Mode II and Mode III, stress intensity factors were analyzed. Second, strain energy density factor (S) synthetically including them was calculated. And finally, in order to decide the systematic fatigue design criterion by using this strain energy density factor, fatigue data of the ΔP-N(sub)f obtained on the various in-plane bending type spot-welded lap joints were systematically re-arranged in the ΔS-N(sub)f relation. And its utility and reliability were verified by the theory of Weibull probability distribution function. The reliability of the proposed fatigue life prediction value at 10(sup)7 cycles by the strain energy density factor was estimated by 85%. Therefore, it is possible to decide the fatigue design criterion of spot-welded lap joint instead of the ΔP-N(sub)f relation.

• International Journal of Safety
• /
• 제2권1호
• /
• pp.1-6
• /
• 2003

In this paper, several different fracture criteria using the Eftis and Subramanian's stress solutions [1] are compared with the printed experimental results under different loading conditions. The analytical results of using the solution with non-singular term show better than without non-singular in comparison with the experimental data. And maximum tangential stress criterion (MTS) and maximum tangential strain energy density criterion (MTSE) can get useful results for several loading conditions.

• Structural Engineering and Mechanics
• /
• 제43권3호
• /
• pp.395-410
• /
• 2012

The visualizing energy flow and control in vibrating stiffened plates with a cutout are studied using finite element method. The vibration intensity, vibration energy and strain energy distribution of stiffened plates with cutout at different excitation frequencies are calculated respectively and visualized for the various cases. The cases of different size and boundaries conditions of cutouts are also investigated. It is found that the cutout or opening completely changes the paths and distributions of the energy flow in stiffened plate. The magnitude of energy flow is significantly larger at the edges near the cutout boundary. The position of maximum strain energy distribution is not corresponding to the position of maximum vibrational energy. Furthermore, the energy-based control using constrained damping layer (CDL) for vibration suppression is also analyzed. According to the energy distribution maps, the CDL patches are applied to the locations that have higher energy distribution at the targeted mode of vibration. The energy-based CDL treatments have produced significant attenuation of the vibration energy and strain energy. The present energy visualization technique and energy-based CDL treatments can be extended to the vibration control of vehicles structures.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.45-49
• /
• 2013

It is important to have a well developed strain energy function in order to understand the mechanical behavior of biomaterial like the blood vessel of artery. However, since it is not possible to have a complete form of strain energy function of artery, theoretical framework describing the behaviour of Rubber-like material which is similar to blood vessel is applied to infer useful forms of strain energy function of biomaterial. Based on Chuong-Fung model and Mooney-Rivlin model, material parameters are estimated based on experimental data. From the results, it can be inferred that the estimated parameters can be used to explain the difference of mechanical characteristics between normal vessel and vessel with stent.

• 한국강구조학회 논문집
• /
• 제12권6호
• /
• pp.691-700
• /
• 2000

두 변이 단순지지된 역대칭 Angle-Ply 적층판의 자유진동에 대하여 Yang, Norris, Stavsky의 YNS 이론을 이용하여, 적층판의 자유진동해석 및 변형에너지 해석을 하였다. 적층판의 운동방정식은 선점법을 사용하여 해석하였고, 탄성계수비와 적층수가 고유진동수에 미치는 영향을 검토하였다. 또한 변형에너지 분포 해석을 이용하여 적층판의 진동특성을 명확히 규명하였다.