• 제목/요약/키워드: Stored Grain

검색결과 102건 처리시간 0.026초

곡물저장창고에서 LED 트랩을 이용한 어리쌀바구미와 거짓쌀도둑거저리의 실증 유인효과 (Effect of LED trap on controlling Sitophilus zeamais and Tribolium castaneum in granary)

  • 송자은;이상계;이회선
    • Journal of Applied Biological Chemistry
    • /
    • 제59권2호
    • /
    • pp.129-132
    • /
    • 2016
  • 곡물저장창고에서 light emitting diode (LED) 트랩의 실증실험을 통하여 이용 가능성을 검토하기 위하여 어리쌀바구미와 거짓쌀도둑거저리의 유인효과를 평가하였고, 상업적 대조구 black light bulb (BLB) 트랩과 비교하였다. 그 결과 어리쌀바구미와 거짓쌀도둑거저리에 대해 red LED 트랩은 BLB 트랩보다 높은 유인활성을 나타내었으며, 곡물저장창고 외부에서 진행한 실험은 내부 실험보다 약 1.5배 높은 유인활성을 보여주었다. 이러한 결과를 바탕으로 red LED 트랩이 곡물저장창고에서 친환경 저곡해충 방제기술로써 적용 가능성을 보여주었다.

스마트 농업 구현을 위한 ICT기반 곡물 재배이력관리 시스템 (Grain cultivation traceability system using ICT for smart agriculture)

  • 김훈;김의웅;이효재
    • 한국정보전자통신기술학회논문지
    • /
    • 제13권5호
    • /
    • pp.389-396
    • /
    • 2020
  • 본 논문에서는 스마트 농업을 구현하기 위한 재배이력관리 시스템을 개발하여 구현하였으며, 특히 스마트 팜에서 재배하기 힘든 곡물의 재배이력을 관리하는 시스템을 고안하였다. 스마트디바이스를 기반으로 하는 모바일 및 웹 프로그램을 설계하였고, 수집되는 정보는 DB 서버에 저장되어 빅 데이터로 활용이 가능하다. 또한 모바일 장치의 GPS를 적용한 GIS/LBS기반의 전자지도(Vworld map)를 이용하여 실시간 위치정보와 농업활동 정보의 매칭이 가능하다. 현장에서 필요로 하는 재배이력정보 DB를 설계하여 농가, 농민, 재배정보를 관리자가 활용하기 쉽게 개발하였고, 모바일 및 웹 프로그램을 개발하여 현장에서 구현해보았다. 본 시스템은 노동력절감효과와 기후변화와 같은 변수에 대응하여 품질과 안전관리의 능력을 한 단계 높일 것으로 기대된다.

Behavior of sediment from the dam FERGOUG in road construction

  • Benaissa, Assia;Aloui, Zehour;Ghembaza, Moulay S.;Levacher, Daniel;Sebaibi, Yahia
    • Advances in concrete construction
    • /
    • 제4권1호
    • /
    • pp.15-26
    • /
    • 2016
  • In Algeria, wastes are often stored in such conditions that do not meet standards. Today and more than ever, we really must implement an environmentally management of wastes. Recovery of waste in Algeria has a considerable delay due to the absence of a policy favorable to the development of waste management. But many researchers have shown the possibility to reuse dredged sediments in road construction. Through Europe, recent research works have been already performed on dam sediments. Present study fits into the context of the valorization of dredged sediments from Fergoug dam. They are found in considerable quantities and mainly composed of mineral phases, organic matters and water. The reservoir sedimentation poses problems for the environment and water storage, dredging becomes necessary. Civil engineering is a common way of recycling for such materials. Dredged sediments have not the required mechanical characteristics recommended by the standards as GTR guide (LCPC-SETRA 1992). So as to obtain mechanical performance, dredged sediment can be treated with cement, lime, or replaced materials like quarry sand. An experimental study has been conducted to determine physical and mechanical characteristics of sediments dredged from dam. Then different mixtures of sediment and/or quarry sand with hydraulic binders are proposed for improving the grain size distribution of the mixes. Finally, according these mixtures, different formulations have been tested as alternative materials with dredged sediments.

Effect of mechanical alloying on the microstructural evolution of a ferritic ODS steel with (Y-Ti-Al-Zr) addition processed by Spark Plasma Sintering (SPS)

  • Macia, E.;Garcia-Junceda, A.;Serrano, M.;Hong, S.J.;Campos, M.
    • Nuclear Engineering and Technology
    • /
    • 제53권8호
    • /
    • pp.2582-2590
    • /
    • 2021
  • The high-energy milling is one of the most extended techniques to produce Oxide dispersion strengthened (ODS) powder steels for nuclear applications. The consequences of the high energy mill process on the final powders can be measured by means of deformation level, size, morphology and alloying degree. In this work, an ODS ferritic steel, Fe-14Cr-5Al-3W-0.4Ti-0.25Y2O3-0.6Zr, was fabricated using two different mechanical alloying (MA) conditions (Mstd and Mact) and subsequently consolidated by Spark Plasma Sintering (SPS). Milling conditions were set to evidence the effectivity of milling by changing the revolutions per minute (rpm) and dwell milling time. Differences on the particle size distribution as well as on the stored plastic deformation were observed, determining the consolidation ability of the material and the achieved microstructure. Since recrystallization depends on the plastic deformation degree, the composition of each particle and the promoted oxide dispersion, a dual grain size distribution was attained after SPS consolidation. Mact showed the highest areas of ultrafine regions when the material is consolidated at 1100 ℃. Microhardness and small punch tests were used to evaluate the material under room temperature and up to 500 ℃. The produced materials have attained remarkable mechanical properties under high temperature conditions.

Application of the SCIANTIX fission gas behaviour module to the integral pin performance in sodium fast reactor irradiation conditions

  • Magni, A.;Pizzocri, D.;Luzzi, L.;Lainet, M.;Michel, B.
    • Nuclear Engineering and Technology
    • /
    • 제54권7호
    • /
    • pp.2395-2407
    • /
    • 2022
  • The sodium-cooled fast reactor is among the innovative nuclear technologies selected in the framework of the development of Generation IV concepts, allowing the irradiation of uranium-plutonium mixed oxide fuels (MOX). A fundamental step for the safety assessment of MOX-fuelled pins for fast reactor applications is the evaluation, by means of fuel performance codes, of the integral thermal-mechanical behaviour under irradiation, involving the fission gas behaviour and release in the fuel-cladding gap. This work is dedicated to the performance analysis of an inner-core fuel pin representative of the ASTRID sodium-cooled concept design, selected as case study for the benchmark between the GERMINAL and TRANSURANUS fuel performance codes. The focus is on fission gas-related mechanisms and integral outcomes as predicted by means of the SCIANTIX module (allowing the physics-based treatment of inert gas behaviour and release) coupled to both fuel performance codes. The benchmark activity involves the application of both GERMINAL and TRANSURANUS in their "pre-INSPYRE" versions, i.e., adopting the state-of-the-art recommended correlations available in the codes, compared with the "post-INSPYRE" code results, obtained by implementing novel models for MOX fuel properties and phenomena (SCIANTIX included) developed in the framework of the INSPYRE H2020 Project. The SCIANTIX modelling includes the consideration of burst releases of the fission gas stored at the grain boundaries occurring during power transients of shutdown and start-up, whose effect on a fast reactor fuel concept is analysed. A clear need to further extend and validate the SCIANTIX module for application to fast reactor MOX emerges from this work; nevertheless, the GERMINAL-TRANSURANUS benchmark on the ASTRID case study highlights the achieved code capabilities for fast reactor conditions and paves the way towards the proper application of fuel performance codes to safety evaluations on Generation IV reactor concepts.

새누리 벼 품종 배경 lipoxygenase-3 결핍 자포니카 근동질계통 개발 (Development of Near-Isogenic Line of japonica Rice Cultivar Saenuri without Lipoxygenase-3)

  • 박현수;이건미;김기영;김정주;신운철;백만기;김춘송;박슬기;이창민;서정필;조영찬
    • 한국육종학회지
    • /
    • 제51권3호
    • /
    • pp.190-200
    • /
    • 2019
  • 벼의 Lipoxygenase-3 (LOX-3) 결핍은 벼의 저장 후 고미취 발생 저감에 효과가 있는 것으로 보고되었다. 우리나라 밥쌀용 품종의 저장 후 품질 향상을 위해 대면적 재배품종인 새누리 유전배경에 LOX-3가 결핍된 자포니카 근동질계통 개발을 위한 육종사업이 수행되었다. 1차 육종단계에서는 다우담을 LOX-3 결핍 수여친으로 활용하여 신동진과 1회 여교배 후 발색반응을 통해 LOX-3 결핍 계통을 선발하였고 약배양을 통해 조기에 고정계통 HR27873-AC12를 육성하였다. 2차 육종단계에서는 HR27873-AC12를 LOX-3 수여친으로 하고 새누리를 반복친으로 하여 1회 여교배 후 분자표지 선발과 농업형질에 대한 표현형 선발을 통해 HR28896-31-3-1-1 (이하 HR28896)를 선발하였다. 1, 2차 단계에서 육성된 HR27873-AC12와 HR28896 계통은 LOX-3가 결핍되어 있으나 재배품종으로 활용하기에는 열악형질이 수반되어 있었다. 3차 육종단계에서 HR28896계통과 새누리를 다시 교배하여 분자표지 선발과 표현형에 대한 강한 선발압을 적용하여 최종적으로 BC2F7세대 HR30960-186-2-1-2-1를 선발하여 전주624호로 계통명을 부여하였다. 분자표지 검정 결과 전주624호는 LOX-3가 결핍된 것으로 확인되었다. 전주624호는 중만생종으로 단간 내도복 직립초형에 벼흰잎마름병 및 줄무늬잎마름병에 저항성 계통으로 새누리와 농업형질 특성이 비슷하였다. 전주624호의 수량구성요소는 새누리와 대부분 같았으나 현미 천립중이 유의하게 감소하였고 수량성은 다소 낮았다. 전주624호의 외관품위는 새누리에 비해 좋았고 식미 특성은 비슷하였다. 406개 KASP 마커를 이용한 유전배경 분석 결과 전주624호는 새누리의 유전배경을 95.8% 회복하여 근동질계통으로 판단되었다. 전주624호는 새누리 품종 배경의 LOX-3가 결핍된 자포니카 근동질계통으로 최초 수여친인 다우담의 열약 형질 수반문제를 극복하였으며 새누리와 비슷한 농업형질 특성과 유전배경을 가지고 있어 저장 후 품질 향상을 위한 실용적인 재배품종, lox-3 도입을 위한 교배모본 및 유전자 효과 구명을 위한 유전재료로 활용될 것으로 기대된다.

온도와 포장재에 따른 백미의 저장가능기간 (Storage Period of Milled Rice by Packaging Materials and Storage Temperature)

  • 최윤희;정진일;정영근;김영두;하기용;고재권;김정곤
    • 한국식품저장유통학회지
    • /
    • 제12권4호
    • /
    • pp.310-316
    • /
    • 2005
  • 백미의 저장가능기간과 안전저장기간을 구명하기 위하여 동진벼와 호진벼를 0.05 m LDPE film bag과 0.1 mm tri-fold craft paper bag에 포장하여 저온과 상온에 저장하여 품질변화를 조사하였다. 저장온도가 높고 저장기간이 경과할수록 식미치와 백도는 급격히 감소하고 지방산도와 색도 b값은 증가하였고, 식미치, 지방산도, 색도 b값은 포장재보다는 저장온도에 의한 차이가 뚜렷하였으나 백도는 포장재에 의한 차이가 커서 craft paper bag 보다 LDPE film bag포장에서 높았다. Craft paper bag에서는 저장 6개월후에도 이취가 없었으나 LDPE film bag포장시 동진벼와 호진벼 모두 저장 4개월 후 이취가 났으며, 동진벼의 LDPE film bag포장시 4개월후부터 미분이 형성되었고 craft paper포장에서는 6개월 저장후 미미한 정도의 미분이 확인되었으나 호진벼는 포장재를 불문하고 미분이 형성되지 않았다. 식미치, 지방산도, 색도 b값, 백도, pH, 이취 및 미분형성을 기준으로 한 백미 저장가능기간은 상온에서 craft paper bag에서 동진벼가 $1{\sim}5$개월, 호진벼는 $1{\sim}3$개월이었고, LDPE film bag에서는 동진벼와 호진벼가 $2{\sim}3$개월이었으며 저온에서는 craft paper bag에서 동진벼와 호진벼가 $2{\sim}6$개월, LDPE film bag에서는 동진벼가 $5{\sim}6$개월, 호진벼가 $4{\sim}6$개월이었다. 안전저장기간은 상온저장시 craft paper bag에서 동진벼와 호진벼가 1개월, LDPE film bag에서는 2개월이었고, 저온저장시 craft paper bag에서 동진벼와 호진벼 모두 2개월이었으나 LDPE film bag에서는 동진벼 5개월, 호진벼 4개월로 추정할 수 있었으며 상온보다 저온이, craft paper bag 보다 LDPE film bag에서 2배이상 길었다. 따라서 백미의 LDPE film bag에 의한 저온저장으로 지방산도의 증가, 식미치 및 백도의 감소 등에 의한 품질저하를 억제하여 고품질을 유지할 수 있으므로 저온저장은 쌀의 품질유지에 필수적이라 할 수 있다.

벼 고온저장시 발아율, 지방산도 및 Lipoxygenase 활성의 품종간 차이 (Varietal Difference of Germination, Fat acidity, and Lipoxygenase Activity of Rice Grain Stored at High Temperature)

  • 김기영;이건미;노광일;하기용;손지영;김보경;고재권;김정곤
    • 한국작물학회지
    • /
    • 제52권1호
    • /
    • pp.29-35
    • /
    • 2007
  • 국내 및 일본에서 육성된 벼 품종을 고온 저장시 저장기간에 따른 발아율, 이화학적 특성, lipoxygenase의 활성 및 이들 상호관계를 검토하였다. 1. 고온저장($35^{\circ}C$)시 발아율, 현미 단백질, 지방산도 및 lipoxygenase 활성은 저장기간 및 품종 간 차이가 크게 있었으며 두 요인의 상호작용도 인정되어 저장기간별 품종 간 차이가 다르게 나타났다. 2. 고온저장에 의한 현미 단백질, 지방산도 및 lipoxygenase 활성은 저장기간이 길수록 증가하였던 반면, 발아율 및 도요식미치는 감소하는 경향이었다. 3. 지방산도와 발아율 간에는 부의 상관이 지방산도와 lipoxygenase의 활성은 정의 상관이 인정되었다. 4. 17개 품종을 발아율, 지방산도 및 lipoxygenase 활성을 고려하여 군집분석을 수행한 결과 2개의 그룹으로 구분되었다. I군에 속하는 품종은 오대벼, 상미벼, 운광벼, 일품벼, 남평벼, 일미벼, 동안벼, 중산벼, 추청벼, 히또메보레, 고시히까리 등 11개 품종으로 비교적 발아율이 높고 지방산도 및 lipoxygenase 활성이 낮았다.

Review of the Current Forage Production, Supply, and Quality Measure Standard in South Korea

  • Kim, Jong Duk;Seo, Myeongchon;Lee, Sang Cheol;Han, Kun-Jun
    • 한국초지조사료학회지
    • /
    • 제40권3호
    • /
    • pp.149-155
    • /
    • 2020
  • Cattle feeding in South Korea has been heavily dependent on domestically produced rice straw and imported grain. Around 42% of domestically produced rice straw is utilized for forage, and the remainder is recycled to restore soil fertility. Approximately 35% of round baleages were made with rice straw. However, higher quality hay is desired over rice straw. Due to increasing stockpiles of rice, there has been an economic burden on the government to store the surplus; therefore production of annual forage crops in rice fields has been further promoted in recent years. Hay import from the USA currently constitutes more than 80% of total imported hays. The main imported hays are alfalfa (Medicago sativa), timothy (Phleum pretense), and tall fescue (Festica arundinacea). The estimated forage required for cattle feeding was approximately 5.4 million MT in 2016. Domestically produced forage sates only 43% of that value, while low quality rice straw and imported hay covered the rest of demand by 33% and 20%, respectively. As utilization of domestically produced forage is more desirable for forage-based cattle production, long-term strategies have been necessary to promote domestic production of high quality baleage. One such strategy has been utilizing the fertile soil and abundance of fallow rice fields of western region of S. Korea to produce forage crops. Italian ryegrass (Lolium multiflorum) is the most successfully produced winter annual in the region and is approximately 56% of the total winter annual forage production. Forage sorghums (Sorghum bicolor), sorghum × sudangrass hybrids, and hybrid corn (Zea mays) produce a substantial amount of warm-season forage during summer. Produced forage has been largely stored through baleage due to heavy dew and frequent rains and has been evaluated according to S. Korea's newly implemented baleage commodity evaluation system. The system weighs 50% of its total grading points on moisture content because of its importance in deliverable DM content and desirable baleage fermentation; this has proved to be an effective method. Although further improvement is required for the future of forage production in South Korea, the current government-led forage production in rice fields has been able to alleviate some of the country's shortage for quality hay.

사료 제조에서 발효 가능한 탄수화물 이용과 가금 사료에서 효소의 처리에 관한 연구 (Utilization of Fermentable Carbohydrates in Feed Manufacturing and in Enzyme of Poultry Feed)

  • 남기홍
    • 한국가금학회지
    • /
    • 제33권3호
    • /
    • pp.239-248
    • /
    • 2006
  • 발효가 가능한 탄수화물을 이용하거나 효소 이용 및 사료가공 등에 관한 이해를 증진시키는 길은 닭의 분중 휘발성 유가물질의 감소를 가져올 수 있다. 전분질의 소화는 가루사료를 (밀과 보리) 알곡으로 대치하게 하였다. 그러나 근위의 pH로 볼 때 사료의 종류나 형태는 연속성이 떨어진다. 펠렛으로 만든 사료는 사료 요구율이 $0\siml2%$ 증진된다. 전분질의 소화는 xylase를 첨가하였을 때 대사 에너지(ME) 가는 35% 증진 효과가 잇는 것으로 보고되었다. 전분질의 이용과 전분질이 아닌 다당류(NSP)의 이용은 전분질을 포함한 알갱이 사료의 존재 즉 비 영양소 물질(ANF)의 포함 여부에 달려 있다. 사료 생산 기술의 증가는 $33^{\circ}C$에서 만들어지는 펠렛 사료에 이용될 수 있는 건조된 상태의 효소나 액체상태의 효소 생산 기법에 달려 있다. 수용성 NSP나 arabinoxylans 또는 beta-glucan 등은 부분적으로 효소 가격이 크기로 나누어지는 정도에 따라 달라진다. 적은 크기는 수분 흡수력이 감소되어야 하는데 만약 수분 흡수력이 지나치면 소화물에 수분이 너무 많아지게 되어 분에 수분 함량이 많아지며 사료 곡물 중에 비스코시티 현상이 생겨서 계란 껍질이 지저분해진다.