• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.17-30
• /
• 2000

본 연구의 목적은 폐주물사-플라이애쉬 혼합재료의 옹벽 뒷채움재 이용시 옹벽에 작용하는 토압과 안정성에 대한 특성을 평가하는 것이다. 세종류의 폐주물사(생형사, 후란사, 코티드사)와 ASTM 분류 기준 F 등급의 플라이애쉬를 이용한 유동성 뒷채움재의 옹벽 적용성평가를 위해 인위적 변위제어 실험 및 자유변위제어실험을 이용하여 모형옹벽실험을 수행하였다. 인위적 변위제어실험의 경우 유동성 뒤채움의 타설 직후 토압계수의 크기는 0.8~1 사이의 값으로 나타났고, 약 12시간이 경과하면 옹벽에 작용하는 토압이 상당부분 저감되었다. 2단계 타설 방법을 적용한 자유변위실험의 경우, 슬러리 형태의 유동성 뒤채움재의 타설초기에 후란사와 코티드사 혼합재는 빠른 배수효과에 의해 토압 경감 효과가 빨리 나타났지만, 1일 후의 토압은 같은 양생시간의 생형사에 비해 크게 유지되었다. 모형실험의 자유변위제어 실험결과를 이용한 안정성 해석으로부터 6m 옹벽에 타설할 수 있는 뒤채움재의 시공단계별 1차타설 높이 및 2차타설 높이는 생형사의 경우 3.9m 및 3.57m, 후란사의 경우 4.07m 및 3.64m, 코티드사의 경우 3.86m 및 3.54m, 혼합사의 경우 3.9m 및 3.44m로 결정되었고, 실제 옹벽의 뒤채움 높이 5.4m보다 크므로 2단계 시공으로 옹벽의 뒤채움을 완공할 수 있는 것으로 판정되었다. 또한 재료의 양생특성에 따른 옹벽의 안정성은 양생기간이 경과함에 따라 더욱 증가되는 결과를 나타내었다.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.133-141
• /
• 2006

The Low cycle fatigue behavior of 11.7Cr-1.1Mo heat-resisting steel has been investigated under strain-controlled conditions with mean stresses at room temperature and $300^{\circ}C$. For the tensile mean stress test, the initial high tensile mean stress generally relaxed to zero at room temperature, however, at $300^{\circ}C$ initial tensile mean stress relaxed to compressive mean stress. Low cycle fatigue lives under mean stress conditions are usually correlated using modifications to the strain-life approach. Based on the fatigue test results from different stain ratio of -1, 0, 0.5, and 0.75 at room temperature and $300^{\circ}C$, the fatigue damage of the steel was represented by using cyclic strain energy density. Total strain energy density considering mean stress indicated well better than not considering mean stress at $300^{\circ}C$. Predicted fatigue life using Smith-Watson-Topper's parameter correlated fairly well with the experimental life at $300^{\circ}C$.

• 콘크리트학회논문집
• /
• 제22권2호
• /
• pp.263-271
• /
• 2010

이 연구는 국내에서 생산되고 있는 철근이 반복하중을 받는 경우의 파괴 특성에 대한 검증을 목적으로 한다. 이 논문은 철근콘크리트 하부구조(파일과 교각)에 배근된 축방향 철근에 대한 저주파 피로 거동을 다루었다. 전체 81개의 철근 실험체에 대하여 변형률 진폭에 따른 반복 축방향 변형률 제어 방식으로 저주파 피로 실험을 수행하였다. 실험 변수는 인장변형률과 압축변형률의 비율, 축방향 철근의 항복강도, 철근지름에 대한 철근길이의 비율, 철근의 크기와 변형률 진폭으로 선택하였다. 이 논문에서 실험 결과에 따른 저주파 피로 거동과 저주파 피로 수명을 분석하였다.

• Food Science and Biotechnology
• /
• 제18권4호
• /
• pp.954-958
• /
• 2009

Effects of controlled- and uncontrolled-pH operations on phenylalanine ammonia lyase (PAL) production by a recombinant Escherichia coli strain were investigated at uncontrolled-pH ($pH_{UC}$) and controlled-pH ($pH_C$) of 5.5, 6.0, 6.5, 7.0, 7.5, 8.0, and 8.5 in bioreactor systems. The results showed that the recombinant PAL activity was improved significantly by controlled pH strategy. Among the $pH_C$ operations, the highest PAL activities were obtained under $pH_C$ 7.5 strategy where cell mass ($OD_{600\;nm}$) and PAL activity was 1.3 and 1.8 fold higher than those of $pH_{UC}$, respectively. The maximum PAL activity reached 123 U/g. The $pH_C$ 7.5 strategy made recombinant plasmid more stable and therefore allowed easier expression of PAL recombinant plasmid, which increased PAL production. It was indicated that the new approach (controlled-pH strategy) obtained in this work possessed a high potential for the industrial production of PAL, especially in the biosynthesis of L-phenylalanine.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.572-572
• /
• 2012

Growth of metal oxides on graphene may lead to a better understanding of delicate effects of their growth habits on their underlying physics. The vanadium dioxide ($VO_2$) is well known for its metal-to-insulator transition accompanied by a reversible first order structural phase transition at 340 K. This transition makes $VO_2$ a potentially useful material for applications in electrical and optical devices. We report a successful growth of $VO_2$ nanostructures on a graphene substrate via a vapor-solid transport route. As-grown $VO_2$ nanostructures on graphene were systematically characterized by field emission scanning electron microscopy, x-ray diffraction, Raman spectroscopy, FT-IR spectroscopy and high resolution transmission electron microscopy. These results indicate that the strain between $VO_2$ and graphene layers may be easily controlled by the number of underlying graphene layer. We also found that the strain in-between $VO_2$ and graphene layer affected its metal-to-insulator transition characteristics. This study demonstrates a new way for synthesizing $VO_2$ in a desired phase on the transparent conducting graphene substrate and an easy pathway for controlling metal-to-insulator phase transition via strain.

• 한국자동차공학회논문집
• /
• 제3권1호
• /
• pp.1-12
• /
• 1995

Isothermal and thermal-mechanical fatigue characteristics of 12Cr heat resisting steel used for high temperature applications were investigated including hold time effects. Isothermal low cycle fatigue test at $600^{\circ}C$ and in-phase, out-of-phase thermal-mechanical fatigue test at 350 to $600^{\circ}C$ were conducted using smooth cylindrical hollow specimen under strain-control with total strain ranges from 0.006 to 0.015. Regardless of thermal-mechanical and isothermal fatigue tests, cyclic softening behavior was observed and much more pronounced in the thermal-mechanical fatigue tests with hold times due to the stress relaxation during the hold time. The phase difference between temperature and strain in thermal-mechanical fatigue tests resulted in significantly shorter fatigue life for out-of-phase compared to in-phase. The differences in fatigue lives were dependent upon the magnitudes of plastic strain ranges and mean stresses. During the hold time in the strain-controlled fatigue tests, the increase in the plastic strain range and the stress relaxation were observed. It appeared that the increase in plastic strain range per cycle and the introduction of creep damage made important contributions to the reduction of thermal-mechanical fatigue life with hold time, and the life reduction tendency was more remarkable in the in-phase than in the out-of-phase thermal-mechanical fatigue. Isothermal fatigue tests performed under the combination of fast and slow strain rates at $600^{\circ}C$ showed that the fatigue life decreased as the strain rate and frequency decreased,especially for the low strain ranges.

• 한국자동차공학회논문집
• /
• 제1권1호
• /
• pp.131-139
• /
• 1993

Low cycle fatigue characteristics of cast aluminum alloy A356 with a yield strength and ultimate strength of 229 and 283 MPa respectively was evaluated using smooth axial specimen under strain controlled condition. Reversals to failure ranged from 16 to 107. The cast aluminum alloy exhibited cyclically strain-gardening behavior. The results of low cycle fatigue tests indicated that the conventional low cycle fatigue tests indicated that the conventional low cycle fatigue life model was not a satisfactory representation of the data. This occurred because the elastic strain-life curve was not-log-log linear and this phenomena caused a nonconservative and unsafe fatigue life prediction at both extremes of long and short lives. A linear log-log total strain-life model and a bilinear log-log elastic strain-life model were proposed in order to improve the representation of data compared to the conventional low cycle fatigue life model. Both proposed fatigue life models were statistically analyzed using F tests and successfully satisfied. However, the low cycle fatigue life model generated by the bilinear log-log elastic strain-life equation yielded a discontinuous curve with nonconservatism in the region of discontinuity. Among the models examined, the linear log-log total strain-life model provided the best representation of the low cycle fatigue data. Low cycle fatigue life prediction method based on the local strain approach could conveniently incorporated both proposed fatigue life models.

• Journal of Welding and Joining
• /
• 제8권4호
• /
• pp.46-57
• /
• 1990

TMCP steel manufactured by controlled rolling followed by accelerated cooling process is known to have extra-ordinary mechanical properties such as tensile strength and toughness. However, there is much uncertainty about the fatigue fracture characteristics, especially, in the welded state of this steel. In case of this steel, the softening zone by welding is generated in heat affected zone in contrast with the case of conventional normalized high strength steel. This softening zone is considered to play significant roles in low cycle fatigue fracture of the welded part of this steel. In this paper, the low cycle fatigue behaviors of TMCP steel were inspected in as-received and welded state using the smooth specimen. The fatigue life-time was seperately investigated on the basis of failure of the specimen and crack initiation which is detected by differential strain method. Moreover, the low cycle fatigue characteristics of TMCP steel were quantitatively compared with those of the conventional normalized steel of same strength level.

• 한국지반공학회논문집
• /
• 제32권12호
• /
• pp.15-22
• /
• 2016

본 연구에서는 Strain wedge 해석모델을 이용하여 수평하중이 작용하는 단말뚝의 극한수평저항력 산정식을 제안하였다. 저항특성은 쐐기 후면부의 수평저항토압, 쐐기 측면부의 전단저항, 그리고 말뚝과 지반의 마찰저항으로 구분하였고, 이들의 합으로써 극한수평저항력을 산정하였다. 제안된 식을 기존의 쐐기 이론과 현장실험, 유한차분법과비교 분석하였다. 그 결과 제안식의 값이 기존의 쐐기 이론과 1.03%, 현장실험과는 0.40~3.32%, 유한차분법과는 6.02%의 차이를 보였다.

• 대한기계학회논문집B
• /
• 제21권9호
• /
• pp.1174-1184
• /
• 1997

Extinction characteristics of pure hydrogen-oxygen diffusion flames, at high pressures in the neighborhood of the critical pressure of oxygen, is numerically studied by employing counterflow diffusion flame as a model flame let in turbulent flames in rocket engines. The numerical results show that extinction strain rate increases almost linearly with pressure up to 100 atm, which can be explained by comparison of the chain-branching-reaction rate with the recombination-reaction rate. Since contributions of the chain-branching reactions, two-body reactions, are found to be much greater than those of the recombination reactions, three-body reactions, extinction is controlled by two-body reactions, thereby resulting in the linearity of extinction strain rate to pressure. Therefore, it is found that the chemical kinetic behaviors don't change up to 100 atm. Consideration of the pressure fall-off reactions shows a slight increase in extinction strain rate, but does not modify its linearity to pressure. The reduced kinetic mechanisms, which were verified at low pressures, are found to be still valid at high pressures and show good qualitative agreement in prediction of extinction strain rates. Effect of real gas is negligible on chemical kinetic behaviors of the flames.