• Architectural research
• /
• 제12권1호
• /
• pp.49-55
• /
• 2010

Stone powder sludge is a by-product of the manufacturing process of crushed sand. Most of it is dumped with soil in landfills, and the disposal of stone powder sludge causes a major environmental problem. This paper investigates the applicability of stone powder sludge in fly ashbased geopolymer. For this, stone powder sludge was used to replace fly ash at a replacement ratio of 50% and 100% by weight. The compressive strength of the samples was measured and scanning electron microscopy/ energy dispersive spectroscopy (SEM/EDS) analysis and X-ray diffraction (XRD) were performed. The test results indicated that the optimum level of the alkali activator ratio ($Na_2SiO_3$/NaOH) for fly ash-based geopolymer using stone powder sludge was 1.5. The strength development is closely related to the NaOH solution concentration. In addition, the compressive strength of the sample cured at $25^{\circ}C$ was significantly improved between 7 days and 28 days, even though the strength of the sample showed the lowest value at 7 days. Microscopy results indicated that a higher proportion of unreacted fly ash spheres remained in the sample with 5M NaOH, and some pores on the surface of the sample were observed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.552-560
• /
• 2004

Stone column is a soil improvement method and can be applicable for loose sand or weak cohesive soil. Since the lack of sand in Korea, stone column seems one of the most adaptable approach for poor ground as a soil improvement method. However, this method was not studied for practical application. In this paper, the most effective design parameters for the being capacity of stone column were studied. The parametric study of major design factors for single stone column was carried out under the bulging and general shear failure condition, respectively. Especially, a test result of single stone column by static load was compared with the bearing capacity values of suggested formulas. The analysis result showed that the ultimate bearing capacity by the formula was much less than the measured value by the static load test. Especially, the result of the parametric study under general shear failure condition showed that the bearing capacity has apparent difference between each suggested formulas with the variation of the major design parameters. Therefore, the result of this study can be a suggestion which is applicable for the field test and the future research.

• 정보처리학회논문지C
• /
• 제13C권1호
• /
• pp.11-18
• /
• 2006

최근의 해킹사고에서 침입자는 피해시스템에서 자신의 IP주소 노출을 피하기 위하여 피해시스템을 직접 공격하지 않고 Stepping stone(경유지)을 이용하여 경유지 우회 공격을 수행한다. 본 논문에서는 현재 네트워크 환경에서 Stepping stone을 이용한 경유지 우회 공격시 공격자의 근원지 주소를 추적하기 위한 알고리즘을 설계한다. 침입자 추적은 크게 두 가지 분류로 나뉘어 진다. 첫째는 IP Packet traceback, 둘째는 Connection traceback 이다. 본 논문에서는 Connection traceback에 공격을 다루며, 운영체제의 프로세스 구조를 이용하여 공격자 또는 Stepping stone을 구분하여 침입자의 위치를 추적한다.

• 한국공간구조학회논문집
• /
• 제8권5호
• /
• pp.67-74
• /
• 2008

요즘은 비선형해석과 유한요소해석이 가능하며 또 불연속면을 모델링을 통해 구현할 수 있도록 개발된 컴퓨터 프로그램이 개발되어 사용되고 있다. 그러나 석조구조물의 물성을 파악하지 않고서는 이러한 프로그램을 이용하여 실제거동을 예측하기가 매우 곤란하다. 이를 위해 석재와 석재의 접촉부의 강성의 변수를 사이부재를 가정하는 방식으로 수행하였으며, 실제 고유진동수를 측정하고, 석탑을 다자유도계 구조물로 가정하여 고유치 해석을 한 다음 이론상 고유진동수와 실제고유진동수가 일치하도록 접촉면의 강성을 조절하는 방식으로 모델링을 수행하였다. 연구를 위해 정림사지 오층석탑을 대상으로 구조모델링을 실시하였다. 본 연구결과는 석탑형 문화재에 대해 범용 프로그램을 이용한 구조모델링을 가능하도록 함으로써 주요 석탑형 문화재의 연직하중 뿐 아니라 진동이나 횡력에 대한 구조안전성 평가를 하는 과정에서도 유용할 것으로 기대된다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.78-83
• /
• 2008

There are many Korean traditional stone structures that have resisted successfully over more than several hundred years. However, their structural behavior is not investigated in engineering context yet. It is then difficult to predict how they behave against various loadings if they face. This paper is to investigate structural performance of the stone bridge structures based on the limit theorem. Structural performance of stone bridges are explained using possible collapse mechanisms with the corresponding thrusts whose values depend on the loads and the arch geometry.

• Computers and Concrete
• /
• 제18권1호
• /
• pp.99-112
• /
• 2016

Since the preservation of monuments is very important to human societies, different methods are required to preserve historic structures. In this paper, 3D model of arch stone bridge at Pont Saint Martin, Aosta, Italy, was simulated by 1660 integrated separate stones using ABAQUS$^{(R)}$ software to investigate the seismic susceptibility of the bridge. The main objective of this research was to study a method of preservation of the historical stone bridge against possible earthquakes using FRP techniques. The nonlinear behavior model of materials used theory of plasticity based on Drucker-Prager yield criterion. Then, contact behavior between the block and mortar was modeled. Also, Seismosignal software was used to collect data related to 1976 Friuli Earthquake Italy, which constitutes a real seismic loading. The results show that, retrofitting of the arch stone bridge using FRP techniques decreased displacement of stones of spandrel walls, which prevents the collapse of stones.

• 지구물리
• /
• 제6권3호
• /
• pp.125-130
• /
• 2003

The aim of this paper is to investigate the dynamic characteristics of ancient stone bridges in Korea and to find the factors influencing their natural frequencies. For this end, on-site free vibration tests were performed for 18 stone arch bridges and one ancient ice storage composed of 4 arches. Test results revealed that the vertical fundamental frequencies were in the range of 10Hz to 45Hz. The damping ratios estimated from the records of free vibration tests showed a wide variety of values, that is, from 0.02 to 0.134. It has been known that the natural frequencies of stone arch bridges are mainly governed by their arch spans. Test results reveal that the presence of spandrel walls and the use of mortar for joints are also important factors influencing the natural frequencies of stone arch bridges.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.76-77
• /
• 2014

Stone is one of the oldest and most popular materials used on the external wall because of its durability, abundance and aesthetic effect. However, there are two main problems in the existing pin hole construction method. One is uniformity of construction quality, and the other is a repair work of stone panels. Therefore, a new method is needed to overcome these problems. This paper presents a new stone curtain wall system using under cut anchor and secondary holes that was developed by authors. The improved quality and reduction of construction period can be obtained by this system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.396-404
• /
• 2009

This paper presents the results of numerical investigation on support mechanism of geogrid-encased stone columns for use in soft ground. A number of cases were analyzed using a axial- and 3D stress-pore pressure coupled model that can effectively model construction sequence and drainage as well as reinforcing effects of geogrid-encased stone columns. The results indicated that the geogrid encasement tends to significantly improve the load carrying of a stone column. Also revealed was that such a confinement effect depends on encasement length and stiffness of geogrid. It is also shown that there exist critical encasement length and stiffness of geogrid for a given condition.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.10-16
• /
• 1996

This study is aimed for investigating a decision of the saturated surface dry of crushed stone sand and measuring the moisture with increasing percentage of VFS(Very Fine Sand) replacement each crushed stone sand. The results indicated that moisture of crushed stone sand is generally increased with increasing percentage of VFS replacement and the rate of increase of moisture is about 30% every time that VFS replacement increases 3.5%. Also the saturated surface dry for crushed stone sane is proposed as a point of time where shape of flow-cone first slumps in this paper.