• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10a
• /
• pp.51-58
• /
• 1998

This study is to define the Automated Container Terminal(ACT) and container terminal system. Also, we analyze the present condition of the container terminal system in Pusan port and its automation level by systems approach. And this paper aims at evaluating on the priority of R&D investment until the beginning of the second stage of New Pusan Port Project(2006). In this process we have considered 8 factors (cost, labor, area, time volume, reliability, safety, convenience) to analyze 6 subsystems. The priority order of R&D until target year by sub-systems is as follow : Cargo Handling System〉Transfer System〉Port Entry System〉Storage System(Distribution&Manufacturing System included)〉Inland Transport System〉Port Information System.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.243-250
• /
• 1998

This study is to find subjects for the Automated Container Terminal(ACT) development and container terminal system. Also we analyze the present condition of the container terminal system in Pusan port and its automation level by systems approach. And this paper aims at evaluating on the priority of R&D investment until the beginning of the second stage of New Pusan Port Project(2006). In this process we have considered 8 evaluation indexes(cost, labor, area, time, volume, reliability. safety, convenience) to analyze 6 subsystems. The priority of R&D until target year by sub-systems is as follow: 1. Cargo Handing System, 2. Transfer System, 3. Port Entry System, 4. Storage System (Distribution & Manufacturing System included), 5.Inland Transport System, 6.Port Management & Information System.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.12
• /
• pp.98-103
• /
• 2019

With the increasing need for environmental protection, it is particularly important to improve the energy saving and reliability of refrigerators. Generally, the cold air flowing into the freezer compartment transits to the bottom of the refrigerating compartment, which can lead to uneven temperature distribution. This paper proposes two design solutions for improving the temperature distribution problem. Of these, the optimal refrigeration design was selected and tested using Computational Fluid Dynamics (CFD) modeling and simulation. The results showed improved uniformity of the temperature distribution inside the refrigerator, thus benefitting food storage while reducing energy consumption.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.33
• /
• pp.161-171
• /
• 1995

When physical distribution cost can be correctly measured, its management can also be efficient. Thus the primary objective of the study is to develop systems for measuring correctly physical distribution cost. The systems have two aspects : the One is the consumption of the resourses(materials, labor service, the other services), the other is the creation of physical distribution services(transportation, storage, cargo, packing, distribution conversion, management). By measuring the cost through the systems, the commoditization of the physical distribution services is possible and measurement of the cost and revenue can also be reasonable ,which makes its management efficient.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.239-254
• /
• 1995

Automated Storage/Retrieval (AS/R) systems have been used mostly in manufacturing or distribution industry in order to store or retrieve palletized items automatically. Since the items ore heavy or bulky, only one pallet at a time is moved by the stacker crane In this study, however, we introduce the "multi -load" AS/R system in which the items to be stored are data storage devices of equal size such as video tape or compact disc. Since the items are small and light multiple items can be stored and retrieved in each trip by using a magazine and a robot arm mounted on the crane Given the magazine capacity, and the locations of retrieval items and empty cells in the rack, the throughput of the multi-load AS/R system will depend on the selection of storage locations and the sequence of visits. We propose four heuristic algorithms for the multi-command. Computer simulation is used to evaluate the four algorithms in terms of throughput and number of back tracking of the crane.

• Progress in Superconductivity and Cryogenics
• /
• v.25 no.4
• /
• pp.65-69
• /
• 2023

Hydrogen is an eco-friendly energy source and is being actively researched in various fields around the world, including mobility and aerospace. In order to effectively utilize hydrogen energy, it should be used in a liquid state with high energy storage density, but when hydrogen is stored in a liquid state, BOG (boil-off gas) is generated due to the temperature difference with the atmosphere. This should be re-condensed when considering storage efficiency and economy. In particular, large-capacity liquid hydrogen storage tank is required a gaseous helium circulation cooling system that cools by circulating cryogenic refrigerant due to the increase in heat intrusion from external air as the heat transfer area increases and the wide distribution of the gas layer inside the tank. In order to effectively apply the system, thermo-hydraulic analysis through process analysis is required. In this study, the condenser design and system characteristics of a gaseous helium circulation cooling system for BOG recondensation of a liquefied hydrogen storage tank were compared.

• IE interfaces
• /
• v.17 no.4
• /
• pp.450-458
• /
• 2004

S-Distribution Center supplies parts to three plants of K-automobile manufacturing company. Since the three plants employ the JIT production system, it is important for S-Distribution Center to deliver small quantities of parts frequently and quickly on time. This paper presents a case study on the improvement of order-picking operation in S-Distribution Center. The study is focused on the reductions of move time and waiting time by redesigning the parts storage location, picking-order terminal location, retrieval policy, and equipment operation policy. The proposed operation system for S-Distribution Center is evaluated through a simple computation analysis and computer simulation. Furthermore, the reducible numbers of equipment and order pickers are investigated by performing a sensitivity analysis.

• IE interfaces
• /
• v.5 no.2
• /
• pp.75-85
• /
• 1992

A common problem for manufacturing industries, especially consumer goods industries, is how to establish standardized procedures for loading finished goods onto pallets or containers for subsequent storage and distribution. Utilizing previous research results on the palletizing problem, this paper develops micro-computer based programs which generate an optimum loading pattern leading to the minimum amount of unused pallet or container space. Development of pallet layout chart is also included in the computer programs. The results are displayed by computer-graphic. For the users who are unfamiliar with pallet loading problem and computer system, pull-down menu and user-computer interactive data input procedures are adopted.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.2
• /
• pp.353-360
• /
• 2016

Series hybrid electric vehicles (SHEVs) having multiple power sources such as an engine- generator (EnGen), a battery, and an ultra-capacitor require a power control unit with high power density and reliable control operation. However, manufacturing using separate individual power converters has the disadvantage of low power density and requires a large number of power and signal cable wires. It is also difficult to implement the optimal power distribution and fault management algorithm because of the communication delay between the units. In order to address these concerns, this approach presents a design methodology and a power control algorithm of an integrated power converter for the SHEVs powered by multiple power sources. In this work, the design methodology of the integrated power control unit (IPCU) is firstly elaborately described, and then efficient and reliable power distribution algorithms are proposed. The design works are verified with product-level and vehicle-level performance experiments on a 10-ton SHEV.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.1
• /
• pp.25-29
• /
• 1999

Time-temperature indicators (TTI) from three different companies obtained and were attached to food packages materials to evaluate degree of their color change according to storage time and temperature. Five temperature (-10 -5, 0, 5 and 10) was selected to represent standard freezing, refrigerating and room temperature, and evaluated performance by color change based on magnitude of color change and hunter system (L, a, b). Response end point was measured and recorded to find characteristic of each indicator. Comparison and discussion were conducted for accuracy and precision of each time-temperature. More research should be conducted at variable temperature and with various food to determine applicability of TTI on various storage condition.