• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.1
• /
• pp.8-14
• /
• 2007

This paper addresses the allocation planning of the storage location in a warehouse system that the dedicated storage method is used. In the discrete finite time period model, the demands for storage location of products are dynamic for time periods. The planning is to determine the reallocation time period and the storage location of the products in reallocation time period, which minimizes costs. The cost factors are the reallocation cost, the travel cost within warehouse and the surplus storage location cost. A model is formulated, and the property of optimal solution is characterized. The dynamic programming algorithm is developed, and a numerical example is shown.

• Journal of Korea Water Resources Association
• /
• v.43 no.6
• /
• pp.559-569
• /
• 2010

This study proposes an empirical method for estimating the concentration time and storage coefficient of a basin using the Nash unit hydrograph. This method is based on the analytically derived concentration time and storage coefficient of the Nash model. More fundamentally, this method recursively searches convergent number of linear reservoirs and storage coefficient of linear reservoir representing the basin given. This method is to overcome the problem of HEC-HMS to use an optimization technique to estimate the basin concentration time and storage coefficient. The proposed method was applied to the Bangrim station of the Pyungchang river basin, also found to estimate physically reasonable values.

• Journal of the Korean Society of Safety
• /
• v.25 no.6
• /
• pp.98-102
• /
• 2010

LPG (Liquefied Petroleum Gas) vehicles in metropolitan area are being applied to improve air quality and have been proven effective for the reduction of air pollutant. In addition, the demand of gas as an eco-friendly energy source has being increased. With the LPG filling station is also increasing every year. These gas stations are required to install the securest storage tank because of possibility of causing huge loss of life and property. Therefore, in this paper, underground containment type is proposed as installation of the LPG storage tank using Taguchi method, which is considered to be more safe, economical, efficient, easy checking and simple construction method than any other. If leakage, economics, real estate utilization rate, safety, easy to check, simple construct about above ground, buried underground and underground containment storage tank are analyzed by Taguchi method, real estate utilization rate, economic and safety in turn are improved. Therefore, the underground containment storage tank is a optimal installation technology.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.1040-1048
• /
• 2010

An infiltration storage can be installed as a method of reducing runoff from catchment and increasing stream flow during the dry period by recharging groundwater. However, there is no proper model and method that can be used to design storage capacity of an infiltration storage in Korea. The purpose of the study is to evaluate capacities of infiltration storages planned on Jeju-do in Korea by modifying Storm Water Management Model (SWMM). The basic equations for the infiltration storage are same as those of the infiltration trench used in MIDUSS. Infiltration rates of the infiltration storages were first measured by double ring infiltrometers, and then the modified model was applied to evaluate adequacy for the capacities of three infiltration storages planned on Jeju-do in Korea. The application results show that the two infiltration storages with higher infiltration rates have adequate capacities to infiltrate the total water inflow to the storages. However, the other infiltration storage with lower infiltration rates has not sufficient capacity to infiltrate the total water inflow to the storage and release occurs to the downstream region. The simulation model and method applied can be used for capacity evaluation of future infiltration storages on highly pervious areas in Jeju-do.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.5
• /
• pp.653-659
• /
• 2001

This paper is concerned with the development of a new method for making and separating ice in-water and saving floated ice by installing an evaporation panel in an ice storage tank. The new method shows very good heat transfer efficiency than that of the convectional method. It is because the evaporation panel is directly contacted with water in the storage tank. The experiments were performed by varying inlet and outlet refrigerant temperatures of its evaporator. From the experimental results, the operating characteristics of in-water harvest-type ice storage system were investigated by measuring temperature and pressure at each point of the ice storage system and power required to operating compressor respect to the changes of the inlet and outlet refrigerant temperature of evaporator. It can be think that defrost frequency decreased and heavy ice created as the refrigerant temperature of evaporator outlet and defrost setting temperature is low so gotten result can effect to release efficiency. Also, consumption power, condensing heat quantity, refrigerating capacity and performance efficiency decreased as time goes by. Therefore, these results provide the basic data for system optimization, performance improvement and the possibility of application to other fields.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.36 no.2
• /
• pp.44-55
• /
• 1994

This paper describes the development of real-time irrigation reservoir operation models that adequately allocate available water resources for paddy rice irrigation. Water requirement deficiency index(WRDI) was proposed as a guide to evaluate the operational performance of release schemes by comparing accumulated differences between daily release requirements for irrigated areas and actual release amounts. Seven reservoir release rules were developed, which are constant release rate method (CRR), mean storage curve method(MSC), frequency analysis method of reservoir storage rate(FAS), storage requirement curve method(SRC), constant optimal storage rate method (COS), ten-day optimal storage rate method(TOS), and release optimization method(ROM). Long-term forecasting reservoir operation model(LFROM) was formulated to find an optimal release scheme which minimizes WRDIs with long-term weather generation. Rainfall sequences, rainfall amount, and evaporation amount throughout the growing season were to be forecasted and the results used as an input for the model. And short-term forecasting reservoir operation model(SFROM) was developed to find an optimal release scheme which minimizes WRDIs with short-term weather forecasts. The model uses rainfall sequences forecasted by the weather service, and uses rainfall and evaporation amounts generated according to rainfall sequences.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.6
• /
• pp.718-731
• /
• 2003

SAN(Storage Area Network) was developed in response to the requirements of high availability of data, scalable growth, and system performance. In order to use the SAN more efficiently, most of the SAN operating software supports storage virtualization concepts that allow users to view physical storage devices of the SAN as a large volume. A logical volume manager plays a key role in storage virtualization. It realizes the storage virtualization by mapping logical addresses to physical addresses. In this paper, we design and implement an efficient and flexible mapping method for the logical volume manager. Additionally we also design and implement a free space management method for flexible mapping. Our mapping method supports a snapshot that preserves a volume image at certain time and on-line reorganization to allow users to add or remove storage devices to and from the SAN even while the system is running. To justify our mapping method, we compare it with the mapping method of the GFS (Global File System) through various experiments.

• Journal of Biosystems Engineering
• /
• v.19 no.3
• /
• pp.232-246
• /
• 1994

This study was conducted to develop the long-tenn storage method to minimize the black spot occurred on the surface of persimmons stored in the films at low temperature. The storage experiments were done with different films and persimmon varieties at $0^{\circ}C$ storage condition for 5 months, and then the physical and chemical characteristics of persimmons were tested monthly. The results were as follows : 1. The film 160 made from zeolites showed highest performance in well storings sweet persimmons for 5 months, compared with other films by eyesight. The initial moisture condensation inside the films seemed to cause the black spots on persimmons, and the effect of the film holes was never significant to prevent the black spots. 2. The sugar content was ranged from $14^{\circ}Brix$ to $15^{\circ}Brix$ regardless of film types and persimmom varieties, and it changed little for storage of 5 months. 3. The decrease rate of persimmom weight in the film 160 and 180 was 0.3% for storage of 5 months, while those in other films reached to 2%. The decrease rate of persimmon weight was least in the film 160 and 180. 4. The hardness of Fuyu least decreased in the films 160 and 380. It was changed from 36 kg/cnf to 8-27 $kg/cm^2$, and that of Charyang was from 31 $kg/cm^2$ to 8-10 $kg/cm^2$ for storage of 5 months. The hardness of Charyang rapidly decreased as storage period increased. 5. The average rate of black spot(defect rate) of Fuyu measured by a computer image processing system was least in the film 160 by 0.5%, but those in other films was ranged from about 5% to 20% for storage of 5 months. The rate of black spot of Charyang was less than that of Fuyu among most of films. 6. The intensity, hue, and saturation in persimmon color changed according to storage period. Especially, the intensity of persimmon colors decreased as storage period increased, but it was least in the film 160. 7. An integrated long-term storage method of sweet persimmons was suggested in the basis of the experiments and literature reviews.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.248-256
• /
• 2021

Now that we're in the big data era, data has taken on a new significance as the storage capacity has exploded from trillion bytes to petabytes at breakneck pace. As the use of cloud computing expands and becomes more commonly accepted, several businesses and institutions are opting to store their requests and data there. Cloud storage's concept of a nearly infinite storage resource pool makes data storage and access scalable and readily available. The majority of them, on the other hand, favour a single cloud because of the simplicity and inexpensive storage costs it offers in the near run. Cloud-based data storage, on the other hand, has concerns such as vendor lock-in, privacy leakage and unavailability. With geographically dispersed cloud storage providers, multicloud storage can alleviate these dangers. One of the key challenges in this storage system is to arrange user data in a cost-effective and high-availability manner. A multicloud storage architecture is given in this study. Next, a multi-objective optimization problem is defined to minimise total costs and maximise data availability at the same time, which can be solved using a technique based on the non-dominated sorting genetic algorithm II (NSGA-II) and obtain a set of non-dominated solutions known as the Pareto-optimal set.. When consumers can't pick from the Pareto-optimal set directly, a method based on Principal Component Analysis (PCA) is presented to find the best answer. To sum it all up, thorough tests based on a variety of real-world cloud storage scenarios have proven that the proposed method performs as expected.

• Korean Management Science Review
• /
• v.12 no.2
• /
• pp.31-42
• /
• 1995

The ordering method is used to reduce the fill-ins in interior point methods. In ordering, the data structure plays an important role. In this paper, first, we compare the efficiency and the memory storage requirement of the quotient graph structure and the clique storage. Next, we propose a method of reducing the number of cliques and a data structure for clique storage. Finally, we apply a method of merging rows and absorbing cliques and show the experimental results.