• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.9
• /
• pp.1073-1084
• /
• 1999

The effects of secondary flow on the structure of a turbulent wake generated by a flat plate was investigated experimentally. The secondary flow was induced In a $90^{\circ}$ curved duct in which the flat plate wake generator was installed. The wake generator was installed in such a way that the wake velocity gradient exists in the span wise direction of the curved duct. Measurements were made in the plane containing the mean radius of curvature where pressure gradient and curvature effects were small compared with the secondary flow effect. All six components of the Reynolds stresses were measured in the curved duct. Turbulence intensities in the curved wake are higher than those in the straight wake due to an increase of the turbulent kinetic energy production by the secondary flow. In the inner wake region, shear stress and strain in the plane containing the velocity gradient of the wake show opposite signs with respect to each other, so that eddy viscosity Is negative in this region. This indicates that gradient-diffusion type turbulence models are not appropriate to simulate this type of flow.

• Korean Journal of Human Ecology
• /
• v.15 no.1
• /
• pp.129-139
• /
• 2006

The purpose of this study is to compare the hairstyles between Korean and Australian women, who have different individual hair characteristics, social backgrounds, and culture from each other. Data were collected through a survey of 208 Australian females and 392 Koreans. Frequency analysis, t-test, and two-way ANOVA were used to analyze the data. The results are as follows: Korean and Australian women maintain a hairstyle for six months or less in most of the cases. They preferred a hairstyle with bang, and the elderly especially a shorter hair length. Choosing their hairstyles depended on such factors as hair length, dyeing, form of face, harmony with clothing, and social status. There was no difference, however, in a preferred hair length. Korean women possessed brown and black hair colors in a descending order, whereas Australians light blonde and brown in a descending order as well. There was a big difference in the preference for a permanent wave. Korean women preferred to give a volume or curl to their hair, while Australians wanted to have a straight hair. According to the study on a hairstyle behavior, it was found that there were differences in fashion and individuality between two countries and also in dependency among age groups, whereas no differences existed in beauty.

• Journal of International Academy of Physical Therapy Research
• /
• v.2 no.2
• /
• pp.324-328
• /
• 2011

The purpose of this study is to measure the effect of change in heel height on lower extremities activity of young women on high-heeled shoes that young women prefer from more kinetic and realistic perspective as this study changes the degree of slope on a treadmill. The study subjects are 15 young and healthy women who do not have any external injuries or problem with walking and understand the purpose of this study clearly. They wore three different height of heels(1cm, 7cm, 12cm) and walked on a treadmill at a constant speed of 3km/h. EMG value of four muscles (anterior tibial muscle, gastrocnemius muscle, straight muscle of thigh, and biceps muscle of thigh) were collected when walking and the change according to the height of heels were analyzed using one-way ANOVA. Multiple comparison analysis on anterior tibial muscle and heel height showed that the group with 12cm heel showed significantly high muscle activation compared to the groups with 1cm and 7cm heels. The result of this study can be used for various perspectives from inferring and mediating problems caused by wearing high heels on different ground slopes for a long time.

• Proceedings of the Korean Environmental Health Society Conference
• /
• 2002.04a
• /
• pp.52-54
• /
• 2002

Generally, inaccurate reports on environmental issues occur due to various factors. The purpose of this study was to find out a way to enhance accuracy of environmental reporting. So the reporters' career and college major had been compared to the accuracy of their articles. The by-lined environmental articles in nine dailies published in 1991 were checked. Results of this study were as follows. (1) Inaccuracy rate in environmental articles was 54.2％. Inaccuracies appeared 1.7 times per an article, while the average frequency of inaccuracies in overall articles was 0.9 time. (2) Errors in the articles consist of 65.8％ of subjective inaccuracies and 34.2％ of subjective inaccuracies. They derive from the false usage of terminology(15.8％), misquotation(14.5％), incorrect statistics(13％), exaggeration(13％), inaccurate title(7.9％), and false comparison(5％), (3) Inaccuracy rate by the type of articles was 66.7％ in columns, 60％ in feature stories, 54.5％ in-depth stories, 40.9％ in straight news, respectively. (4) Inaccuracy rate by the specific field was shown 71.4％ in environmental impacts (5) According to the result of chi-square test analysis, there were no statistically significant differences of inaccuracy rate and of subjective, and objective, and objective inaccuracies relevant to the period of reporters' career covering environmental reporting and the nature of articles, and college major.

• Structural Engineering and Mechanics
• /
• v.5 no.3
• /
• pp.257-268
• /
• 1997

The elastic deflections and Euler buckling loads are investigated for a class of tapered and initially curved cantilevered beams subjected to loading at the tip. The beam's width increases linearly and its depth decreases linearly with the distance from the fixed end to the tip. Unloaded, the beam forms a circular are perpendicular to the axis of bending. The beam's deflection responses, obtained by solving the differential equations in closed form, are presented in terms of four nondimensional system parameters: taper ratio ${\kappa}$, initial shape ratio ${\Delta}_0$, end load ratio f, and load angle ${\theta}$. Laboratory measurements of the Euler buckling loads for scale models of tapered initially straight, corrugated beams compared favorably with those computed from the present analysis. The results are applicable to future designs of the end structures of highway guardrails, which can be designed to give the appropriate balance between the capacity to deflect a nearly head-on vehicle back to its right-of-way and the capacity to buckle sufficiently that penetration of the vehicle may be averted.

• Korean journal of applied entomology
• /
• v.33 no.1
• /
• pp.33-38
• /
• 1994

The expenment was conducted to study the foraging behavior of Amblyseius hngisp~nosus for eggs of Tetranychus urticoe. When preys were abundant, A. longispinosus repeated a series of foraging process (feeding, after-feeding movement, restmy, and searching) The time (Mean\ulcorner SD) spent for these components were 6 83+ 1.73. 3 OOi 1.66. 93.57+ 30 19. and -0.00 min., respectively. Afterfeeding movement was chractetired as a complex one-way circular moving path with a slow speed (0.09 mm/sec) and area-restricted Escaping movement was fast (0 31 mm/sec), more straight in direction, and edge-oriented walking. Positions of prey consumption of A. longispinosus were distributed in clump. KEY WORDS Foraging behavior, nlovlng path, Arnblyseius longispinosus, Tetranychus urtlcae.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.2
• /
• pp.95-102
• /
• 2007

This study attempts to propose ways for activated methods of Sancheong tourist resort with Traditional Oriental Medicine(the following this resort) by examining the placement plan, space plan and characteristics of this resort. The results of this study are as follow. First, the accessibility has to be improved for safe and quick transportation between this resort and nearby areas. The curved roads must be replaced by straight roads at least partially. Second, an experiencing space like herb farm is necessary to activate the function of the tourist resort in the aspect of the arrangement planning for this resort. Third, the roads within the complex must be improved into Ring Roads for the circulation of cars to use the space in the tourist resort in a reasonable and positive way. Fourth, various places for tourism must be developed in the rear for sightseeing tours. Moreover, the development of tourism area together with the residents must be achieved with the active participation of the local people in the festival.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.12
• /
• pp.1223-1228
• /
• 2010

The conventional noise control attempts to simply reduce the level of product noise. But it is very straight forward way that we have considered human perception on noise. Since human listening is very sensitive to sound. Evaluation of the sound quality of a vacuum cleaner is studied base on human sensibility engineering. In this paper, we choose six vacuum cleaners that are sold in Korea and reduced noise control. The sound quality of vacuum cleaner noise is analyzed by employing the subjective evaluation and by representing them in terms of the objective quantities. Semantic differential method is used to study sound quality Evaluation. To analyze the sound quality of vacuum cleaner noise, consider the coefficients of correlation between sound metrics and subjective rating. The linear regression models were obtained for the subjective evaluation and sound quality metrics.

• Journal of Powder Materials
• /
• v.23 no.2
• /
• pp.102-107
• /
• 2016

We demonstrate the electrochromic properties of $TiO_2$ nanotubes prepared by an anodization process and investigate the effects of heat treatment and viologen incorporation on them. The morphology and crystal structure of anodized $TiO_2$ nanotubes are investigated by scanning electron microscopy and X-ray diffraction. As-formed $TiO_2$ nanotubes have straight tubular layers with an amorphous structure. As the annealing temperature increases, the anodized $TiO_2$ nanotubes are converted to the anatase and rutile phases with some cracks on the tube surface and irregular morphology. Electrochemical results reveal that amorphous $TiO_2$ nanotubes annealed at $150^{\circ}C$ have the largest oxidation/reduction current, which leads to the best electrochromic performance during the coloring/bleaching process. Viologen-anchored $TiO_2$ nanotubes show superior electrochromic properties compared to pristine $TiO_2$ nanotubes, which indicates that the incorporation of a viologen can be an effective way to enhance the electrochromic properties of $TiO_2$ nanotubes.

• Journal of the Korean Society of Safety
• /
• v.21 no.2 s.74
• /
• pp.80-88
• /
• 2006

In the present study damage behavior of resilient sleepers on concrete ballasts is analyzed. Cracks of resilient sleepers in a railway track system are concentrated on inside of blocks to which the tie bars are connected. Finite element analysis is performed by dividing a block into the straight section and the curved section according to the load condition of the resilient sleeper, and limited the interpretation within the range of resilience. In addition, the value of stress obtained from the interpretation was compared with the allowable stress of concrete to determine the safety. According to the result of numerical analysis, compared with the stress before unequal settlement, the tensile stress of the inside of the block increased significantly after the settlement considering the entire block, and the tensile stress of this part exceeded the allowable stress of concrete, so was undesirable in terms of safety. In reality, the arrangement of tensile stiffeners inside blocks connected to tie bars is improper in the design of resilient sleepers, and when unequal settlement occurs, tensile stress increases on this part and consequently causes cracking damage. It is necessary to arrange wire meshes or tensile reinforcing bars in a structurally safe way to reinforce the inside of blocks on which cracks are concentrated.