• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.97-105
• /
• 2017

Because asphalt is a solid at normal temperature and is not a hazardous material as stipulated in the Safety Management Act on Hazardous Materials, it is often recognized as having no risk of fire or explosion. On the other hand, it is as dangerous as flammable liquid because it is heated to $170-180^{\circ}C$ and stored in a storage tank. This study analyzed the risk of fire and explosion during the storage and handling of asphalt and the actual conditions of asphalt regulations by fire service organizations. Moreover, this study analyzed the domestic case of explosions in the production process of asphalt concrete (ASCON) and domestic and foreign cases of asphalt storage tank explosions. The analysis suggested that unlike Japan, Korea has no asphalt regulations in fire service organizations. Explosions can occur when ignition is delayed after fuel is sprayed on the dryer drum burner of the aggregates during the production of ASCON. A physical explosion can occur in the storage tank when environmental purification facilities suddenly work strongly to remove air pollutants or bad smells during the heating of asphalt in an asphalt storage tank. In addition, explosions can occur when fires such as welding is performed in the asphalt storage tank.

• The Journal of the Korea Contents Association
• /
• v.14 no.12
• /
• pp.999-1009
• /
• 2014

In this paper, $CO_2$ emission and storage amount are evaluated for real RC (Reinforced Concrete) underground structure considering $CO_2$ amount including material manufacturing, moving, and construction, repairing timing stage regarding extended service life. Four mix proportions with mineral admixtures are prepared and $CO_2$ diffusion coefficient are obtained based on a micro modeling. Referred to carbonation durability limit state, $CO_2$ emission and storage amount are evaluated, which shows higher initial $CO_2$ emission is caused due to larger unit content of cement and the storage increases with more rapid carbonation velocity. Furthermore various $CO_2$ concentration is adopted for simulation of $CO_2$ evaluation including measured $CO_2$ concentration (600ppm). With higher concentration of $CO_2$ outside, carbonation velocity increases. In order to reduce $CO_2$ emission through entire service life, reducing initial $CO_2$ emission through mineral admixture like fly ash is more effective than increasing $CO_2$ storage through OPC since $CO_2$ is significantly emitted under manufacturing OPC and $CO_2$ storage in cover concrete of RC structure is not effective considering initial concrete amount in construction.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.651-658
• /
• 2022

To cope with climate change, studies are being conducted on natural-based solutions (NBS) that reduce carbon by utilizing ecosystems and ecological resources ultimately to achieve carbon neutrality. In this study, carbon storage and economic value evaluations were conducted of the coastal land and sea of Busan using InVEST's Carbon and Coastal Blue Carbon models, which are ecosystem service-based evaluation models. As a result, it is estimated that the amount of carbon storage per unit area is lower than that of the entire Busan land area and that if the currently underway or planned development works are completed, the carbon storage of the coastal land areas would be decreased more. Coastal sea areas have less carbon storage than coastal land, but there is great potential for NBS that utilize ecological resources in the future. If the reclamation of public water affects important habitats with high carbon storage levels, it will reduce these levels, and such negative effects could last for a long time. For the sustainable management of Busan coastal areas, ecosystem service-based management strategies are needed considering carbon storage.

• Journal of Information Technology Applications and Management
• /
• v.26 no.3
• /
• pp.135-157
• /
• 2019

Information technology has economic, social and cultural impacts is closely linked to our lives. This information technology is becoming a key to the change of human civilization through connecting people and objects on the earth. In addition, future information technology is becoming more intelligent and personalized with the development of computing technology, and due to the rapid development of alcohol, environment without time and space constraint is realized, Is spreading. Since existing portable storage media are made of physical form, there is a limit to usage due to the risk of loss and limitation of capacity. Cloud services can overcome these limitations. Due to the problems of existing storage media, it is possible to overcome the limitations of storing, managing and reusing information through cloud services. Despite the large number of cloud service users, the existing research has focused mainly on the concept of cloud service and the effect of introduction on the companies. This study aims to conduct a study on individual characteristics that affect the degree of cloud use. We will conduct research on the causes of IT knowledge, personal perception of security, convenience, innovation, economical trust, and platform dependency affecting the intention to use the cloud. These results show that the variables affecting individual 's use of cloud service are influenced by individuals, and this study can be used as a basic data for individuals to use cloud service.

• Analytical Science and Technology
• /
• v.36 no.2
• /
• pp.80-88
• /
• 2023

Fingerprints play a crucial role in the identification of potential suspects in criminal cases. However, determining the actual time, i.e., the time at which the fingermark was deposited, is challenging. Herein, we investigated the persistence and aging of fingerprints over time by observing the time evolution of latent fingerprints on a polystyrene box stored in a dark room. Fingerprint samples that were stored for up to two years could be detected with maximum accuracy using a black iron-oxide-based emulsion (black emulsion). To estimate the time of fingerprint deposition, fingerprint aging was studied by analyzing the lipid components of the fingerprints after their development. Cholesterol and squalene were selected as indicators of fingerprint aging, and their ratio was estimated to assess aging. In the case of fingerprint samples stored in a dark room for up to one month after deposition, the cholesterol/squalene ratio was approximately 0.01; it increased gradually to ≥ 0.1 over six months. A substantial reduction in the levels of cholesterol and squalene from the initial levels was also noted. Cholesterol and squalene were not detected after one year of storage. Thus, the extent of aging could be determined by analyzing the aging indicators for up to six months. Two cases that could cause error in the estimation of the fingerprint deposition time, namely, heating of the fingerprint sample before development and storage of the developed fingerprints in a dark room, were also investigated.

• The KIPS Transactions:PartA
• /
• v.8A no.3
• /
• pp.217-226
• /
• 2001

In this paper, for continuous media access operations performed by Clustered Continuous Media Storage Server (CCMSS) system, we present the analytical model based on the open queueing network, which considers simultaneously two critical delay factors, the disk I/O and the internal network, in the CCMSS system. And we derive by using the analytical model the stochastic model for the total service delay time in the system. Next, we propose the integrated stochastic admission control model for the CCMSS system, which estimate the maximum number of admittable service requests at the allowable service failure rate by using the derived stochastic model and apply the derived number of requests in the admission control operation. For the performance evaluation of the proposed model, we evaluated the deadline miss rates by means of the previous stochastic model considering only the disk I/O and the propose stochastic model considering the disk I/O and the internal network, and compared the values with the results obtained from the simulation under the real cluster-based distributed media server environment. The evaluation showed that the proposed admission control policy reflects more precisely the delay factors in the CCMSS system.

• Journal of Internet Computing and Services
• /
• v.12 no.5
• /
• pp.11-19
• /
• 2011

In this paper, Service Boundary Line approximation method is proposed to improve the accuracy of aggregated link state information for source routing in transport networks that conduct hierarchical QoS routing. The proposed method is especially useful for aggregating links that have both delay and bandwidth as their QoS parameters. This method selects the main path weight in the network and transports the data to the external networks together with the aggregation information, reducing information distortion caused from the loss of some path weight during aggregation process. In this paper, the main path weight is defined as outlier. Service Boundary Line has 2k+5parameters. k is the number of outliers. The number of storage spaces of Service Boundary Line changes according to the number of outliers. Simulation results show that our approximation method requires a storage space that 1.5-2 times larger than those in other known techniques depending on outlier selection method, but its information accuracy of proposed method in the ratio between storage space and information accuracy is higher.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.5
• /
• pp.2310-2345
• /
• 2017

With the emergence of the Internet of Things (IoT) the world is projecting towards a scenario where every object in the world (including humans) acts as a sender and receiver of data and if we were to see that concept mature we would soon be talking of billions more users of the cloud networks. The cloud technology is a very apt alternative to permanent storage when it comes to bulk storage and reporting. It has however shown weaknesses concerning real-time data accessibility and processing. The bandwidth availability of the cloud networks is limited and combined with the highly centralized storage structure and geographical vastness of the network in terms of distance from the end user the cloud just does not seem like a friendly environment for real-time IOT data. This paper aims at highlighting the importance of Flavio Bonomi's idea of Fog Computing which has been glamorized and marketed by Cisco but has not yet been given a proper service architecture that would explain how it would be used in terms of various service models i-e IaaS, PaaS and SaaS, of the Cloud. The main contribution of the paper would be models for IaaS, PaaS and SaaS for Fog environments. The paper would conclude by highlighting the importance of the presented models and giving a consolidated overview of how they would work. It would also calculate the respective latencies for fog and cloud to prove that our models would work. We have used CloudSim and iFogSim to show the effectiveness of the paradigm shift from traditional cloud architecture to our Fog architecture.

• Journal of KIISE
• /
• v.42 no.12
• /
• pp.1480-1485
• /
• 2015

As SSDs are increasingly being used as high-performance storage or caches, attention is increasingly paid to the provision of SSDs with Quality-of-Service for I/O request streams of various applications in server systems. Since most SSDs are using the AHCI controller interface on a SATA bus, it is not possible to provide a differentiated service by distinguishing each I/O stream from others within the SSD. However, since a new SSD interface, the NVME controller interface on a PCI Express bus, has been proposed, it is now possible to recognize each I/O stream and schedule I/O requests within the SSD for differentiated services. This paper proposes Flash Operation Group Scheduling within NVME-based flash storage devices, and demonstrates through QEMU-based simulation that we can achieve a proportional bandwidth share for each I/O stream.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.97-105
• /
• 2021

In this paper, we propose BCON, a service that allows individuals to store personal contents safely, and reliably guarantee their ownership of contents, certifying their identities with DIDs(Decentralized identifiers). DID technology, which supports decentralized identification service based on a blockchain that cannot forgery or alter data, allows users to selectively provide their information, controlling personal information and reinforcing their sovereignty over their identity. BCON stores information about the content specified by a user on the blockchain and Authenticates the user's identity based on DID technology. It also provides functions for the user to safely upload and download the user's content to a distributed database. BCON consists of the content service verifier, the content storage service, the content management contract, and the user application, administrating rhe DID registry for Authority management.