• 제목/요약/키워드: Storing

검색결과 1,934건 처리시간 0.031초

광정보저장용 광픽업 대물렌즈 성형용 초경합금 (Co 0.5%) 초정밀절삭 특성(I) (The property of WC(Co 0.5%) ultra precision turning for optical pick-up objective lens molding press for optical infomation storing(I))

  • 김민재;이준기;황연;김혜정;김정호
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.178-178
    • /
    • 2009
  • High-density optical information storing equipment, which is using Blu-ray, is the next generation information storing equipment that has about form six times to thirty-five times capacities. and high-density optical information storing equipment uses high NA(Numerical Aperture) aspheric glass objective lens as optical pick-up equipment to record and recognize high-density date. Generally this objective lens is developed and produced through a way of GMP(Glass Molding Press) that uses molding core that is performde by Ultra precision grinding, but grinding performing that has high-accuracy is very difficult because objective lens form is high NA. In this research, we preformed Ultra precision turning, using single crystal diamond bite, about WC(Co 0.5%), sintering brittleness material that is used molding core's material for GMP. and we confirmed aspheric glass lens compression of deformities molding core's Ultra precision turning possibility by measuring surface roughness(Ra) and processing surface's condition.

  • PDF

실시간 데이터 저장을 위한 SD 메모리 카드 설계 (Design of SD Memory Card for Read-Time Data Storing)

  • 문지훈
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2011년도 춘계학술대회
    • /
    • pp.436-439
    • /
    • 2011
  • 휴대용 디지털 기기 보급의 확산되면서 휴대용 저장장치 수요가 급증하고 있으며, 디지털 카메라 및 캠코더에서는 대부분 SD 메모리 카드를 이용하고 있다. SD 메모리 카드는 일반적으로 플래시 메모리를 기반으로 사용자 데이터를 저장한 후 PC에 데이터를 복사하는 형태로 사용되고 있다. 본 논문에서는 플래시 메모리에 데이터를 저장하는 방식이 아닌, 네트워크를 통하여 사진 및 영상 데이터 저장을 할 수 있는 SD 메모리 카드를 제안한다. SD Slave IP를 통해서 들어오는 데이터 및 메모리 주소 값들을 플래시 메모리로 보내지 않고 네트워크 서버에 전달하여, 실시간으로 SD 메모리에 저장할 데이터를 안전하고 편리하게 저장할 수 있다.

  • PDF

인공발(Prosthetic Foot) 스프링용 유리섬유강화 적층재의 적층배향에 따른 층간분리거동 해석 (Analysis of Delamination Behavior on the Stacking Sequence of Prosthetic Foot Keel in Glass fiber Reinforced Laminates)

  • 송삼홍;김철웅
    • 대한기계학회논문집A
    • /
    • 제27권4호
    • /
    • pp.623-631
    • /
    • 2003
  • It is considered that the application of advanced composite materials to the prostheses for the disables is important to improve their bio-mechanical performance. Particularly, energy storing foot prosthesis is mostly important to restore gait ability of the disables with low-extremity amputation since it could provide propulsion at terminal stance enhancing the disables ability to walk long distance even run and jump. Therefore, the energy storing spring of Prosthetic foot keel under cyclic bending moment use mainly of high strength glass fiber reinforced plastic. The main objective of this study was to evaluate the stacking sequence effect using the delamination growth rate(dA$_{D}$/dN) of energy storing spring in glass fiber reinforced plastic under cyclic bending moment. The test results indicated that the shape of delamination zone depends on stacking sequence in GFRP laminates. Delamination area(A$_{D}$) turns out that variable types with the contour increased non-linearly toward the damage zones.nes.

Ardulink 기반 MQTT를 이용한 센서 데이터 저장을위한 IoT 게이트웨이 설계 (Design of IoT Gateway for Storing Sensor Data using Ardulink based MQTT)

  • 라이오넬;장종욱
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 추계학술대회
    • /
    • pp.744-747
    • /
    • 2017
  • The Internet of things (IoT) needs to be an event-driven approach for efficient real time response and processing. An IoT gateway is sometimes employed to provide the connection and translation between devices and the cloud. Storing data in the local database, and then forwarding it on the cloud is a task to be relegated to a gateway device In this paper, we propose the design of the IoT gateway with Fog computing for storing data from sensors into a local database. In the procedure of designing storing tasks, we propose to use the interfacing software known as Ardulink MQTT bridge. MQTT is a protocol for sensors to publish data to the clients. When it comes to needing historical data, MQTT connector can push MQTT data into SQL database. We write an MQTT client and based on the message topic insert the values into a SQL Database The design of IoT gateway with Fog computing adds value because it provides processing of the data across multiple devices before it sends to the cloud.

  • PDF

농가의 미곡저장실태 (Investigation "On the Paddy Storage at the Farm Level")

  • 김용환;서상용;김성태;나우정;민영봉
    • Journal of Biosystems Engineering
    • /
    • 제5권1호
    • /
    • pp.33-42
    • /
    • 1980
  • This study was carried out to investigate the actual environmental paddy storage conditions in conventional Korean farm warehouses. The paddy storage conditions by the locations and sizes of warehouses were figured out. The effectiveness of the small insulated box for storing paddy was also examined. Observations were made at sixteen different warehouses located in Moonsan-Myeon, Jinyandg-gun, Gyungnam Province from July lst to September 28 th, the period which was considered to be the worst for storing grains. The results are as follows ; 1. the average temperatures of rough rice and air inside the warehouse were 0.9 and 0.7$^\circ$ higher than the outside air temperature. 2. The average relative humidity in warehouses was 1.5percent higher than that of the atomosphere. This fact resulted in the increased moisture content of grains. Therefore, the ventilation for equalizing the relative humidity of inside and outside of warehouses was required. 3. The dry matter of stored rough rice was decreased by 1.1 percent in average druing the observation period. In order to reduce the dry matter loss, application of new grain storing method ;hermetic storage or filling inert gas storage, was highly recommended. 4. Environmental conditions for storing rough rice in a warehouse located in a sloping site are, in general , better than those of a warehouse located in a flat site. But as far as the dry matter of rough rice was concerned, above situation is not always satisfactory. Because it is fairly frequent to observe the higher rate of moisture absorption by grains stored in a warehouse located in a sloping site. 5. Environmental conditions for storing rough rice in a large-scale warehouse were better than those in a small size warehouse. Therefore, it is advisible for farmers to store their grins in the large-scale warehouses commonly used by villagers. 6. It was undesirable to store rough in a insulated box.

  • PDF

가변 K진 완전트리와 RDF메타정보에 기반한 XML문서 저장 및 검색 프레임워크의 설계 및 구현 (A Design and Implementation of XML Document storing and retrieval Framework based on a variant k-ary complete tree and RDF Metadata)

  • 김규태;정회경;이수연
    • 한국정보통신학회논문지
    • /
    • 제7권4호
    • /
    • pp.612-622
    • /
    • 2003
  • XML문서가 표준 인터넷 문서로 정착되어 감에 따라 XML문서의 효율적인 저장과 검색의 필요성이 증대하고 있다. 이에 본 논문에서는 XML문서의 효과적인 저장 모듈과 검색 모듈, 그리고 이를 웹 상에서 연동해서 사용할 수 있는 연동 API로 구성된 XML문서의 저장 및 검색 프레임워크에 대한 연구를 하였다. 저장모듈에서는 가변 K진 완전트리를 기반으로 한 DTD 독립적인 분할-통합형 저장모델을 구현하였고, 검색 모듈에서는 RDF 메타정보를 통해 구축된 색인에 대해 XPath 질의를 수행하는 XPath처리기를 구현함으로써 좀더 의미 있는 구조 검색 기능을 구현하였으며, XML-RPC, HTTP의 GET, POST, PUT 방식 API와 SOAP 방식의 API로 구성된 웹 연동 모듈을 구현하였다.

대용량 이메일 서비스를 위한 분산 구조 기반의 SMTP 서버 (A Distributed Architecture Based SMTP Server for Large Email Service)

  • 김영종;곽후근;정규식
    • 정보처리학회논문지C
    • /
    • 제16C권5호
    • /
    • pp.597-604
    • /
    • 2009
  • SMTP(Simple Mail Transfer Protocol) 서버는 네트워크를 기반으로 사용자의 메일을 전달 해주거나 저장하기 위해 만들어졌다. SMTP 서버는 대규모 서비스를 운영하거나 사용자가 많은 경우 또는 많은 양의 메일을 처리해야 하는 경우에는 SMTP 서버들을 복수로 구성할 수 있어야 한다. SMTP 서버의 메일 저장 공간인 파일시스템을 분리함으로써 복수의 SMTP 서버로 구성하는 것이 가능하며, 이때 분리된 파일시스템을 각각의 SMTP 서버들이 공유하기 위해 NFS(Network File System)를 사용하게 된다. 그러나 NFS는 네트워크 기반의 파일시스템으로써 파일시스템이 가지는 특성을 모두 가지고 있기 때문에, SMTP 서버들이 메일 저장 공간 공유를 위해 사용할 경우 불필요한 작업들로 인해 오버헤드가 발생하게 된다. 본 논문에서는 소켓(Socket)을 통해 직접 작업하는 방식을 사용하여 NFS를 사용함으로 인해 발생하는 작업 오버헤드를 줄이는 방식을 제안한다. NFS를 사용함으로 인해 발생하는 오버헤드를 최소화하기 위해 직접 소켓 작업을 할 수 있도록, 정보 기반의 저장 공간 구조 및 메일 저장을 위한 프로토콜을 정의하였다. 제안된 방식은 Netscape에서 만든 Mailstone을 이용하여 실험을 수행하였고, 실험을 통하여 제안된 방식이 기존 방식에 비해 성능이 향상되었음을 확인하였다.

RDBMS를 이용한 XML 데이터의 혼합형 저장 기법 (A Hybrid Method of Storing XML Data Using RDBMS)

  • 전찬훈;강현철
    • 한국전자거래학회지
    • /
    • 제14권1호
    • /
    • pp.57-79
    • /
    • 2009
  • 웹 기반의 e-비지니스가 활성화되면서 웹 상의 데이터 교환 표준인 XML 데이터의 양이 폭발적으로 증가하고 있다. 현재 XML의 저장소로 가장 널리 사용되고 있는 RDB에 XML 데이터를 분해하여 저장하고 SQL을 통해 XML 질의를 처리하는 기법이 많이 연구되었지만, 대용량의 XML 데이터 저장에 따른 공간 부담을 어떻게 완화할 것인지에 대한 연구는 없었다. 본 논문에서는 XML 데이터를 분해하여 기존의 노드 단위로 저장하는 것과 더불어 자주 질의되지 않거나 시간의 경과 등으로 유효성이 떨어진 데이터를 서브트리 단위의 저장으로 전환할 수 있는 혼합형 저장 기법을 제시한다. 이를 바탕으로 XML 혼합형 저장 및 질의 처리 시스템을 설계 및 구현하고 기존의 노드 단위 저장 및 질의 처리 시스템과 공간 효율 및 질의 처리 성능을 실험을 통해 비교 평가함으로써 제시하는 기법의 효율성을 검증하였다.

  • PDF

Segmentation and Appearance Features Index for Digital Video Data

  • Yun, Hong-Won
    • Journal of information and communication convergence engineering
    • /
    • 제8권6호
    • /
    • pp.697-701
    • /
    • 2010
  • The numbers of digital video cameras are fast increased. Accordingly, digital video data management is becoming more important. Efficient storing method and fast browsing method still remains to be one of significant issue. In this paper, an optimized data storing process without losing information and an organized appearance features indexing method are proposed. Also, the data removing policy could be used to reduce large amount of space and it facilitates fast sequential search. The appearance features index constructs key information of moving objects to answer queries about what people are doing, particularly when, where and who they move. The evaluation results showed better performance in the transfer time and the saving in storage space.