• 대한건축학회논문집:계획계
• /
• 제35권7호
• /
• pp.81-88
• /
• 2019

The purpose of this study is to investigate the relations between brick and stone brick pagodas in all classes of pagoda with their construction and shape. Research objects of this study are brick and stone brick pagodas of National Treasure and Treasure and masonry pagodas that are similar to brick and stone brick pagoda. This study includes checking preceding researches, drawing questions from these preceding researches, and finding answers from these questions. The results of this study are as follows. First, pagoda of Bunhwangsa Temple, the first pagoda in the Silla Dynasty, was built as a masonry pagoda, not a stone brick pagoda. Second, roofs of stone brick pagoda barrows from brick pagoda's techniques for performance of material and ease construction. Third, brick or stone brick pagodas' base have Type II that has low and extensive foundation with soil and stones usually. Forth, Korean pagodas are categorized by their materials, construction methods, and shapes. Wooden pagodas, stone pagodas, and brick pagodas are categorized by materials, post-and lintel pagodas and masonry stone pagodas are categorized by construction methods, and pitched roof pagodas and terraced roof pagodas are categorized by shapes. Fifth, masonry pagodas of Buddhism that have shape of multi-story building were developed from Doltap, traditional stone stack, and they advanced with brick pagodas and stone pagodas to terraced roof stone pagodas and post-and lintel base brick pagodas.

• 한국지구과학회지
• /
• 제40권1호
• /
• pp.46-55
• /
• 2019

본 연구는 광화문 월대로 사용된 석재를 대상으로 암석학적 연구를 활용한 석재공급지를 추정하기 위해 수행되었다. 월대는 2010년에 일부 구간이 다시 복원된 것으로 원부재인 담홍색 화강암과 신석재인 회백색 화강암이 사용되었다. 석재공급지 추정을 위해 북한산과 수락산의 지질조사를 수행하였으며 채취한 시료는 모두 담홍색 화강암과 유사한 특징을 보였다. 전암대자율은 북한산에 비해 수락산의 값이 크고 암석의 색에서 부분적인 차이를 보이지만 수락산이 상대적으로 선명한 담홍색을 띤다. 수락산은 월대에 사용된 원부재와 비슷한 암석기재적 특징, 전암대자율, 역사적 사료 그리고 야외조사 시 발견된 채석흔적 등을 통해 최종 복원용 석재공급지로 판단된다. 물성시험 결과, 월대 원부재는 풍화로 인해 147 MPa로 다소 낮은 수치를 보이며 석재공급지로 생각되는 수락산은 244 MPa 높은 값을 보여 안정성까지 확보되어 양질의 석재로 사용 가능하다. 수락산 일대는 주거지역이 일부 포함 되어 있어 행정적인 문제, 자연파괴, 인근 주민 생활권 침해가 발생하여 채석활동은 어렵다. 또 다른 대안으로 QAP조성, 광물조직, 암색 등의 암석학적특징 및 물리적 특성까지 유사한 중-조립질 담홍색화강암의 포천 창수석과 영중석을 제안할 수 있다.

• 대한치과보철학회지
• /
• 제37권3호
• /
• pp.383-394
• /
• 1999

The indirect technique for making cast restoration requires that dies be as accurate and durable as possible. Currently, stone is the most commonly used material for die. However, it has some problems such as the weakness in its strength and low abrasion resistance. Recently, epoxy resin die systems have become available. The purpose of this study was to examine two commercially available resin die systems and evaluate some characteristics for their clinical performance. This study evaluated the dimensional accuracy of epoxy resins and their wettability with impression materials. In this study, the first experiment was about dimensional accuracy of different die materials. The master model was made of stainless steel. 10 models were made of two epoxy resins (Die-epoxy, Tri-epoxy) and a die stone (Fujirock) each. Occlusal diameter (Dimension I), occluso-gingival height (Dimension II), and interabutment distance (Dimension III) were measured in each model. Next, the contact angles of die materials with impression materials were observed. The blocks were made of polyether, hydrophilic additional silicone, polysulfide impression materials. By drop-ping the same amount (0.05ml) of Tri-epoxy, Die-epoxy, and die stone on the blocks, 10 samples of each die material were made. After setting of materials, the contact angles were measured. The results of this study were as follows. 1. The expansion of stone die and the shrinkage of resin dies in occlusal diameter were observed, and stone and Tri-epoxy were expanded and Die-epoxy was shrinked in occluso-gingival height. There was little change among materials in interabutment distance (p<0.05). 2. In comparison with the master model Tri-epoxy had the least variation in measurement of the three die systems examined. Die-epoxy was next, and die stone showed the greatest variation. 3. The compatibility of die stone for polyether, hydrophilic additional silicone, polysulfide decreased in order, wherease epoxy materials had the decreased compatibility for polyether and polysulnde, hydrophilic additional silicone in order. It was not statistically different between polyether and polysulfide (p<0.05). 4. The contact angles of Tri-epoxy, Die-epoxy, die stone were getting bigger in order.

• 암석학회지
• /
• 제26권4호
• /
• pp.353-360
• /
• 2017

남한산성 외성은 성벽의 붕괴와 부재의 탈락으로 인해 보존처리가 필요한 실정이다. 이 연구에서는 남한산성 외성의 성벽부재를 대상으로 암석학적 연구를 실시하고 주변의 지질조사를 통해 산지를 추정함과 동시에 외성의 정비 시 활용 가능한 대체석을 제시하고자 한다. 남한산성 외성부재는 호상편마암, 안구상편마암, 화강암질편마암, 반상변정질편마암으로 이루어져 있으며 화강암질편마암이 가장 많이 사용되었다. 주변에 분포하고 있는 암석의 암석기재적 특징과 야외산상, 남한산의 채석흔적으로부터 남한산을 포함한 일대가 석재의 산지로 추정된다. 외성의 주요 축성재료들의 물성시험 결과와 축성에 사용된 부재의 현황을 종합한 결과 외성의 보수정비를 진행할 경우 대체석으로는 화강암질편마암이 적절할 것으로 판단된다.

• 자원리싸이클링
• /
• 제18권6호
• /
• pp.46-53
• /
• 2009

석재 가공 시 발생되는 석분은 산업폐기물로 되어있다. 현재 이 석분은 지하에 매립하거나 지상에 야적되어 방치되고 있어 폐기물로 처리하는 데 많은 비용이 요구되고 있고, 토질과 지하수 등의 환경오염의 원인이 되고 있다. 또한 콘크리트의 주재료인 골재의 공급이 부족한 현실을 고려하여 본 연구에서는 폐석분을 콘크리트 혼화재료로 재활용할 수 있는 가능성을 연구하고자 한다. 석분함유량에 대한 시멘트비를 조정한 결과, $20{\sim}30\;N/mm^2$의 콘크리트의 압축강도가 나타났고 이는 석분의 함유에 따라 압축강도가 감소되지 않음을 알 수 있었다. 석재 가공 시 발생되는 석분을 콘크리트 혼화재료로 재순환하여 사용하여도 콘크리트의 압축강도에는 전혀 문제가 없음을 알 수 있었다.

• 접착 및 계면
• /
• 제16권2호
• /
• pp.69-75
• /
• 2015

돌침대에 사용되는 석재의 무게를 줄여 경량화를 추구하려면 석재의 두께를 줄이고 보강재료로 석재의 강도를 유지해야 한다. 본 연구에서는 돌침대용 석재/목재 보드 개발에 대한 연구를 진행하였다. 돌침대에 삽입될 돌의 무게를 줄이기 위해 석재와 목재를 접합하였다. 목재의 강도 향상과 표면개질을 위하여 열처리 조건에 따른 목재의 물성변화를 관찰하였다. 대기 조건에서 열처리한 목재의 경우 고온의 온도에 따라 목재의 강성이 높아졌다. 열처리 최적조건은 표면에너지와 인장, 굴곡 강도변화 경향을 바탕으로 $100^{\circ}C$ 조건임을 확인하였다. 석재와 목재간 높은 접착력을 확보하기 위해 최적의 접착제 조성을 연구하였다. 아민계 에폭시 접착제, 폴리우레탄(PU)계 접착제, 염화고무계(CR) 접착제 마지막으로 염화비닐초산계 접착제에 따른 석재와 목재간 랩 전단실험을 진행하였다. 랩 전단 실험 후 파단면을 관찰해볼 때 에폭시 접착제를 이용할 때 목재 기지의 인열 파괴가 발생되었다. 접착면에서의 전단력이 목재 자체의 파괴 강도보다 높다는 결과를 바탕으로 최적의 접착제 조건이 에폭시계 접착제임을 확인할 수 있었다.

• 대한치과보철학회지
• /
• 제37권3호
• /
• pp.301-312
• /
• 1999

The purpose of this study was to compare the accuracy of currently used elastomeric impression materials for complete arch impression taking. Five elastomers (Impregum, Permlastic, Express, Extrude, Examix) and one Irreversible hydrocolloid (Aroma-fine) were tested. For each material, 5 impressions were made of stainless steel model to which five tapered posts were attached. Custom trays were used for polyether and polysulfide impression materials, and putty/wash two step technique was used for addition polyvinylsiloxane impression materials. Improved stone mod els were poured to all impressions. Accuracy of the materials was assessed by measuring ten distances on stone dies poured from impressions of the master model. All measurements for master and improved stone models were made with three dimensional measuring machine. The results were as follows 1. The dimensional accuracy of polyether, extrude, and examix were significantly superior to poly-sulfide, exress, and alginate in reproducing full arch mode (p<0.05) 2. There were no statistical differences in dimensional accuracy for full arch impression between polyether extrude and examix (p>0.05). 3. there were no statistical differences in dimensional accuracy between polysulfide, express, and alginate(p>0.05). 4. There were no statistical differences between addition polyvinyl siloxane materials (p>0.05) 5. There were no statistical differences between anterior-posterior and lateral dimensional changes of all impression materials (p>0.05).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.409-412
• /
• 2005

Because the underwater structures are subjected to the deterioration according to use environment, it is necessary to repair and reinforce when the durable performances are considered in structures. In generally, epoxy mortar is used to repair materials of underwater concrete. It is divided epoxy and filler which is organized cement and sand. Cement can be replaced by stone powder sludge in waste because the grading of stone powder sludge in drying state has similar to that of cement. As result of study, it is possible that stone powder sludge can be applied for replacement materials of cement in epoxy mortar, because the strength is not different when filler in epoxy mortar is alternated stone powder sludge.

• 소음진동
• /
• 제7권1호
• /
• pp.107-116
• /
• 1997

Friction between stone and saw of stone cutting machine generates the noise of 96-104 dB in the frequency range of 2kHz-8kHz, which may cause occupational hearing loss. By designing enclosures which are made of transparent acryl, PVC panel and absorption materials, about 15 dB noise reduction has been achieved in the stone cutting factory. It is demonstrated that this kind of enclosures can be effectively used to reduce the noise in the stone cutting factory.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1031-1038
• /
• 2005

Recently, due to lack of sand suppy, the cost of sand has increase. Therefore, alternative materials are needed. So, in this study the Crush Stone Compaction Pile used in America and Europe has been compared and analyzed Sand Compaction Pile used in Korea. Tests were performed at various sizes of Crush Stone and replacement ratio. Frist, it was compared and analyzed with low and high replacement ratio with the same size of crush stone. Second, it was compared and analyzed with different size of crush stone at constant replacement ratio. The result of these tests were compared with sand of the same replacement ratio. Here, the properties that were comares and analyzed are the ultimate bearing capacity and quantity of ground upheaval.