• 상하수도학회지
• /
• 제25권3호
• /
• pp.407-417
• /
• 2011

Nowadays, the high land use, mainly used for urbanization, is affecting runoff loads of non-point pollutants to increase. According to this fact, increasing runoff loads seems like to appear that it contributes to high ratio of pollution loads in the whole the pollution loads and that this non-point source is the main cause of water becoming worse quality. Especially, concentrated pollutants on the impermeable roads run off to the public water bodies. Also the coefficient of runoff from roads is high with a fast velocity of runoff, which ends up with consequence that a lot of pollutants runoff happens when it is raining. Therefore it is very important project to evaluate the quantity of pollutant loads. In this study, I computed the pollutant loadings depending on time and rainfall to analyze characteristics of runoff while first flush storm water and evaluated the runoff time while first flush storm water and rainfall based on the change in curves on the graph. I also computed contribution ratio to identify its impact on water quality of stream. I realized that the management and treatment of first flush storm water effluents is very important for the management of road's non-point source pollutants because runoff loads of non-point source pollution are over the 80% of whole loads of stream. Also according to the evaluation of runoff loads of first flush storm water for SS, run off time was shown under the 30 minute and rainfall was shown under the 5mm which is less than 20% of whole rainfall. These are under 5mm which is regarded amount of first flush storm water by the Ministry of Environment and it is judged to be because run off by rainfall is very fast on impermeable roads. Also, run off time and rainfall of BOD is higher than SS. Therefore I realized that the management of non-point source should be managed and done differently depending on each material. Finally, the contribution ratio of pollutants loads by rainfall-runoff was shown SS 12.7%, BOD 12.7%, COD 15.9%, T-N 4.9%, T-P 8.9%, however, the pollutants loads flowing into the steam was shown 4.4%. This represents that the concentration of non-point pollutants is relatively higher and we should find the methodical management and should be concerned about non-point source for improvement on water quality of streams.

• 한국습지학회지
• /
• 제18권2호
• /
• pp.183-193
• /
• 2016

본 연구에서는 고속도로 강우유출수 처리목적의 우드칩 충진 침투도랑 모니터링 연구를 통하여 설계 적정성 및 성능을 평가하였다. 강우시 모니터링 자료를 바탕으로 침투도랑의 평균 저감효율을 산정한 결과 TSS 88%, COD 94%, BOD 85%, TN 80%, TP 75%이었으며 강우조건 및 설계가 다르므로 국내외 다른 연구결과와 직접적인 비교는 어렵지만 개략적으로 유사한 저감성능을 보였다. 침투도랑의 가장 중요한 설계인자인 침투속도를 산출한 결과 강우강도가 증가함 따라 침투속도도 증가하였으며 평균 침투속도는 40mm/hr, 도랑 내부의 유효 저류수심 0.8m를 기준으로 침투시간을 산출한 결과 약 0.83일로 비점오염저감시설 설치 및 관리 운영 매뉴얼(MOE, 2014)의 설치기준(이하 설치기준)을 만족하는 것으로 나타났다. 수문자료에 따르면 유입량 기준으로 설계 누적강우유출고로 산출된 WQv와 유사한 유입량을 기록한 관측자료에 따르면 전량 저류, 침투되어(유출량$${\frac{._-}{.}}$$0) 침투식 LID 시설로서의 고유한 기능적 목표를 달성하였으므로 설계 누적강우유출고 5mm는 타당하다고 판단된다. 침투도랑은 강우시 일시적으로 여과 및 저류과정에서 침수가 이루어지며 완전침투가 24시간 이내에 종료되므로 우드칩으로 부터 유기물질 등의 용출가능성은 희박하며 현장 모니터링 자료에서도 용출기미는 나타나지 않았다. 따라서 추후 침투도랑 설치기준의 개정시 국내외 연구자료를 바탕으로 여재로서 우드칩의 적용을 면밀히 검토할 필요가 있다.

• 대한환경공학회지
• /
• 제38권4호
• /
• pp.210-218
• /
• 2016

대전의 관평천에 설치된 1.8 m 높이의 침강 실험장치를 이용하여 총 4회에 걸쳐 강우 유출수를 채취하여 오염물질제거 효율 및 특성을 측정하였다. 오염물질 농도는 초기 4시간 동안 급격하게 감소하였으며 약 24시간 후 일정한 수준을 나타내는 경향을 보였다. 침전 실험 장치 내에서는 높이 별 농도가 크게 다르지 않은 것으로 관찰되었으며 이는 침전장치 내에서 대부분의 고형물질은 서로 방해하지 않고 독립적으로 침전하기 때문인 것으로 분석된다. 강우 유출수를 대상으로 분석한 입도는 $10{\sim}100{\mu}m$의 범위로 나타났다. 강우 유출수내에서 TP의 경우 입자성 물질이 평균 52.4%, TN의 경우 23.5%의 비율로 나타났으며 TN의 경우 침강에 의해 효율적으로 제거되기 어렵다는 것을 확인하여 주고 있다. 본 연구의 결과는 초기 강우 유출수에 포함되어 있는 TSS와 TP와 같은 오염물질이 단순한 침강에 의해 효과적으로의 제거될 수 있다는 것을 나타내고 있으며 하천수질을 보호하는데 적극적으로 활용될 수 있음을 시사한다.

• 한국습지학회지
• /
• 제15권3호
• /
• pp.407-412
• /
• 2013

본 연구는 Low Impact Development (LID) 시설로서 도로에 적용 가능한 수목여과시설을 개발 하고자 수행되었다. 수목여과시설의 적용가능성 및 효과 검증을 위해 Test-bed 규모의 시설을 조성하여 총 17개월(2011년 6월 ~ 2012년 11월)동안 모니터링을 수행하였다. 모니터링 결과, 누적강우량 2 mm 이하의 강우시 발생되는 강우유출량은 시설내 전량 저류 되며 20 mm 이상일 경우 유입유량의 최소 20%가 시설내 저류 되는 것으로 분석되었다. 강우량에 따른 오염물질별 저감효과를 분석한 결과, Total Pb는 70% 이상의 저감효율을 보여 오염물질 중에서 저감효과가 가장 뛰어난 것으로 나타났으며 중금속, 입자상 물질, 영양염류 및 유기물 순으로 저감효과가 높은 것으로 조사되었다. 오염물질별 평균 저감효율은 60~73%의 범위로 나타났으며 소규모 강우(10 mm 미만의 강우)시 10 mm 이상의 강우 일 때 보다 오염물질이 함유된 강우 유출수가 시설 내에서 충분히 저류되기에 오염물질 저감에 효과적인 것으로 분석되었다. 본 연구결과를 활용하여 강우량, 오염물질 저감효율과 같은 LID 시설의 설계인자를 도출할 수 있었으며 물순환 효과 및 오염물질의 효율평가를 통하여 향후 본 시설과 유사한 시설의 설계시 활용 가능성이 높은 것으로 판단된다.

• 상하수도학회지
• /
• 제23권6호
• /
• pp.719-726
• /
• 2009

One of the alternative runoff management measures is on-site runoff mitigation, such as rainwater retention tank and infiltration facilities especially the latter that is possible to manage simultaneously runoff quality and quantity as a perspective of water-cycle. This study was conducted to develop a particle separator, inclined-pipe settling system, that could improve particle removal efficiency of road runoff as a pre-treatment device of stormwater infiltration. Solid particles larger than $100{\mu}m$ are separated by simple sedimentation; however, the significant amount of pollutants with a diameter less than $100{\mu}m$ remain in suspension. Without any treatment in that case of the runoff into infiltrate, groundwater would be deteriorated and also infiltration rate would be decreased by clogging. Therefore, we suggest optimal design parameters (inclined angle, pipe length, and surface loading rate) of inclined-pipe settling system which can be designed to effectively remove particles diameter smaller then $70{\mu}m$. Thus, the results showed TSS removal efficiency more than 80% with a particle diameter between $20{\mu}m$ and $70{\mu}m$, 100% above particle diameter $70{\mu}m$ for the inflow rate $0.018 m^3/m^2{\cdot}hr$ with pipe inclined at angle $15^{\circ}$.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.45-55
• /
• 2019

Climate change has significantly affected the rainfall characteristics which can influence the pollutant build-up and wash-off patterns from the catchment. Therefore, this study explored the influence of varying rainfall characteristics on urban and agricultural runoff pollutant export using statistical approaches. For this purpose, Mann-Kendall and Pettitt's test were applied to detect the trend and breakpoint in rainfall characteristics time series. In addition, double mass curve and correlation analysis were used to drive the relationship between rainfall-runoff and pollutant exports from both catchments. The results indicate a significant decreased in total rainfall and average rainfall intensity, while a significant increased trend for antecedents dry days and total storm duration over the study periods. The breakpoint was determined to be 2013 which shows remarkable trend shifts for total rainfall, average rainfall intensity and antecedents dry days except total duration. Double mass curve exhibited a straight line with significant rainfall-runoff relationship indicates a climate change effect on both sites. Overall, higher pollutant exports were observed at both sites during the baseline period as compared to change periods. In agricultural site, most of the pollutants exhibited significant (p< 0.05) association with total rainfall, average rainfall intensity and total storm duration. In contrast, pollutants from urban site significantly correlated with antecedent dry days and average rainfall intensity. Thus, total rainfall, average rainfall intensity and total duration were the significant factors for the agricultural catchment while, antecedents dry days and average rainfall intensity were key factors in build-up and wash-off from the urban catchment.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.13-17
• /
• 2019

This study was conducted to analyse the application of pollutant build-up model on various urban landuses and to characterize pollutant build-up on urban areas as a source of stormwater runoff pollution. The monitored data from impervious surfaces in urban areas such as commercial (8 sites), industrial (10 sites), road (8 sites), residential (10 sites), recreational (5 sites) from 2008 to 2016 were used for the analysis of pollutant build-up model. Based on the results, the average runoff coefficients vary from 0.35 to 0.61. In all landuses except recreational landuse, the runoff coefficient is 0.5 or more, which is the highest in the commercial area. Commercial landuse where pollutants occur at the highest EMC in all landuse, and it is considered that NPS management is necessary compared with other landuses. The maximum build-up load for organic matter (BOD) was highest in the commercial area ($4.59g/m^2$), and for particular matter (TSS) in the road area ($5.90g/m^2$) while for nutrient (TN and TP) in the residential area ($0.40g/m^2$, $0.14g/m^2$). The rate constants ranged from 0.1 to 1.3 1/day depending on landuse and pollutant parameters, which means that pollutant accumulation occurs between 1 and 10 days during dry day. It is clear that these build-up curves can generally be classified based on landuse. Antecedent dry day (ADD) is a suitable and reasonable variable for developing pollutant build-up functions. The pollutant build-up curves for different landuse shows that these build-up curves can be generally categorized based on landuse.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.91-97
• /
• 2019

Application of bioretention systems in Korea is highly considered due to its minimal space requirements, appropriateness as small landscape areas and good pollutant removal and peak hydraulic flow reduction efficiency. In this study, the efficiency of two lab-scale bioretention types having different physical properties, media configuration and planted with different shrubs and perennials was investigated in reducing heavy metal pollutants in stormwater runoff. Type A bioretention systems were planted with shrubs whereas type B were planted with perennials. Chrysanthemum zawadskii var. latilobum (A-CL) and Aquilegia flabellata var. pumila (A-AP) respectively were planted in each type A bioretention reactors while Rhododendron indicum linnaeus (B-RL) and Spiraea japonica (B-SJ), respectively were planted in each type B bioretention reactors. Results revealed that the four lab-scale bioretention reactors significantly reduced the influent total suspended load by about 89 to 94% (p<0.01). Type B-RL and B-SJ reactors reduced soluble Cr, Cu, Zn, and Pb by 28 to 45% that were 15 to 35% greater than the soluble metal reduction of type A-CL and A-AP reactors, respectively. Among the pollutants, total Cr attained the greatest discharged fraction of 0.52-0.81. Excluding the effect of soil media, total Pb attained the greatest retention fraction in the bioretention systems amounting to 0.15-0.34. Considering the least discharge fraction of heavy metal in the bioretention system, it was observed that the bioretention systems achieved effectual reduction in terms of total Cu, Zn and Pb. These findings were associated with the poor adsorption capacity of the soil used in each bioretention system. The results of this study may be used for estimating the maintenance requirements of bioretention systems.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.130-130
• /
• 2021

The increasing effect of urbanization has been more apparent through flooding and downstream water quality especially from heavy rainfalls. In response, stormwater runoff management solutions have focused on runoff volume reduction and treatment through infiltration. However, there are areas with low infiltration soils or are experiencing more dry days and even drought. In this study, a lab-scale infiltration system was used to compare the applicability of two types of soil as base layer in gravel-filled infiltration systems with emphasis on runoff capture and suspended solids removal. The two types of soils used were sandy soil representing a high infiltration system and clayey soil representing a low infiltration system. Findings showed that infiltration rates increased with the water depth above the gravel-soil interface indicating that the available depth for water storage affects this parameter. Runoff capture in the high infiltration system is more affected by rainfall depth and inflow rates as compared to that in the low infiltration system. Based on runoff capture and pollutant removal analysis, a media depth of at least 0.4 m for high infiltration systems and 1 m for low infiltration systems is required to capture and treat a 10-mm rainfall in Korea. A maximum infiltration rate of 200 mm/h was also found to be ideal to provide enough retention time for pollutant removal. Moreover, it was revealed that low infiltration systems are more susceptible to horizontal flows and that the length of the structure may be more critical that the depth in this condition.

• 한국습지학회지
• /
• 제20권4호
• /
• pp.424-431
• /
• 2018

강우유출수 내 포함된 입자상 물질, 유기물, 영양물질, 중금속 등의 오염물질은 수계에 악영향을 미친다. 이러한 강우유출수 내 포함된 오염물질 감소와 처리를 위해 최적관리기법(BMP)을 도입하고 있으며, 비용효율적인 방법으로 평가되고 있다. 하지만, 잘못된 설계와 유지관리 부족은 시설의 성능을 저하시켜 원활한 기능을 수행하지 못하고 있는 실정이다. 따라서, 본 연구에서는 지속적인 유지관리가 진행된 침투도랑(IT)의 시설에 대한 평가를 수행하였다. 2009년부터 2016년까지 총 41회의 모니터링을 수행하였으며 침투도랑(IT)의 오염물질 저감효율 평가를 수행하였다. 수질 및 수문학적 분석결과, 시설에 유입되는 유입수는 단위 오염 부하량에 영향을 미치는 요인으로 나타났다. 또한, 계절의 변화는 오염물질 저감능력에 영향을 미치는 것으로 분석되었다. 여름철 강수량 및 강우강도의 증가로 인해 Overflow 및 유량의 증가가 발생되었으며, 이로 인해 저감효율이 감소하였다. 또한, 겨울철 낮은 온도로 인해 여재 및 화학적 메카니즘의 효과 감소로 오염물질 저감 효율이 감소되는 것으로 분석되었다. 침투도랑(IT)의 유지관리는 시설의 효율에 영향을 미치는 것으로 평가되었다. 시설 설치 이후 2년 동안 유지관리 부족으로 오염물질 저감효율이 낮은 것으로 나타났으며, 일부 모니터링에서 지오텍스타일 내 제거 되지 않은 퇴적물로 인해 오염물질 저감효율의 감소를 보였다. 본 연구를 통하여, 시설의 유지관리는 오염물질 저감효과에 영향을 미치는 것으로 나타났으며, BMP 시설의 최적 유지관리 기간 및 방법 등은 향후 유용한 자료로 사용 될 수 있을 것으로 사료된다.